00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SWT-10S4 10" Subwoofer Bundle
$439.90
$999.99
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SWT-10S2 10" Subwoofer Bundle
$219.95
$999.99
2 Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features:
10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S2 package:
SWT-10S2 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 New Alpine SWT-10S4 10" 2000W Shallow Subwoofers Car Stereo Subs
$439.90
$800.00
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W12D2 Car Audio Dual 2 Ohm 12" Subwoofers with Sub Install Kit Package
$643.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type R2-W12D2 12 Inch 2250 Watt Max 2 Ohm Round Car Audio Subwoofer 2 Pack
$643.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Two R2-W12D2 12-Inch Dual 2 Ohm Subwoofers Bundle
$643.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Two R2-W12D2 R-Series 12-Inch Dual 2 Ohm Subwoofers Bundle
$643.90
$899.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-W12D2 Car Audio Type R Dual 2 Ohm 1500 Watt 12" Subwoofers with Sub Install Kit Package
$643.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine PWE-S8-WRA Compact powered subwoofer 8" Amplified Custom Fit for 2011-up Jeep Wrangler 4 door
$549.95
$850.00
Alpine PWE-S8-WRA 8" Amplified Custom Fit for 2011-up Jeep Wrangler (4 doors) - Under Seat Plug and Play 120 Watt Amplified Subwoofer
DISCREET, WITH A PUNCH
The small but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watts amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space.
SOUND CONTROL AT YOUR FINGERTIPS
Subwoofer controls like Phase, Gain, LP Crossover, and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to make bass level adjustments easily.General Features:
8-inch Compact Powered Subwoofer System
Compatible with 2011-Up Jeep Wrangler 4-door vehicles
Plug-and-play installation
Installs under the driver's seat
Works with an Alpine or aftermarket head unit or with the factory Jeep radio
Built-in 120 Watt Amplifier
Strong and Durable cast aluminum enclosure
Dimensions: 13.5"L x 3"D x 9"W
Authorized Dealer
1-year Manufacturer's Warranty
Note: Not compatible with the factory-equipped subwoofer system
What's in the box:
Amplified enclosure with one 8" subwoofer installed
80" Wiring harness (Power/ Ground/ Speaker level input)
Wrangler radio T-Harness (with in-line fuse holder)
Two 15 amp ATO fuses (one installed in the power wire fuse holder/ 1 spare)
Remote level control with 15' cable attached (3.5mm mini-plug on end)
Adhesive-backed hook and loop mounting fasteners (to mount the remote)
2 Wrangler mounting brackets
Eight M4x10mm Machine screws (each with a flat washer and split lock washer)
Four M6x10mm Machine screws
Fifteen 7" Zip ties
Installation instructions
Owner's manual (English/ French/ Spanish)
Warranty information
Online product registration information
System installation notice
Alpine PWE-S8-WRA owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate RFK4X 4 Installation Kit + P3D4-10 10" 1000W Subwoofer
$329.98
$550.00
Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + Rockford Fosgate RFK4X 4 AWG Complete Amplifier to Speaker Installation Kit
The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer
General Feature:
10" Punch P3 Series Dual 4 Ohm Subwoofer
Power Handling: Peak: 1,000 watts
Power Handling: RMS: 500 watts
Impedance: 4 ohm
Anodized aluminum heat sinking cone & dust cap for strength and durability
Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
Dual tear & fatigue resistant linear poly cotton spiders
Optimized motor magnetics with extended pole and bumped backplate
Fatigue-resistant and reduced-strain stitched tinsel leads
Multipoint high temp/strength neck joint bonding technique
Sturdy 16-gauge compound bend frame geometry
Semi-Flexible PVC removable protective motor cover
Custom insulated compression input terminal assembly
Proprietary spider venting/cooling technique
Decorative die-cast trim ring
Custom 10-AWG nickel-plated push terminals
High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar
Double-stacked ferrite magnet structure
Frequency response: 28-250 Hz
Sensitivity: 82 dB
