Car Subwoofers (477)

Cerwin Vega V102DV2 10-inch Dual 2 Ohm Subwoofer 1100 Watt Car Audio Sub DVC Cerwin Vega 10" Subwoofer DVC Vega Series V102DV2 Cerwin Vega Mobile subwoofers are designed and engineered to produce extreme bass in your vehicle, and the V102DV2 10" dual 2-ohm subwoofer is no exception. Packing in an optimized high-powered motor structure along with a stamped carbon fiber polypropylene cone, this subwoofer is built to deliver you nothing but quality bass. Its structure also features a vented pole piece for additional cooling, ensuring you get the most out of your subwoofer. This compact sub also features Cerwin-Vega's signature red surround, so your system can look as good as it sounds. See below for more features and specifications.  General Features: 10" Dual 2 ohm Vega Series Subwoofer Power Handling: Peak: 1100 watts RMS: 400 watts Parabolic one-piece stamped carbon fiber polypropylene cone Double-stitched Vega red Santoprene surround 2.5" Voice Coil Vega concealed mounting gasket Proprietary Stamped Cast Vega Basket Design Top-mount depth: 5.43" Cutout Diameter: 8.82" Sensitivity: 85dB High power integrated impedance selector Optimized high-power single-stacked motor structure Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION XTR8SWD2 8 Inch Shallow Subwoofer 300 Watts RMS 2-Ohm DVC The XTR Series XTR8SWD2 from Orion is a standout 8-inch shallow subwoofer, meticulously designed to deliver substantial bass performance without occupying much space. It offers a robust 300W RMS and a maximum power output of 1200W, ensuring your audio experience is both powerful and immersive. This subwoofer features dual 2 ohm voice coils, which provide greater flexibility in wiring configurations and improve the unit’s ability to manage high power levels effectively. Ideal for installations where space is limited, its shallow mount design allows it to be placed in compact areas such as under seats or in small trunks, making it perfect for vehicles with space constraints. Despite its compact form, the XTR8SWD2 does not sacrifice sound quality. It ensures deep, resonant bass that enhances any car audio system. Orion's commitment to superior build quality is evident in the XTR8SWD2’s construction. It includes a heavy-duty frame and a cone made to endure rigorous bass outputs without distorting. This durable design ensures long-lasting performance, meeting the needs of even the most demanding bass enthusiasts. If you’re looking to upgrade your car’s audio system or construct a new one, the Orion XTR Series XTR8SWD2 shallow subwoofer is an excellent choice that expertly balances size, power, and sound quality for a truly exceptional listening experience. General Features:     Dual 2 Ohm Voice Coils: Flexible wiring options with 2" copper-wound coils for enhanced durability.     UV-Coated Paper/Fiber Cone: Delivers rigidity and superior sound responsiveness.     NBR Rubber Surround: Provides excellent durability and allows extensive cone movement.     Exclusive Heavy-Gauge Stamped Steel Basket: Increases structural integrity and reduces vibration.     Nickel-Plated Push Terminals: Ensure reliable and easy connections.     Shallow Mount Design: Perfect for installation in tight spaces without sacrificing performance.     Subwoofer Size: 8 (Inches)     Voice Coil Configuration: Dual 2-ohm     Power Handling (Peak): 1200 Watts     Power Handling (RMS): 300 Watts     Sensitivity: 83 dB     Frequency Response: 40 Hz - 300 Hz     Dustcap Material: Polypropylene     Cone Material: UV Coated Paper / Fiber Blend Cone     Surround Material: NBR     Magnet Information: Ceramic     Mounting Depth: 70mm / 2.76 (Inches)     Cutout Diameter: 180mm / 7.09 (Inches)     Overall Diameter: 218mm / 8.58 (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Orion XTR122D 2400W Peak (600W RMS) 12" XTR Series Dual 2-ohm Car Subwoofer Elevate Your Car Audio Experience: The Orion XTR122D 2400W Peak (600W RMS) 12" XTR Series Dual 2-ohm Car Subwoofer exemplifies excellence in engineering and audio performance. With its dual voice coil configuration, impressive