Hot Deals | Absolute Pro Music – Page 897

Absolute ICB100 4/8 AWG 100 Amp in-line Circuit Breaker with Manual Reset with Manual Reset Car Auto Marine Boat Stereo $19.99 $39.99

Absolute ICB100 4/8 AWG 100 Amp In-line Circuit Breaker with Manual ResetThe 100 Amp Circuit Breaker will work as a substitute to your system's 100 amp fuse(s). If your amplifier(s) fuses add up to 100 amps in your system, this one is for you.The best thing about a circuit breaker is once you buy it, it will not "blow" as is the case with fuses. Call it a long-term investment...With the click of a button, you can reset the circuit (no switching of fuses, etc.) and your system will be pounding seconds later!Installation is a snap as you place the circuit breaker between the battery and component.General Features: Matches up with systems rated at 100 amps Can be used with 1 amplifier with a 100A fuse and also with systems with more than 1 amplifier Inline Circuit Breaker/Disconnect Fuse Holder 12V-24V DC Example Application: 2 amplifiers; the first amp has a 60 amp fuse and the second amplifier has a 40 amp fuse (60A + 40A = 100A) Saves time, money, and hassles of switching blown fuses Mount on Panel or Firewall Stops Power Surges from Damaging Your Amps Rubber Boots for water protection Save Your Money to Replacing Fuses Protects Your Trolling Motor From Electrical Damage Unique Push Button Reset can also be used as a Kill Switch Suitable for car audio/video system, Boat, trucks, buses, RV's, ATV Winches and marine and DC sound amplifier system overload protection Material: Plastic and metal Size: 3.94in (L) x 1.65in (W) x1.77in (H) Voltage: 12-24V DC Net weight: 84g Work Temperature: -10C to 50C (-14F to 122F). Connection way: Any side for positive, another is negative 1-year warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-21% sale

00
DAYS 00
HRS 00
MIN 00
SEC

MR DJ DGRT00-10 1/0 Gauge Crimp Ring Terminals Connectors 10-Pack (Red, Black) $15.99 $19.99

Mr DJ 10 Pack 1/0 Gauge Ring Terminal Connector Wire Crimp Cable Red/Black Boots- 5/16 General Features: 1/0 Gauge Red & Black Gold Power Wire Ring Terminal Connectors Gold Plated for Increased Power Flow to Maximum Conductivity Accepts 1/0 Gauge Wire Deep wire recesses 5 Red Boots/ 5 Black Boots of Crimp able Ring Terminals 5/16" Stud ring diameter 1/2" Wire Input Size Colored Rubber Boots for Easy Polarity Identification Quantity: 10 Terminals (5 Positive, 5 Negative) Includes (10) Crimp Ring Terminals (5) Red Positive (+) Crimp Terminals (5) Black Negative (-) Crimp Terminals Resealable high-end retail packaging Superior electrical contact Premium Quality- Heat Tested High current capability Resistant to corrosion ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-47% sale

MR DJ 1/0 Gauge Ring Terminal 10 Pack<br/> Ring Terminal 10 Pack 1/0 AWG Wire Crimp Cable- Red/Black 5/16

00
DAYS 00
HRS 00
MIN 00
SEC

MR DJ 1/0 Gauge Ring Terminal 10 Pack
Ring Terminal 10 Pack 1/0 AWG Wire Crimp Cable- Red/Black 5/16 $15.99 $29.99

Mr DJ 10 Pack 1/0 Gauge Ring Terminal Connector Wire Crimp Cable Red/Black Boots- 5/16 General Features: 1/0 Gauge Red & Black Gold Power Wire Ring Terminal Connectors Gold Plated for Increased Power Flow to Maximum Conductivity Accepts 1/0 Gauge Wire Deep wire recesses 5 Red Boots/ 5 Black Boots of Crimp able Ring Terminals 5/16" Stud ring diameter 1/2" Wire Input Size Colored Rubber Boots for Easy Polarity Identification Quantity: 10 Terminals (5 Positive, 5 Negative) Includes (10) Crimp Ring Terminals (5) Red Positive (+) Crimp Terminals (5) Black Negative (-) Crimp Terminals Resealable high-end retail packaging Superior electrical contact Premium Quality- Heat Tested High current capability Resistant to corrosion ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute GRT102-2 2 2/4 AWG Gauge 5/16 Ring Battery Terminal Adapters Marine Audio UTV US $14.99 $29.99