Xmax: 13.9 mm
Mounting Depth: 6-1/4"
Cutout Diameter: 9-1/8"
Magnet Weight: 81 oz
Frequency Response: 28 - 250 Hz
Xmax: 15.9mm
Sensitivity: 82 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³
Recommended Sealed Enclosure: 0.59ft³
Magnet Weight: 81 oz
Frequency Response: 28 - 250 Hz
Xmax: 15.9mm
Sensitivity: 82 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³
Recommended Sealed Enclosure: 0.59ft³
Matching Amplifiers: (one subwoofer)
Rockford Fosgate R750-1D, Parallel @2ohms
Rockford Fosgate P1000X1bd, Parallel @2ohms
Rockford Fosgate R500X1D, Parallel @2ohms
Matching Amplifier: (two subwoofers)
Rockford Fosgate P1000X1bd, Parallel @1ohm
Rockford Fosgate R1200-1D, Parallel @1ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
New Rockford Fosgate P3D4-10 10" 1000W 4-Ohm Subwoofer + 10" Mesh Grille Insert
$219.99
$350.00
Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + P2P3G10 10" Mesh Grille
The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer
General Feature:
10" Punch P3 Series Dual 4 Ohm Subwoofer
Power Handling: Peak: 1,000 watts
Power Handling: RMS: 500 watts
Impedance: 4 ohm
Anodized aluminum heat sinking cone & dust cap for strength and durability
Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
Dual tear & fatigue resistant linear poly cotton spiders
Optimized motor magnetics with extended pole and bumped backplate
Fatigue-resistant and reduced-strain stitched tinsel leads
Multipoint high temp/strength neck joint bonding technique
Sturdy 16-gauge compound bend frame geometry
Semi-Flexible PVC removable protective motor cover
Custom insulated compression input terminal assembly
Proprietary spider venting/cooling technique
Decorative die-cast trim ring
Custom 10-AWG nickel-plated push terminals
High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar
Double-stacked ferrite magnet structure
Frequency response: 28-250 Hz
Sensitivity: 82 dB
Xmax: 13.9 mm
Mounting Depth: 6-1/4"
Cutout Diameter: 9-1/8"
Magnet Weight: 81 oz
Frequency Response: 28 - 250 Hz
Xmax: 15.9mm
Sensitivity: 82 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³
Recommended Sealed Enclosure: 0.59ft³
Magnet Weight: 81 oz
Frequency Response: 28 - 250 Hz
Xmax: 15.9mm
Sensitivity: 82 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³
Recommended Sealed Enclosure: 0.59ft³
Matching Amplifiers: (one subwoofer)
Rockford Fosgate R750-1D, Parallel @2ohms
Rockford Fosgate P1000X1bd, Parallel @2ohms
Rockford Fosgate R500X1D, Parallel @2ohms
Matching Amplifier: (two subwoofers)
Rockford Fosgate P1000X1bd, Parallel @1ohm
Rockford Fosgate R1200-1D, Parallel @1ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate P3D4-15 Punch P3 DVC 4 Ohm 15-Inch 600 Watts RMS 1200 Watts Peak Subwoofer
$279.99
$699.99
Rockford Fosgate P3D4-15 Punch P3 15" car subwoofer with dual 4-ohm voice coils 1200-Watt Peak (600W RMS)
The P3D4-15 is Rockford Fosgate's best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dustcaps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone areaup to 25% and a FlexFit basket for extreme installations. Best of all, a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance.
General Features:
15" Dual 4-ohm Punch Stage 3 Subwoofer
Power Handling: Peak 1200 watts
Power Handling: RMS 600 watts
Recommended power range: 300 - 700 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
Stamp Cast basket with integrated spider venting
Sturdy 16-gauge compound bend frame geometry
High modulus Kevlar re-enforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2.5" voice coil w/ spun-laced Nomex insulating re-enforcement collar
Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
Mounting Depth: 7.58"
Cutout Diameter: 13.94"
Magnet Weight: 96 oz
Frequency Response: 22.4 - 250 Hz
Xmax: 15.9mm
Sensitivity: 86 dB @ 1 watt / 1 meter
sealed box volume: 1.5-3.0 cubic feet
ported box volume: 2.66 cubic feet
grille not included
warranty: 1 year
Authorized Internet Dealer
One 15" Dual 4-ohm voice coil subwoofer
Trim ring
Twelve 1-1/8" Allen head screws
4mm Allen head bit
Installation/Operation manual (English/ French/ Spanish/ German)
Rockford Fosgate P3D4-15 owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.