power handling, and meticulous construction, this subwoofer promises a transformative and commanding in-car audio experience. Upgrade your car's sound system with the Orion XTR122D subwoofer and embrace deep, resonant bass that elevates your driving experience to new heights of auditory sophistication. Precision Engineering: The Orion XTR122D subwoofer offers uncompromising audio precision with a peak power handling of 2400 Watts and RMS power handling of 600 Watts.Dual 2-ohm Configuration: Featuring a dual 2-ohm voice coil setup, this subwoofer provides versatile wiring options for seamless integration into various audio setups.Superior Sound Reproduction: The UV-coated paper/fiber blend cone and Santoprene surround ensure faithful sound reproduction, maintaining clarity even under high-power conditions.Efficient Sensitivity: With a sensitivity rating of 87.38 dB, this subwoofer efficiently converts power into impactful sound, delivering dynamic and detailed bass response.Broad Frequency Range: The subwoofer's frequency response spans from 24 Hz to 250 Hz, capturing both the deep lows and intricate details of your audio content.Enhanced Cooling System: Designed for reliability, the subwoofer features an advanced cooling system to prevent overheating and ensure consistent performance.Flexible Impedance: The dual 2-ohm impedance configuration ensures compatibility with various amplifiers and audio systems, facilitating seamless integration.High-Quality Magnet: Equipped with a ceramic magnet structure, the subwoofer generates strong magnetic fields, contributing to accurate and resonant bass reproduction. General Features:     Subwoofer Size: 12" (Inches)     Voice Coil Configuration: Dual 2-ohm     Power Handling (Peak): 2400 Watts     Power Handling (RMS): 600 Watts     Sensitivity: 87.38 dB     Frequency Response: 20 Hz - 250 Hz     Voice Coil Diameter: 2 (Inches)     Dustcap Material: Polypropylene     Cone Material: UV Coated Paper / Fiber Blend Cone     Surround Material: Santoprene     Magnet Information: 55 Oz Ceramic     Mounting Depth: 158mm / 6.22 (Inches)     Cutout Diameter: 277mm / 10.91 (Inches)     Overall Diameter: 319mm / 12.56 (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Absolute Xcursion Series XS-1000 1500-Watt 10-Inch Single 4-Ohm Slim Shallow Car Subwoofer The Absolute XS-1000 Xcursion Series 10" subwoofer has the formula for hard-hitting bass, a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A sizeable High excursion foam surround helps to provide a smooth woofer path for accuracy, while the 40 oz. Magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The push spring terminals on this cast basket woofer ensure that your connection is secure and your sound is uninterrupted. The XS-1000 features single voice coils, offering versatility in wiring for high output or maximum efficiency, allowing you to tailor your system to your preference. This sub works well in a sealed or ported enclosure. General Features: 10" Single 4-Ohm Excursion Series Car Subwoofer Power Handling: 1500 Watts P.M.P.O Power Handling: 1000 Watts Max Power Handling: 300 Watts RMS Impedance: Single 4 Ohm Injected polypropylene poly-coated woofer cone for lower distortion Rubber woofer surround Metal basket with black painting Vented oversize backplate with extended pole piece Super slim, shallow mount design Push spring terminals Dust cap with Absolute logo 40 oz. Strontium magnet with rubber coating frequency response 27-1200 Hz sensitivity 86 dB Includes decorative trim ring Top-Mount Depth: 4-1/2" Ported Box Volume: 0.8 cubic feet Sealed Box Volume: 0.5 - 1.08 cubic feet Weight: 9.00lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JBL GT5-10 10-Inch Single-Voice-Coil Subwoofer The GT5-10D subwoofer features dual 4-ohm s and a vented motor structure and offers 1100 watts of peak power handling. The GT5-10D also features ’s the newest design, combining classic elements with modern ones. the GT5-10D handles 275W/1100W (RMS/Peak) power and offers nearly 20 percent higher Xmax than many competitors. With its fully