00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux VIMVW-92 VIM Activation for Volkswagen Vehicles w/ RNS-510 Navigation Systems
$184.95
$369.90
Crux VIMVW-92 VIM Activation for Volkswagen Vehicles w/ RNS-510 Navigation Systems
The CRUX VIMVW-92 is an interface that enables Video in-motion features in select Volkswagen vehicles that are equipped with MFD3 / RNS-510 Navigation Systems. Allows fixed menus & aftermarket safety devices to function with the factory-installed navigation system (e.g. safety vision rear-view cameras*).
General Features:
Retains functionality of Factory-installed Navigation System for passenger access at anytime
Allows for activation of video signal from aftermarket front or rear-view camera* ONLY – FOR FACTORY RADIOS THAT HAVE A VIDEO PORT
Designed for OEM equipment only
Plug & Play Installation
Note: *Interface does not have a video input
VEHICLE COMPATIBILITY
VOLKSWAGEN
2007 – 2012 Eos
2007 – 2013 Golf
2007 – 2013 Passat
2009 – 2013 Tiguan
2008 – 2010 Touareg
BENTLEY
2005 – 2010 Continental GT
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-APV Multi View Integration Interface for Select Volkswagen Vehicles
$369.95
$739.90
Crux RFM-APV Multi View Integration Interface for Select Volkswagen Vehicles
The Crux RFM-APV is a Multi View Integration Interface with 4 camera video inputs. The system seamlessly integrates with the factory installed system for adding Front, Rear, & 2 Side cameras. Uses the steering wheel control buttons or radio buttons to toggle between the inputs.
General Features:
– Adds reverse camera, front camera and 2 side camera inputs.– Uses the steering wheel control buttons or radio buttons to toggle between the inputs.– Turn signals automatically trigger the corresponding side camera.– Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics.– Interactive parking guide lines with calibration function.– Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines– Built-in on-screen display and setup.– 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear)
Compatibility:
2015 – Up2015 – Up Golf 7 Passat (B8)
Radio CompatibilityMIB/MIB2 – Discovery Pro 8” and Composition Media 6.5” monitorNOTE:Requires a multimedia player, which is located in the glove box.
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-APV Multi View Integration Interface for Select Porsche Vehicles
$369.95
$739.90
Crux RFM-APV Multi View Integration Interface for Select Porsche Vehicles
The Crux RFM-APV is a Multi View Integration Interface with 4 camera video inputs. The system seamlessly integrates with the factory installed system for adding Front, Rear, & 2 Side cameras. Uses the steering wheel control buttons or radio buttons to toggle between the inputs.
General Features:
Adds reverse camera, front camera and 2 side camera inputs.– Uses the steering wheel control buttons or radio buttons to toggle between the inputs.– Turn signals automatically trigger the corresponding side camera.– Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics.– Interactive parking guide lines with calibration function.– Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines– Built-in on-screen display and setup.– 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear)
Compatibility:
2017 – Up2017 – Up2017 – Up2017 – Up Boxster Cayenne Cayman 911 PCM 4.0
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-MB2 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System
$438.95
$877.90
Crux RFM-MB2 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System
RFM-MB2 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System ( NON-Navigation System). It integrates with the factory-installed system for adding Front, Rear, and left and right cameras. This unit uses the steering wheel control buttons to toggle between video sources.
General Features:
Adds front, right, left and rear camera inputs.– Uses the steering wheel control buttons to toggle between the camera sources.– Turn signals automatically trigger the corresponding side camera.– With OEM type interactive parking guide lines with calibration function.– On Screen Display set up.Notes:7” MBUX Systems without Navigation.
Compatibility:
2019 – 2020 Sprinter with MBUX SystemNAVIGATION / RADIO COMPATIBILITY7” MBUX Systems without Navigation
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-MB1 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System
$423.95
$847.90
Crux RFM-MB1 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System
RFM-MB1 is a Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System. It integrates with the factory-installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit uses steering wheel control buttons to toggle between video sources
General Features:
– Adds front, right, left and rear camera inputs.– Uses the steering wheel control buttons to toggle between the camera sources.– Turn signals automatically trigger the corresponding side camera.– With OEM type interactive parking guide lines with calibration function.– On Screen Display set up.Notes:Compatible with 7” or 10.25” MBUX Systems with Navigation.
Compatibility:
2019 – 2020 Sprinter with MBUX SystemNAVIGATION / RADIO COMPATIBILITY7” or 10.25” MBUX Systems with Navigation.
