00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux BTCR-35X Bluetooth Interface Add hands-free calling, audio streaming, and an auxiliary input to the factory system in select compatible 2004-08 Chrysler, Dodge and Jeep vehicles
$124.99
$249.99
Crux BTCR-35X Bluetooth Interface Add hands-free calling, audio streaming, and an auxiliary input to the factory system in select compatible 2004-08 Chrysler, Dodge and Jeep vehicles
Upgrade to Bluetooth
Everybody wants the handy features of Bluetooth wireless in their car, but if your Chrysler-built vehicle dates from before the introduction of factory Bluetooth you're out of luck. Until now. Crux's BTCR-35X interface lets you add convenient hands-free calling and audio streaming to your Chrysler radio that you can operate with your steering wheel audio controls.Everything you need
The BTCR-35X package includes an interface module to enable your Bluetooth, a wiring harness that gives you plug-and-play installation, and a microphone you'll need for hands-free operation. When a call comes in, the module automatically mutes all audio sources and pauses streaming audio until the end of your call; streaming automatically resumes when the call ends. Digital signal processing (DSP) and echo cancellation give you the clarity you need so every word is understood.Steering wheel controls and Aux input
You can use your vehicle's steering wheel controls to answer and end calls, plus control Bluetooth music streaming. You'll hear your navigation app's voice prompts from the factory speakers while in Bluetooth mode. Once your phone or other device has been paired to the system, it will automatically re-connect to the Bluetooth interface. You'll also get an auxiliary stereo RCA audio input to give you even more ways to connect audio devices to your vehicle.
Product highlights:
Bluetooth adapter for factory radio
add hands-free Bluetooth calling and audio streaming to your factory radio
answer/end calls and control streaming audio with your steering wheel audio controls
automatically mutes audio and pauses streaming during calls
harness provides stereo RCA auxiliary input
package includes control module, wiring harness, and microphone
previously paired devices reconnect automatically
warranty: 1 year
What's in the box:
Crux BTCR-35X Bluetooth® Interface owner's manual
Bluetooth interface adapter
Harness
Microphone (attached 13' cable terminated by a proprietary connector)
Visor bracket (pre-installed on mic)
Tape
Instructions
Vehicle Compatibility: The BTCR-35X is compatible with the following 2005-2008 Chrysler, Dodge, and Jeep vehicles that are equipped with a factory RAQ, RAK, or REC radio.
Make Model YearChrysler 300 2005-2007Aspen 2007PT Cruiser 2006-2008DodgeCaliber 2006-2008Charger 2005-2007Dakota 2005-2007Durango 2004-2007Magnum 2005-2007Ram Truck 2006-2008Jeep Commander 2006-2007Compass 2007-2008Grand Cherokee 2005-2007Patriot 2007-2008
Bluetooth 2.0: Thanks to built-in Bluetooth 2.0 with support for HFP and A2DP/AVRCP, you can enjoy hands-free communication and wireless audio streaming from your Bluetooth-enabled smartphone through your vehicle's factory radio and steering wheel controls. The BTCR-35X supports multi-device pairing, but only one device can be connected for calls and playback at a time. The BTCR-35X also allows any previously paired smartphone to automatically re-connect to the add-on Bluetooth interface inside your vehicle.
Hands-Free Communication: The Crux BTCR-35X adds Bluetooth hands-free communication to your vehicle's factory radio with DSP and Echo-Cancellation for clear conversations on both sides of the phone call. Using your vehicle's steering wheel controls (if equipped), you can answer and end your Bluetooth-enabled smartphone's calls. You will still need to use your smartphone to make phone calls and to view caller ID information. An external wired microphone is included to carry on your side of the conversation, while the other party is heard through your vehicle's front speakers. The BTCR-35X will automatically mute any source as soon as a call is received, and resumes when a call is ended.
Wireless Audio Streaming: The BTCR-35X adds 4-channel Bluetooth audio streaming to your vehicle's factory radio. You'll be able to wirelessly stream stored music, music apps, and other audio content (such as Navigation apps) from your Bluetooth-enabled smartphone to the add-on Bluetooth interface and your vehicle's factory radio. You can operate Play/Pause and Previous/Next Track functions from your vehicle's steering wheel controls (if equipped). Advanced music browsing and song/artist/album information will still need to be done from your Bluetooth-enabled smartphone. The BTCR-35X supports the standard SBC codec for Bluetooth (not compatible with aptX or AAC). The BTCR-35X will automatically pause Bluetooth audio streaming when a hands-free call is received and will resume when the call is ended.
Note: The Crux BTCR-35X will use your vehicle's XM source function to access the add-on Bluetooth interface as a source. Your vehicle's steering wheel controls will toggle between XM radio and Bluetooth by pressing and holding the Source button.
