Hot Deals (11106)

Alpine KTE-10G.3 10" Protective Subwoofer Grille for Alpine R2-W10D4 and R2-W10D2 10" subwoofers General Features: 10" Protective Subwoofer Grille Works with Alpine R2-W10D4 and R2-W10D2 10" subwoofers Includes metal mesh grille  Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Black metal mesh grille Installation instructions KTE-10G.3 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTX-C10LP License Plate Mounting Kit + Alpine HCE-C1100 Rear View Camera Alpine HCE-C1100 Universal backup camera surface-mount Back up betterAlpine's HCE-C1100 backup camera is an excellent addition to a new touchscreen car stereo. With low-light capability and a wide viewing angle, it will give you a perfect picture of what's behind your vehicle, day or night.This tiny camera measures less than one square inch, so it'll fit almost anywhere. The package includes a 21-foot cable with composite video RCA plugs that allows the camera to connect to any in-dash receiver or front-mount screen with a composite video input.Frame itGeneral Features: backup camera with standard composite (RCA) video cable mounting hardware and 21-foot power/video cable included compatible with any radio with an RCA video input (most aftermarket models, only a few factories) 1/4" CMOS image sensor color video output illumination range: 1.5 to 100,000 lux weather-proof camera housing warranty: 1 year MFR # HCE-C1100 What's in the HCE-C1100 package: HCE-C1100 owner's manual Rearview camera (attached 5' power/ground cable) 23' Composite video cable Mounting bracket Hex-key Rubber sleeve 4 Large screws 2 Small screws Owner's Manual Alpine KTX-C10LP License Plate Mounting Kit General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LEDs illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the KTX-C10LP package: KTX-C10LP owner's manual License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTX-C10LP License Plate Mounting Kit This product is solely the mounting kit. This package does not include the backup camera, which is required and sold separately. General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LEDs illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the KTX-C10LP package: License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Installation Manual Alpine KTX-C10LP owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-22WRA Jeep Wrangler JK Unlimited Weather Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources perfectly suited for your Jeep Wrangler JK Unlimited (incompatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for your Jeep's front and soundbar locations. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for awesome clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for various locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)Package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectorsincluded SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) Package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the PSS-22WRA package: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. The subwoofer includes a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018 - Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the PSS-23WRA package: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWE-S8-WRA 8" Amplified Custom Fit for 2011-up Jeep Wrangler (4 doors) - Under Seat Plug and Play 120 Watt Amplified Subwoofer DISCREET, WITH A PUNCH The small but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watts amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space. SOUND CONTROL AT YOUR FINGERTIPS Subwoofer controls like Phase, Gain, LP Crossover, and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to make bass level adjustments easily.General Features: 8-inch Compact Powered Subwoofer System Compatible with 2011-Up Jeep Wrangler 4-door vehicles Plug-and-play installation Installs under the driver's seat Works with an Alpine or aftermarket head unit or with the factory Jeep radio Built-in 120 Watt Amplifier Strong and Durable cast aluminum enclosure Dimensions: 13.5"L x 3"D x 9"W Authorized Dealer 1-year Manufacturer's Warranty Note: Not compatible with the factory-equipped subwoofer system What's in the box: Amplified enclosure with one 8" subwoofer installed 80" Wiring harness (Power/ Ground/ Speaker level input) Wrangler radio T-Harness (with in-line fuse holder) Two 15 amp ATO fuses (one installed in the power wire fuse holder/ 1 spare) Remote level control with 15' cable attached (3.5mm mini-plug on end) Adhesive-backed hook and loop mounting fasteners (to mount the remote) 2 Wrangler mounting brackets Eight M4x10mm Machine screws (each with a flat washer and split lock washer) Four M6x10mm Machine screws Fifteen 7" Zip ties Installation instructions Owner's manual (English/ French/ Spanish) Warranty information Online product registration information System installation notice Alpine PWE-S8-WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As more and more newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may be more complex than adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies, making it difficult to improve sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you to take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full-range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S has an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. The controller adds quick adjustability to your system if needed or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays of up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As more and more newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may be more complex than adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies, making it difficult to improve sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you to take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full-range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S has an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. If needed, the controller adds quick adjustability to your system, or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays of up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-S69C.2 Component 2-Way Speakers System 600W Peak R-Series 6x9" 2-Way Speakers FOR LIVING LOUD AND HAVING FUN If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation. EXCLUSIVE CONE TECHNOLOGY The R-Series speakers use Alpine’s exclusive cone technology, Carbon Fiber Reinforced Polymer (CFRP), which is a high-strength, lightweight material. CFRP can be custom formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks and increasing the speakers’ mid-bass performance and dynamic range. CFRP is also used as a tweeter diaphragm, enabling the speakers to perform into the 45kHz range and making them compliant with High-Resolution Audio playback. BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE The R-Series speakers use a neodymium magnet which gives them a shorter overall height, compared to other speaker brands. The R-Series speakers also use a new, shallower grill design. The result: An improved fitment design that lets the R-Series speakers fit into tighter install locations without sacrificing motor force. Product Details: Alpine R-S69C.2 Alpine R-Series 6"x9" 2-Way Component Car Speakers (Pair) Power Handling: RMS: 100 Watts Peak: 300 Watts Impedance: 4 Ohms Carbon-fiber reinforced polymer (CFRP) woofer Carbon-fiber reinforced polymer dome tweeter Frequency response: 60Hz - 40 kHz Sensitivity: 90 dB Top-mount depth: 2-7/8" Grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the R-S69C.2 package: 2 Woofers 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws 8 Speed-clips Eight M4x60mm Machine screws 8 Nuts 8 Flat washers 8 Split lock washers Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration notes Important Notice sheet Template and specs on the box R-S69C.2 Owner’s Manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4OR 4 Gauge Complete Amplifier Kit Package Includes: 1 Alpine S2-A60M, 1 Absolute KIT4 Amplifier Kit 4 Gauge Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier General Features: Alpine S-Series Mono Power Amplifier - S2-A60M 400W x 1 @ 4 Ohms RMS Power Output 600W x 1 @ 2 Ohms RMS Power Output S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Dimensions: 8” W x 8” H x 2.25” D Authorized Internet Dealer 1-year Manufacturer's Warranty Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme Today, I would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of 4 AWG high current power cable Three ft. of 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE S-S40 140 Watt 4" Coaxial 2-Way Car Audio Speakers Alpine's been building quality car speakers for decades, and their latest S-Series S-S40 4" speakers are no exception. If you've been living with anemic factory sound, this step-up in range, tone definition, and power handling will make you giddy just about every time you hop behind the wheel. And if you're really jonesing for a boost in sound quality, hook them up to a powerful aftermarket stereo or amp for increased performance. Worthy materials Alpine's carbon-fiber-reinforced plastic woofer cones provide next-level sturdiness but are also agile enough to handle the complexities of the midrange. Their high amplitude multi-roll rubber surround contributes to reduced distortion for a cleaner sound, while silk dome tweeters give you all the precise details that bring out the character of the instruments and vocals. If you've never experienced Alpine sound quality, these speakers are a great place to start. Grilles are not included; the factory grilles should be suitable for most applications. General Features: 4" S Series 2-way Coaxial Car Speakers Peak Power Handling: 280 watts per pair / 140 watts each RMS Power Handling: 90 watts per pair / 45 watts each Carbon Fiber cone material Rubber speaker surround 3/4" Silk Dome Tweeters Swivel application tweeters H.A.M.R surround Shallow mounting design Ferrite magnet motor structure Top-mount Depth: 1-3/4" Cutout Dimensions: 3-11/16" Impedance: 4 ohms Frequency Response: 97 - 22000 Hz Sensitivity: 86 dB Grilles not included Authorized Internet Dealer What's in the  S-S40 package: 2-way speakers 4x6 Adapter brackets 12" Lengths of speaker wire Eight 3/4" Screws Eight 5/16" Screws Eight 1/4" Screws 8 Speed clips 8 Spacers 2 Adhesive backed gaskets Warranty information Online product registration information Important Notice sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5 1/4-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S50 package: S-S50 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.