vented motor structure and rubber-coated tinsel leads, the GT5-10D is able to withstand even the most intense bass assault. Unlike competing entry-level subwoofers, the GT5-10D is based on a solid motor structure featuring two large magnets covered by the classic rubber ring. Big bass with Polypropylene woofer coneRoad noise can destroy realistic audio that always requires true low frequencies. Polypropylene delivers rigidity, with good internal damping, and complete weather resistance. You get an impossible-to-miss increase in thumping bass. Outstanding audio output, low distortionWith 250 watts RMS and 1000 watts of peak power handling, the GT5-12 changes the experience of listening to your favorite music in your car. And a progressive spider gives better control for lower distortion at excursion limits. Exceptional venting for increased power handlingWoofer motor structures heat up during use, causing distortion, or power compression that reduces music’s dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver a more serious bang. General Features: JBL high-quality sound at very affordable prices High sensitivity design produces powerful sound Deep true bass with the polypropylene woofer cone Accurate frequency response Outstanding audio output low distortion Exceptional venting for increased power handling 10" Single 4 ohm GT Series Subwoofer Power Handling: Peak: 1100 watts / RMS: 250 watts Impedance: Single 4 ohms Polypropylene cone woofer Frequency response: 30-500 Hz Series: GT5 Size: 10" Nominal Impedance: 4 Ohms Frequency Response: 30Hz - 500Hz Sensitivity(2.83V/1m): 91dB Power Handling (RMS)275 Mounting Depth (in): 5-5/16 Mounting Cutout Diameter (in): 9-3/16 Mounting Cutout Diameter (mm): 233 External Diameter (mm): 264 Mounting Depth (mm): 151 External Diameter (in): 10-3/8 Diecast Aluminum: Proprietary Frame: steel frame Voice Coil: 10" dual-voice-coil subwoofer ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JL Audio 12TW1-4 TW1 Series thin-line 12" 4-ohm subwoofer General Features: 12" 4-ohm subwoofer mica-filled polypropylene injection-molded cone with rubber surround power range: 75-300 watts RMS peak power handling: 600 watts frequency response: 24-200 Hz sensitivity: 85.15 dB top-mount depth: 4.61" sealed box volume: 0.65 cubic feet ported box volume: 1.125 cubic feet mica-filled polypropylene injection-molded cone with rubber surround power handling: 300 watts RMS (600 watts peak) top-mount depth: 4.61" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JL Audio 10W6v3-D4 W6v3 Series 10" subwoofer with dual 4-ohm voice coils General Features: 10" subwoofer with dual 4-ohm voice coils mineral-filled polypropylene cone with rubber surround satin black cast-alloy basket power range: 200-600 watts RMS peak power handling: 1200 watts frequency response: 22-200 Hz sensitivity: 82.7 dB top-mount depth: 6-15/16" sealed box volume: 0.628 cubic feet ported box volume: 0.828 cubic feet grille not included Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-DB8V-TRK Dual 8” Alpine Halo S-Series Preloaded Truck Subwoofer Enclosure with ProLink™ General Features: • Unique Alpine Halo Design with ProLink™• Deep Bass Output• Great Low Frequency Extension• Side-Firing Cabin Loading Ports• Expandable width from 40” – 51” allows for compact, under-the-rear-seat installation in many full size trucks including: 2018+ RAM 1500 (Crew Cab), 2015+ Ford F-150 (Crew Cab), 2018+ GMC Sierra / Chevrolet Silverado (Crew Cab), 2020+ Jeep Gladiator and many other vehicle applications• Rubber, modular foot design accommodates trucks with uneven under-seat areas• Integrated amplifier tray for hideaway amp installation• Dimensions: 40” - 51”(Adjustable-W) x 8-3/4”(H) x 13-3/4”(D)• Dual 4Ω Subwoofers Wired in Parallel for a 2Ω Load• Frequency Response: 35Hz-215Hz• Vented Tuning Frequency: 36Hz• Sensitivity: 84dB• Power Handling: 600W RMS (300W x 2)• Compatible with S-A60M / S2-A60M & OPTIM8® (PXE-C80-88) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This combined with a front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.