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-MG1 Multi-view Integration Interface with A/V Inputs for Chrysler, Dodge, Ram Vehicles with MyGig Radios
$315.95
$631.90
Crux RFM-MG1 Multi-view Integration Interface with A/V Inputs for Chrysler, Dodge, and Ram Vehicles with MyGig Radios
The CRUX RRFM-MG1 Multi-view Integration Interface with A/V Inputs for Chrysler, Dodge, and RAM Vehicles with MyGig Radios activates Video features in MYGIG Radios. Also, it provides additional Audio/Video input. It seamlessly integrates with the factory-installed system for adding Front, Rear, 2 Sides, and wireless cameras. This unit provides 6 video inputs, 1 A/V Input & 1 A/V output. This unit has VIM capability, and customers can automatically use turn signals to trigger the corresponding side camera. The turn signal camera trigger can be turned on or off using the SWC button.
General Features:
– Adds a reverse camera input, six videos, plus one audio/video input.– Uses the steering wheel controls buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button.– Has Video In Motion capability
Compatibility:
2011 – 2014 200
2008 – 2010 300/300C
2008 – 2010 Aspen
2007 – 2011 Sebring
2008 – 2017 Town & Country
DODGE
2007 – 2015 Avenger
2010 – 2012 Caliber
2008 – 2017 Caravan
2009 – 2014 Challenger
2008 – 2010 Charger
2008 – 2012 Dakota
2008 – 2013 Durango
2009 – 2010 Journey
2007 – 2012 Nitro
JEEP
2008 – 2010 Commander
2009 – 2017 Compass
2008 – 2013 Grand Cherokee
2008 – 2015 Liberty
2009 – 2017 Patriot
2007 – 2018 Wrangler
RAM
2009 – 2012 Ram
RADIO COMPATIBILITY
CHRYSLER
MYGIG Radios
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux VIMTY-05 VIM Activation w/ A/V Inputs for Select Toyota Vehicles 2012-Up
$99.95
$199.90
Crux VIMTY-05 VIM Activation w/ A/V Inputs for Select Toyota Vehicles 2012-Up
The CRUX VIMTY-05 enables Video in-motion features in Select Toyota vehicles that are equipped with Entune Radio Systems. It includes Audio / Video Inputs for adding aftermarket devices.
General Features:
Activates Entune Screen for enabling Video in Motion features
Retains Factory-installed functions for passengers use at anytime
Adds A/V Inputs and additional A/V Icon on OEM Screen
Built-in VIM capability — accessible from SWC*
Plug & Play Installation
Note: *(i) 9 button SWC using ENTER button, (ii) 5 button SWC using SEEK UP button.
VEHICLE COMPATIBILITY
TOYOTA
2012 – 2015 4Runner
2012 – 2015 Avalon
2012 – 2016 Camry
2014 – 2016 Corolla
2012 – 2014 FJ Cruiser
2012 – 2018 Highlander (with 6.1” screen only)
2012 – 2015 Land Cruiser
2012 – 2013 Matrix
2013 – 2016 Prius
2012 – 2015 RAV4
2012 – 2016 Sequoia
2012 – 2018 Sienna
2012 – 2018 Tacoma
2012 – 2018 Tundra
2012 – 2015 Venza
2012 – 2015 Yaris
SCION
2014 – 2015 iQ
2014 – 2015 tC
2014 – 2015 xD
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-UC1-AM Multi View Camera Integration for Aftermarket Radios in Dodge, Jeep & Ram Vehicles with Uconnect Systems
$315.95
$631.90
Crux RFM-UC1-AM Multi-View Camera Integration for Aftermarket Radios in Dodge, Jeep & Ram Vehicles with Uconnect Systems
RFM-UC1-AM, which is a Multi-View Camera Integration Interface for Aftermarket Radios. It’s a radio replacement interface with SWC and factory 3.5mm Aux port retention, a reverse camera, plus 6 video input interface for the Uconnect system. No camera is included in this kit, but optional cameras are listed on the manual.
General Features:
– Retains factory features in select Dodge, Jeep, and RAM vehicles while functioning with an aftermarket radio.– Retains Steering Wheel Controls via built-in, pre-programmed interface.– Retains factory 3.5mm Aux Port.– Adds a reverse camera plus 6 video inputs.– Uses the steering wheel controls buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the BACK button on the radio.Optional add on cameras are available to complete the multi-view capability of the RFM-UC1-AM. Cameras available and sold separately include:CDR-31C RAM Cargo Camera, CDR-02 RAM Tailgate Handle Camera, CUB-15 Adjustable Angle Side Camera, CCH-01G Jeep Grand Cherokee Backup Camera, CUL-16 Universal Lip Mount Backup Camera, CFF-01 Bullet Type Front Camera, CFF-02 Square Body Front Camera, & CFF-03 Grille Mount Front CameraNOTES:Compatible with 8.4”, 5” and 4.3” Uconnect Systems*
Compatibility:
DODGE2014 – 2015 Dart2014 – 2015 DurangoJEEP2014 – 2016 Cherokee2014 – 2016 Grand CherokeeRAM2013 – 2017 15002013 – 2017 25002013 – 2017 3500NAVIGATION / RADIO COMPATIBILITYCompatible with 8.4”, 5” and 4.3” Uconnect Systems*Heated Seats and Steering Wheels will not work.If you have a Dodge Ram Laremie with 2 camera system (the rear view camera goes to the rear view mirror & the cargo camera goes to the radio). Please contact technical support 818-609-9299 for further clarification.
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-UC1 Multi View Integration Interface with A/V Input for Dodge, Jeep & Ram Vehicles with Uconnect 8.4” Systems
$315.95
$631.90
Crux RFM-UC1 Multi View Integration Interface with A/V Input for Dodge, Jeep & Ram Vehicles with Uconnect 8.4” Systems
The CRUX RFM-UC1 is a Multi-Video integration Solution with A/V Input for Select DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input
General Features:
Adds a reverse camera input, 6 video plus 1 audio/video inputs.Uses the steering wheel controls buttons to toggle between the sources.Turn signals automatically trigger the corresponding side camera.Turn signal camera trigger can be turned on or off by using the BACK button on the radio.NOTES:Compatible with UCONNECT 8.4″ Systems
Compatibility:
DODGE2015 – 2017 Charger2015 – 2016 Challenger2014 – 2017 DurangoJEEP2014 – 2017 Grand CherokeeRAM2013 – 2017 15002013 – 2017 25002013 – 2017 3500NAVIGATION / RADIO COMPATIBILITYWith Uconnect 8.4” SystemsNOT compatible with 2018 Panasonic screens with CarPlay function.Heated Seats and Steering Wheels will not work.If you have a Dodge Ram Laremie with 2 camera system (the rear view camera goes to the rear view mirror & the cargo camera goes to the radio). Please contact technical support 818-609-9299 for further clarification.
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux VIMPR-90P VIM Activation for 2017-2018 Porsche Vehicles w/ PCM4/4.1 Navigation
$223.95
$447.90
CruxVI MPR-90P VIM Activation for 2017-2018 Porsche Vehicles w/ PCM4/4.1 Navigation
The CRUX VIMPR-90P is an interface that enables Video in motion features in 2017 - 2018 Porsche Vehicles w/ PCM4/4.1 Navigation Systems
General Features:
Retains functionality of Factory-installed Navigation System for passenger access at anytime
Allows onscreen access to Factory Bluetooth Keypad
Allows for Navigation Destination Address Entry at anytime
Designed for OEM equipment only
Plug & Play Installation
VEHICLE COMPATIBILITY
PORSCHE
2017 – 2018 911
2017 – 2018 718
2017 – 2018 Cayenne
2017 – 2018 Macan
2017 – 2018 Panamera
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux VIMPR-90 VIM Activation for Porsche Vehicles w/ PCM 2.1 Navigation Systems
$184.95
$369.90
VIM Activation for Porsche Vehicles w/ PCM 2.1 Navigation Systems
General Features:
Retains functionality of Factory-installed Navigation System for passenger access at anytime
Allows for activation of video signal from aftermarket front or rear-view camera* ONLY – FOR FACTORY RADIOS THAT HAVE A VIDEO PORT
Designed for OEM equipment only
Plug & Play Installation
Note: *Interface does not have a video input
PORSCHE 2005 – 2008 Cayenne (E1)
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux RFM-APV Multi View Integration Interface for Select Audi Vehicles
$369.95
$739.90
Crux RFM-APV Multi View Integration Interface for Select Audi Vehicles
The Crux RFM-APV is a Multi View Integration Interface with 4 camera video inputs. The system seamlessly integrates with the factory installed system for adding Front, Rear, & 2 Side cameras. Uses the steering wheel control buttons or radio buttons to toggle between the inputs.
General Features:
– Adds reverse camera, front camera and 2 side camera inputs.– Uses the steering wheel control buttons or radio buttons to toggle between the inputs.– Turn signals automatically trigger the corresponding side camera.– Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics.– Interactive parking guide lines with calibration function.– Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines– Built-in on-screen display and setup.– 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear)
Compatibility:
2013 – Up2016 – Up2018 – Up2015 – Up A3 (8V) A4 (8W) Q5 (B9) Q7 (4M)MMI Navigation Plus with MMI touch 7” or 8.3” MIB/MIB II main unit
NOTE:Requires a multimedia player, which is located in the glove box
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·