Absolute GRT102-2 One Pair 2 Gauge 5/16" Gold Plated Power and Ground Ring Battery Terminal Adapters Car Audio Marine Audio UTV From design, engineering, and construction, Absolute set screw ring terminals are built not only to look good but to maximize the performance of any audio system. Easily connect your battery to your system's amplifier with these high-quality terminals. The last thing you want to run into when making a power cable connection at the battery is a loose connection which is not only dangerous but there is a loss in voltage potential. Absolute offers high-quality ring terminals that feature a substantial set screw that securely tightens the power cable to the terminal ensuring an excellent connection. The ring is 5/16" in diameter which is commonly found on factory and aftermarket batteries along with other bolt points on most vehicles. The ring terminal can be used for either a positive or negative battery connection and features a gold-plated finish that looks great and offers the maximum current transfer.General Features: Absolute GRT102-2 One Pair 2 Gauge Gold Power Ring Terminal 2 Gauge Ring Terminal Gold plated for maximum conductivity Ideal for Power or Ground Cable 5/16" Hole Diameter Stud Size Fits 2 gauge wire Positive or negative power wire connections A set screw holds the wire tight and secures for maximum power transfer Ring Terminal 2 Pieces Finished in Gold Ultra Conductive Red/Blue Band to differentiate between positive and negative ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

MK Audio MRT2218R 500 pcs #8 Red MRT2218R 22/16 Gauge Vinyl Insulated Connectors Ring Terminal $49.99 $99.99

MK Audio 500 pcs MRT2218R 22/16 Gauge Insulated Connectors Ring Terminal General Features: 22/16 Gauge Ring Terminals Insulation has a tapered entry to make wire insertion easier 5 Bag of 100 pcs Nylon Insulated Red Color Ring Terminal Connector Ring terminals are Vinyl Insulated Electro-Tin plated for corrosion resistance Material: Copper + PVC + Tinplate Package Quantity:100pcs Wire range: 0.5-1.5mm² Bolt Diameter=M4, RV1.25-4S, #8 High-Quality Insulated Ring Terminals! A.W.G.: 22-16, Wire range: 0.5-1.5mm², Max current=19A Bolt Diameter=M4, RV1.25-4S, #8 Material: Copper + PVC + Tinplate, Package Quantity:100pcs Comply with all relevant US European standards Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-44% sale

00
DAYS 00
HRS 00
MIN 00
SEC

MK Audio MRT2218R 200 pcs #8 Red MRT2218R 22/16 Gauge Vinyl Insulated Connectors Ring Terminal $16.99 $29.99

MK Audio 200 pcs #8 Red MRT2218R 22/16 Gauge Vinyl Insulated Connectors Ring Terminal General Features: 22/16 Gauge Ring Terminals Insulation has a tapered entry to make wire insertion easier 2 Bag of 100 pcs Nylon Insulated Red Color Ring Terminal Connector Ring terminals are Vinyl Insulated Electro-Tin plated for corrosion resistance Material: Copper + PVC + Tinplate Package Quantity:100pcs Wire range: 0.5-1.5mm² Bolt Diameter=M4, RV1.25-4S, #8 High-Quality Insulated Ring Terminals! A.W.G.: 22-16, Wire range: 0.5-1.5mm², Max current=19A Bolt Diameter=M4, RV1.25-4S, #8 Material: Copper + PVC + Tinplate, Package Quantity:100pcs Comply with all relevant US European standards Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-46% sale

American Terminal SPL1614B 100pcs 16-14 AWG Lock Quick Splice Wire Terminals Snap Lock Blue 16-14 AWG

00
DAYS 00
HRS 00
MIN 00
SEC

American Terminal SPL1614B 100pcs 16-14 AWG Lock Quick Splice Wire Terminals Snap Lock Blue 16-14 AWG $12.99 $23.99

