Class-D Amplifiers (311)

Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier Primed for performance, the R2-300X4 is a 300-watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology, which reduces the vehicle's electrical system demand. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases. General Features: Rockford Fosgate Prime R2-300X4 Class-D Full-Range 4-Channel Amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged output at 4 ohms bridged mode Total power output: 3000 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up 2/4 Channel Input Selection Switch Front and Rear Variable Input Gain adjustment level Continuously Variable on-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full Range Class D Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers 1 Year Warranty Low level: 125mV-5V High level: 250mV-10V Frequency Response: 20 Hz - 20 kHz Hz Total Harmonic Distortion (THD): <1% Variable high-pass filter: 50 - 250 Hz, 24 dB/octave Variable low-pass filter: 50 - 250 Hz, 24 dB/octave Recommended Fuse Rating: 60A Dimensions: 1.9" x "6.8" x "10.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-300X4 package: R2-300X4 Owner's Manual 4-Channel amplifier Two 7" Speaker input harnesses 3mm Allen Hex key Four 3/4" Screws 4 Flat washers Installation and Operation Instructions Certificate of Performance Rockford Fosgate contact information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JVC KS-DR2104DBT 600W Peak (200W RMS) DRVN Series Class-D 4-Channel Amplifier with Bluetooth Remote General Features JVC DRVN Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: Total power output: 300 watts Pulse Width Modulated MOSFET power supply Corrosion-Resistant Sealed Cast Aluminum Chassis Polymer Multi-Layer Capacitors are utilized to lower distortion levels The amplifier doesn't corrode in a saltwater environment. Vibration can damage the amplifier if it is not designed to withstand it. This amplifier passes a 3-axis multi-frequency vibration test. Dust entry is restricted to avoid damage to the amplifier The amplifier mounting section is made of 15/64 inch die-cast material to suppress vibration amplification. The thick heat-transfer sheet was placed on the substrate, and the Aluminum die cast heat sink was used to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enable maximum current flow and higher output for better low-frequency response and cleaner output. A Drain Tunnel Structure creates a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. High-quality PMLCAPs (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduces radiated noise, delivering smooth and accurate sound. Qualcomm Bluetooth 5.0 The Bluetooth antenna is housed inside the remote control. This provides a more sensible range for device connectivity, ensuring uninterrupted music playback. Versatile installation in tight spaces Protection against Immersion, up to 1 m (3 feet, 3 inches) depth This product passes a 3-axis multi-frequency vibration test Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Bass gain/level remote included Frequency Response: 10 - 20,000 Hz Signal Noise Ratio: 89 dB Variable high-pass filter: 50 - 200 Hz, 24 dB/octave Variable low-pass filter: 50 - 200 Hz, 24 dB/octave Variable Bass Boost: bass boost at 50 Hz Fuse Rating: 40A x 1 Dimensions: 7-13/16" W x 4-1/8" L x 1-15/16" H Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.