Aux Input: In addition to Bluetooth, the Crux BTCR-35X provides an analog Aux input. The Aux input consists of a set of stereo RCA jacks and allow you to connect an external portable audio source to your factory radio..
Mounting Options: The Crux BTCR-35X comes with a bracket that can clip onto your vehicle's sun-visor or pillar. It also includes a piece of tape to surface mount it above your steering column or on the dash.
Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra (AXDI-CH5) XSVI-6523-NAV 2013-up Dodge RAM / Dart CAN Interface Wire Harness + 40-EU55 Antenna
$129.99
$199.99
Metra Axxess XSVI-6523-NAV Wiring Interface Connect a new stereo and retain Retained Accessory Power in select 2013-up Ram 1500 models without the factory touchscreen display + 40-EU55 Antenna
Interchangeable Part Number: AXDI-CH5
The XSVI-6523-NAV interface from Axxess lets you connect your new car stereo to your Ram's factory wiring harness. It provides the power, ground, and speaker connections for hooking up your new car stereo. This interface also supports Retained Accessory Power (RAP), which keeps the music going until the door is opened.If you're installing a navigation receiver, the XSVI-6523-NAV wiring interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need. You can plug the Axxess steering wheel interface (sold separately) directly into this interface, and keep your steering wheel audio controls working with your new car stereo.
General Features:
Accessory and Navigation Interface
Compatible with 2013-2016 Ram, Chrysler, Dodge
Used in non-amplified systems or when replacing an amplified system
USB updatable
Provides parking brake, reverse, and V.S.S. NAV outputs
High-level speaker input
Retains R.A.P. (Retained Accessory Power)
Prewired Axxess ASWC-1 harness included (ASWC-1 not included)
Authorized Internet Dealer
1-year Manufacturer's Warranty
Compatibility List:Chrysler:
2015 - 2016 2001
Dodge:
2013 - 2016 Dart2
Fiat:
2014 - 2016 500L
2016 500X
Jeep:
2014 - 2016 Cherokee Sport
2015 - 2016 Renegade
RAM Truck:
2013 - 2016 1500/2500/35003
2013 - 2016 Chassis Cab 3500/4500/55003
2014 - 2016 Promaster4
2015 - 2016 Promaster City
What's in the box:
Axxess XSVI-6523-NAV Wiring Interface owner's manual
Replacement radio interface module (attached vehicle/radio/SWC harness)
Application/Wiring sheet
Compatibility note:
The Axxess XSVI-6523-NAV interface will not work with Ram models with the factory 8" touchscreen display. If the factory Alpine audio system is present, this interface can be used, although new speaker wires must be run to the output section of the factory amplifier.
Compatible only with the LX Model equipped with a 3" DisplayNot compatible with 8.4" DisplayNot compatible with 8" DisplayOnly compatible with a 5" Display
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PAC SWI-CP2 Universal Steering Wheel Control Interface w/ Analog & Data
$79.00
$119.99
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch Vehicle Selection
The ControlPRO SWI-CP2 retains the built-in steering wheel controls in vehicles when replacing the factory radio with an aftermarket radio. It is compatible with today’s most popular vehicles, even with more complex electronic systems, including CAN bus, GMLAN, and Class II systems. The simple-to-use module can be configured in multiple ways, via DIP switches, directly from a USB-connected PC, or through a button learning procedure. Wiring and vehicle configuration switch settings are provided through the ControlPRO Web-APP and Mobile APPs for Android and iOS devices. The SWI-CP2 is designed to minimize installation time much faster than any other products available in the market today.
General Features:
Easy to Use and Time-Saving
Works on Analog (resistive) and Data SWC Systems
Vehicle Configuration by:-DIP Switch, vehicle lookup, and switch setting provided by ControlPRO APPs (PC, iOS & Android)-Direct flash from ControlPRO APP for PC (USB connection required)
Button learning mode
Customizable Button Functions
Provides 2 Amp, 12V ACC Output (Data-bus applications)
Compatibility Notes:
It does not retain the HVAC controls found in some General Motors vehicles
What's in the SWI-CP2 package:
PAC SWI-CP2 Steering Wheel Control Adapter owner's manual
Steering wheel control interface module
2' Wiring harness
2' SWC harness
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch Vehicle Selection
$79.00
$119.99
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch Vehicle Selection
The ControlPRO SWI-CP2 retains the built-in steering wheel controls in vehicles when replacing the factory radio with an aftermarket radio. It is compatible with today’s most popular vehicles, even with more complex electronic systems, including CAN bus, GMLAN, and Class II systems. The simple-to-use module can be configured in multiple ways, via DIP switches, directly from a USB-connected PC, or through a button learning procedure. Wiring and vehicle configuration switch settings are provided through the ControlPRO Web-APP and Mobile APPs for Android and iOS devices. The SWI-CP2 is designed to minimize installation time much faster than any other products available in the market today.
General Features:
Easy to Use and Time-Saving
Works on Analog (resistive) and Data SWC Systems
Vehicle Configuration by:-DIP Switch, vehicle lookup, and switch setting provided by ControlPRO APPs (PC, iOS & Android)-Direct flash from ControlPRO APP for PC (USB connection required)
Button learning mode
Customizable Button Functions
Provides 2 Amp, 12V ACC Output (Data-bus applications)
Compatibility Notes:
It does not retain the HVAC controls found in some General Motors vehicles
What's in the SWI-CP2 package:
PAC SWI-CP2 Steering Wheel Control Adapter owner's manual
Steering wheel control interface module
2' Wiring harness
2' SWC harness
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Audio Control LC7i 6-channel line output converter with bass restoration — adds aftermarket subs and amps to a factory system (Black)
$229.99
$499.98
Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black)
AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems.
General Features:
8-channel line output converter with auxiliary input
8 speaker-level inputs (each can handle up to 400 watts RMS)
internal channel summing
1 pair of RCA auxiliary inputs
8 preamp outputs (up to 8.5 volts RMS)
level matching controls with Maximized Indicator LED
Other Features:
wired remote controls auxiliary and subwoofer levels
AutoMode™ turns 6-channel input to 8-channel output
GTO™ signal-sensing turn on
12-volt turn-on lead output
recommended fuse rating: 2 amps
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AXDI-PO4 M.O.S.T. 25 Amp Interface for 2004-09 Porsche
$359.99
$450.00
Axxess AXDI-PO4 Radio Replacement Interface w/ M.O.S.T 25 amp for Porsche 2004-2009 Cayenn
General Features:
Provides accessory power
Retains R.A.P. (retained accessory power)
Designed for amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
Retains balance
Micro-B USB updatable
Authorized Internet Dealer
1-year Manufacturer's Warranty
Compatible vehicles:Porsche
911 (997): 2004-2009
Boxster (987): 2004-2009
Cayman (987c): 2004-2009
What is in the AXDI-PO4 package:
AXDI-PO4 interface
AXDI-PO4 amplifier interface
AXDI-PO4 harness
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface & 40-CR10 Chrysler 2001-Up Car Antenna Adapter
$99.99
$189.99
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface AXSWC One Interface to Control Them All & 40-CR10 Chrysler 2001-Up Car Antenna Adapter
New Replaced Part Number: AXSWCFinally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo—introducing the Axxess ASWC from Metra Electronics. This universal steering wheel interface is brand new and designed to simplify the installation process for the installer. Unlike other steering wheel interfaces, the ASWC-1 requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle—no more tedious programming of each button. The ASWC-1 features an LED status light that flashes according to the programming, informing you when the sync is complete. It is simple. Just plug it in, and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to do the programming manually, Axxess has left that as an option.Ready for Any Aftermarket StereoNo matter what type of vehicle or aftermarket stereo you plan to install, the ASWC-1 has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC-1 will connect and interface with the vehicle. Plus, the Metra ASWC-1 can be updated. This means that the interface will never be outdated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC-1!General Features:
Universal Steering Wheel Control Interface for Aftermarket Receivers
Model: ASWC-1
Does not require any programming
Works with the 2013 Nissan Altima sedan
A car stereo requires a wired steering wheel remote input
Can be manually programmed to function the way that the user wants the device to function
Designed for use with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, Clarion, Jensen, Dual, Power Acoustik, Soundstream, Valor, Visteon, and more. (Contact us with your model if we didn’t list it.)
Automatically detects the vehicle OEM interface and will program itself to it
Automatically detects the aftermarket radio and sets the steering wheel control functions
The ASWC-1 programs itself to the components it is being installed with
New LED with dual colors to make it easier to read the diagnostic feedback
Updatable with a micro "B" connector (Metra update cable part number USB-MINI-CAB)
The fastest and easiest way to retain steering wheel controls when installing an aftermarket stereo
Included in Package:
ASWC-1 Interface
12 Pin Harness with Male 3.5mm Connector
Female 3.5mm connector with brown and brown/white wires
12K Ohm Resistor
Installation Manual
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ASWC-1 Metra Axxess Universal OEM Steering Wheel Control Interface Module
$69.99
$99.99
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface AXSWC One Interface to Control Them AllFinally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo—introducing the Axxess ASWC from Metra Electronics. This universal steering wheel interface is brand new and designed to simplify the installer's life. Unlike other steering wheel interfaces, the ASWC-1 requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle—no more tedious programming of each button. The ASWC-1 has an LED status light that will flash according to the programming and inform you when the sync is done. It is simple. Just plug it in, and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to do the programming manually, Axxess has left that as an option.Ready for Any Aftermarket StereoNo matter what type of vehicle or aftermarket stereo you plan to install, the ASWC-1 has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC-1 will connect and interface with the vehicle. Plus, the Metra ASWC-1 can be updated. This means that the interface will never be outdated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC-1!General Features:
Universal Steering Wheel Control Interface for Aftermarket Receivers
Model: ASWC-1
Does not require any programming
Works with the 2013 Nissan Altima sedan
Car stereo requires a wired steering wheel remote input
Can be manually programmed to function the way that the user wants the device to function
Designed for use with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, Clarion, Jensen, Dual, Power Acoustik, Soundstream, Valor, Visteon, and more. (Contact us with your model if we didn’t list it).
Automatically detects the vehicle OEM interface and will program itself to it
Automatically detects the aftermarket radio and sets the steering wheel control functions
The ASWC-1 programs itself to the components it is being installed with
New LED with dual colors to make it easier to read the diagnostic feedback
Updatable with a micro "B" connector (Metra update cable part number USB-MINI-CAB)
The fastest and easiest way to retain steering wheel controls when installing an aftermarket stereo
Included in Package:
ASWC-1 Interface
12 Pin Harness with Male 3.5mm Connector
Female 3.5mm connector with brown and brown/white wires
12K Ohm Resistor
Installation Manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PAC SWI-RC Steering Wheel Control Interface SWI-RC-1
$79.99
$199.99
PAC SWI-RC1 Steering Wheel Control Interface retain the factory steering wheel audio controls
You can control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input.
Retains steering wheel control functions when replacing the factory radio
Retains programming even if the vehicle's battery is disconnected
General Features:
Quick and easy pre-programmed button function by DIP switch selection
Works on Analog (resistive) and Data SWC systems
For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC
Supports classic, SWI-RC style button programming
Customizable button functions (short press/long press/button reassignment)
Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications)
Compatible with all late-model brands of radios with 3.5mm or two-wire connections
To be compatible, the aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone-style jack or Blue/Yellow wire) (e.g., a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you must use the SWI-X.
The following Kenwood models are not compatible: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U, and KDC-X798. These models must be used with the SWI-CP5.
Clarion model CZ500 does not support remote Bluetooth controls
JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PAC SWI-CP2 Steering Wheel Control Interface retain factory steering wheel Adapter
$79.99
$199.99
PAC SWI-CP2 Steering Wheel Control Interface retain factory steering wheel audio controls
Control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input.
Retains steering wheel control functions when replacing the factory radio
Retains programming even if the vehicle's battery is disconnected
General Features:
Quick and easy pre-programmed button function by DIP switch selection
Works on Analog (resistive) and Data SWC systems
For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC
Supports classic, SWI-RC style button programming
Customizable button functions (short press/long press/button reassignment)
Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications)
Compatible with all late-model brands of radios with 3.5mm or two-wire connections
The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you will need to use the SWI-X.
Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5.
Clarion model CZ500 does not support remote Bluetooth controls
JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input.
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux CNS-01N License Plate Light Camera for 2010-2017 Nissan NV200
$49.95
$99.90
Crux CNS-01N License Plate Light Camera for 2010-2017 Nissan NV200
Nissan NV200 Camera
General Features:
Vehicle Specific Rear View Backup CameraCompatible with 2010-2017 Nissan NV200Mounting Style: License Plate FrameNTSC/PAL TV SystemViewing Angle: 170°Guidelines: YesInvert Image: NoWaterproof: YesResolution: 480 TV LinesParking Line Delete: YesIllumination: 0.2 LUXColor: BlackDimensions: 4.8"L x 3"W x 2.5"H
Compatibility:
2010 – 2017 NV200
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crux CMB-17C Trunk Handle Camera For 2015-2017 Mercedes-Benz C300
$103.95
$207.90
Crux CMB-17C Trunk Handle Camera For 2015-2017 Mercedes-Benz C300
Camera for Mercedes-Benz C300 2015-Up
General Features:
Vehicle Specific Trunk Handle Rear View Backup CameraCompatible with 2015-2017 Mercedes-Benz C300Mounting Style: Tailgate Handle MountNTSC/PAL TV SystemViewing Angle: 170°Guidelines: YesInvert Image: NoWaterproof: YesResolution: 480 TV LinesParking Line Delete: YesIllumination: 0.4 LUXColor: BlackDimensions: 9"L x 3.5"W x 2.75"H
Compatibility:
2015-2017 Mercedes Benz C-Class
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·