AMERICAN TERMINAL SPL1614B 16/14 Gauge Lock Quick Slide Auto-Tap ConnectorsBlue Mid-Line Quick Splice Connectors For 16-14 AWG Wire. Quick Splices are a Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Simply Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over The Wires and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in the Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires.Quick Splices Are A Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in The Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires.General Features: Gauge: 16-14 100pcs Lock Quick Splice Wire Terminals Color: Blue Conductor CSA (Cross Sectional Area): 1.5-2.5mm2 Wire Range: 0.75-2.5mm² Suits Cable / Wire Sizes: 16-14 AWG Ideal Used in Marine and Automobile Applications No Stripping of Wire Is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire High Quality Quantity:100 Pcs No Stripping of The Wire is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire ROHS Compliant & Ul Approved Temperature: 200°F Professional Installation Is Highly Recommended (Instruction Is Not Included) A Simple and Easy Way to Add Extra Wires onto Difficult-to-Reach Wiring Looms Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers The Metal Blade Cuts into The Insulation of Both Wires and Completes the Connection Idea When Soldering Solutions Are Not Suitable Quick Splice Wire Connector Material: Nylon 6/6 Easy Crimping with Normal Tool Size: 3x1.1cm Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers Colors: Blue Material: Nylon AWG Wire Range: 16-14 Gauge AWG Splice Terminal Type: Commoning Block Mounting: IDC Splice Terminal Variant: Splitter Cross-Sectional Area(CSA): 1.5-2.5mm2 Item Size: 30 * 19 * 14mm Package Size: 14 * 13 * 4.5cm / 5.51 * 5.12 * 1.77in Package Weight: Approx. 144g / 5.08oz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute 50pcs Quick Splice Wire Terminals Snap Lock Blue 16-14 AWG $11.99 $19.99

Absolute USA 50 PCS SPL1614B 16/14 Gauge Lock Quick Slide Auto-Tap ConnectorsBlue Mid-Line Quick Splice Connectors For 16-14 AWG Wire. Quick Splices are a Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in the Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires. Quick Splices Are A Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in The Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires.General Features: Gauge: 16-14 50pcs Lock Quick Splice Wire Terminals Color: Blue Conductor CSA (Cross Sectional Area): 1.5-2.5mm2 Wire Range: 0.75-2.5mm² Suits Cable / Wire Sizes: 16-14 AWG Ideal Used in Marine and Automobile Applications No Stripping of Wire Is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire High Quality Quantity:50 Pcs No Stripping of The Wire is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire ROHS Compliant & Ul Approved Temperature: 200°F Professional Installation Is Highly Recommended (Instruction Is Not Included) A Simple and Easy Way to Add Extra Wires onto Difficult-to-Reach Wiring Looms Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers The Metal Blade Cuts into The Insulation of Both Wires and Completes the Connection Idea When Soldering Solutions Are Not Suitable Quick Splice Wire Connector Material: Nylon 6/6 Easy Crimping with Normal Tool Size: 3x1.1cm Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers Colors: Blue Material: Nylon AWG Wire Range: 16-14 Gauge AWG Splice Terminal Type: Commoning Block Mounting: IDC Splice Terminal Variant: Splitter Cross-Sectional Area(CSA): 1.5-2.5mm2 Item Size: 30 * 19 * 14mm Package Size: 14 * 13 * 4.5cm / 5.51 * 5.12 * 1.77in Package Weight: Approx. 144g / 5.08oz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-46% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute 50PS Lock Quick Splice Wire Terminals Snap Lock YELLOW 10-12 AWG $10.99 $19.99

Absolute USA 50PCS SPL1012Y 10/12 Gauge YELLOW Lock Quick Slide Auto-Tap ConnectorsRED Quick Splice Connectors For 10/12 AWG Wire. Quick Splices are a Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in the Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires. Quick Splices Are A Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in The Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires.General Features: Gauge: 10-12 50pcs Lock Quick Splice Wire Terminals Color: YELLOW Conductor CSA (Cross Sectional Area): 1.5-2.5mm2 Wire Range: 4.0-6.0mm² Suits Cable / Wire Sizes: 10-12 AWG Ideal Used in Marine and Automobile Applications No Stripping of Wire Is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire High Quality Quantity:50 Pcs No Stripping of The Wire is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire ROHS Compliant & Ul Approved Temperature: 200°F Professional Installation Is Highly Recommended (Instruction Is Not Included) A Simple and Easy Way to Add Extra Wires onto Difficult-to-Reach Wiring Looms Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers The Metal Blade Cuts into The Insulation of Both Wires and Completes the Connection Idea When Soldering Solutions Are Not Suitable Quick Splice Wire Connector Material: Nylon 6/6 Easy Crimping with Normal Tool Size: 34.5x20.5mm Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers Colors: YELLOW Material: Nylon AWG Wire Range: 10-12 Gauge AWG Splice Terminal Type: Commoning Block Mounting: IDC Splice Terminal Variant: Splitter Cross-Sectional Area(CSA): 1.5-2.5mm2 Item Size: 40 * 19 * 14mm Package Size: 14 * 13 * 4.5cm / 5.51 * 5.12 * 1.77in Package Weight: Approx. 144g / 5.08oz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-45% sale

American Terminal SPL1614B 50pcs Lock Quick Splice Wire Terminals Snap Lock Blue 16-14 AWG

00
DAYS 00
HRS 00
MIN 00
SEC

American Terminal SPL1614B 50pcs Lock Quick Splice Wire Terminals Snap Lock Blue 16-14 AWG $9.99 $17.99

AMERICAN TERMINAL SPL1614B 50PCS 16/14 Gauge Lock Quick Slide Auto-Tap ConnectorsBlue Mid-Line Quick Splice Connectors For 16-14 AWG Wire. Quick Splices are a Fast and Easy Way to Splice into An ExistingWire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, and Fold the Top with The Metal Insert OverThe Wires and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in the Connector is Designed to CutThrough the Insulation and Make the Connection Between the Two Wires.Quick Splices Are A Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. InsertBoth Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the CapClicks into Place. The Metal Insert in The Connector is Designed to Cut Through the Insulation and Make the ConnectionBetween the Two Wires.General Features: Gauge: 16-14 100pcs Lock Quick Splice Wire Terminals Color: Blue Conductor CSA (Cross Sectional Area): 1.5-2.5mm2 Wire Range: 0.75-2.5mm² Suits Cable / Wire Sizes: 16-14 AWG Ideal Used in Marine and Automobile Applications No Stripping of Wire Is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire High Quality Quantity:50 Pcs No Stripping of The Wire is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire ROHS Compliant & Ul Approved Temperature: 200°F Professional Installation Is Highly Recommended (Instruction Is Not Included) A Simple and Easy Way to Add Extra Wires onto Difficult-to-Reach Wiring Looms Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers The Metal Blade Cuts into The Insulation of Both Wires and Completes the Connection Idea When Soldering Solutions Are Not Suitable Quick Splice Wire Connector Material: Nylon 6/6 Easy Crimping with Normal Tool Size: 3x1.1cm Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers Colors: Blue Material: Nylon AWG Wire Range: 16-14 Gauge AWG Splice Terminal Type: Commoning Block Mounting: IDC Splice Terminal Variant: Splitter Cross-Sectional Area(CSA): 1.5-2.5mm2 Item Size: 30 * 19 * 14mm Package Size: 14 * 13 * 4.5cm / 5.51 * 5.12 * 1.77in Package Weight: Approx. 144g / 5.08oz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute 50pcs 18-22 AWG Lock Quick Splice Wire Terminals Snap Lock Red 18-22 AWG $9.99 $19.99

Absolute USA 50PCS SPL1822R 18/22 Gauge RED Lock Quick Slide Auto-Tap Connectors RED Quick Splice Connectors For 18/22 AWG Wire. Quick Splices are a Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in the Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires. Quick Splices Are A Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in The Connector is Designed to Cut Through the Insulation and Make the Connection Between the Two Wires. General Features: Gauge: 18-22 50pcs Lock Quick Splice Wire Terminals Color: RED Conductor CSA (Cross Sectional Area): 1.5-2.5mm2 Wire Range: 0.75-2.5mm² Suits Cable / Wire Sizes: 18-22 AWG Ideal Used in Marine and Automobile Applications No Stripping of Wire Is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire High Quality Quantity:50 Pcs No Stripping of The Wire is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire ROHS Compliant & Ul Approved Temperature: 200°F Professional Installation Is Highly Recommended (Instruction Is Not Included) A Simple and Easy Way to Add Extra Wires onto Difficult-to-Reach Wiring Looms Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers The Metal Blade Cuts into The Insulation of Both Wires and Completes the Connection Idea When Soldering Solutions Are Not Suitable Quick Splice Wire Connector Material: Nylon 6/6 Easy Crimping with Normal Tool Size: 32x20mm Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers Colors: RED Material: Nylon AWG Wire Range: 18-22 Gauge AWG Splice Terminal Type: Communing Block Mounting: IDC Splice Terminal Variant: Splitter Cross-Sectional Area (CSA): 1.5-2.5mm2 Item Size: 30 * 19 * 14mm Package Size: 14 * 13 * 4.5cm / 5.51 * 5.12 * 1.77in Package Weight: Approx. 144g / 5.08oz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Patron 100pcs Lock Quick Splice Wire Terminals Snap Lock Blue 16-14 AWG $11.99 $23.99

Patron SPL1614B 16/14 Gauge Lock Quick Slide Auto-Tap ConnectorsBlue Mid-Line Quick Splice Connectors For 16-14 AWG Wire. Quick Splices are a Fast and Easy Way to Splice into An ExistingWire. No Stripping of The Wires is Necessary. Insert Both Wires into The Splice, and Fold the Top with The Metal Insert OverThe Wires and Squeeze Down with Pliers Until the Cap Clicks into Place. The Metal Insert in the Connector is Designed to CutThrough the Insulation and Make the Connection Between the Two Wires.Quick Splices Are A Fast and Easy Way to Splice into An Existing Wire. No Stripping of The Wires is Necessary. InsertBoth Wires into The Splice, Fold the Top with The Metal Insert Over the Wires, and Squeeze Down with Pliers Until the CapClicks into Place. The Metal Insert in The Connector is Designed to Cut Through the Insulation and Make the ConnectionBetween the Two Wires.General Features: Gauge: 16-14 100pcs Lock Quick Splice Wire Terminals Color: Blue Conductor CSA (Cross Sectional Area): 1.5-2.5mm2 Wire Range: 0.75-2.5mm² Suits Cable / Wire Sizes: 16-14 AWG Ideal Used in Marine and Automobile Applications No Stripping of Wire Is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire High Quality Quantity:100 Pcs No Stripping of The Wire is Necessary Quickest & Easiest Way to Splice, Split, Or Tap Wires Non-Corroding Metal Contact Blade, Durable Insulating Clam Body Fast and Easy Way to Splice an Electrical Circuit into An Existing Wire ROHS Compliant & Ul Approved Temperature: 200°F Professional Installation Is Highly Recommended (Instruction Is Not Included) A Simple and Easy Way to Add Extra Wires onto Difficult-to-Reach Wiring Looms Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers The Metal Blade Cuts into The Insulation of Both Wires and Completes the Connection Idea When Soldering Solutions Are Not Suitable Quick Splice Wire Connector Material: Nylon 6/6 Easy Crimping with Normal Tool Size: 3x1.1cm Slide the Connector Over the Existing Cable, Add the New Wire, and Squeeze with Pliers Colors: Blue Material: Nylon AWG Wire Range: 16-14 Gauge AWG Splice Terminal Type: Commoning Block Mounting: IDC Splice Terminal Variant: Splitter Cross-Sectional Area(CSA): 1.5-2.5mm2 Item Size: 30 * 19 * 14mm Package Size: 14 * 13 * 4.5cm / 5.51 * 5.12 * 1.77in Package Weight: Approx. 144g / 5.08oz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Hot Deals (11104)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER