Car Bypass Modules & Interfaces (310)

Crux RFM-WR1 Multi View Integration Interface with A/V Input for Jeep Wrangler with MyGig Radio The CRUX RFM-WR1 Multi-View Integration Interface with A/V Input for Jeep Wrangler with MyGig Radios. It enables the activation of Video features in MYGIG Radios and also provides an additional Audio/Video input. It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input & 1 A/V output. This unit has VIM capability and customers can use turn signals to automatically trigger the corresponding side camera. Turn signal camera trigger can be turned on or off by using the SWC button. General Features: – Adds a reverse camera input, 6 video plus 1 audio/video inputs.– Uses the steering wheel controls buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button.– Has Video In Motion capability Compatibility: JEEP2007 – 2018 Wrangler ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux VIMVL-98B VIM Activation for Select VOLVO Vehicles with Sensus 2014 Navigation System The CRUX VIMVL-98B is an interface that enables Video in motion features Select Volvo Vehicles with Sensus 2014 Navigation Systems.     General Features: Retains functionality of Factory-installed Navigation System for passenger access at anytime Allows onscreen access to Factory Bluetooth Keypad* Allows for Navigation Destination Address Entry at anytime* Designed for OEM equipment only Subject to capability of Factory-installed Navigation System. Vehicle Compatibility VOLVO 2014-Up S Series 2014-Up V Series 2014-Up XC60 2014-Up XC70 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-GM29 Multi-View Integration Interface for GM LAN 29-Bit Vehicles The Crux RFM-GM29 is a Multi-View Integration Interface with six camera video inputs. The system seamlessly integrates with the factory-installed system for adding Front, Rear, 2 Sides, and wireless cameras. General Features: Adds a reverse camera input plus six more video inputs. It uses the factory steering wheel control buttons to view the video sources. Turn signals automatically trigger the corresponding side camera. The turn signal camera trigger can be turned on or off using the SRCE button on the SWC. Ability to toggle from back-up camera to cargo camera and trailer camera while in reverse gear NOTE:If your vehicle is not equipped with a factory backup camera, you must have the radio code at the dealership for a backup camera. Compatibility: BUICK 2008-2015 Enclave 2006-2011 Lucerne CADILLAC 2006-2009 DTS 2007-2014 Escalade 2007-2009 SRX CHEVROLET 2007-2013 Avalanche 2007-2008 Equinox 2008-2013 Express Van 2006-2013 Impala / Impala SS 2006-2007 Monte Carlo 2007-2013 Silverado 1500-3500 Pickup 2007-2014 Suburban 2007-2014 Tahoe 2009-2015 Traverse GMC 2007-2015 Acadia 2008-2013 Savana 2007-2013 Sierra 1500-3500 Pickup 2007-2014 Yukon HUMMER 2008-2009 H2 PONTIAC 2007-2009 Torrent SATURN 2007-2010 Outlook 2008-2009 Vue SUZUKI 2007-2008 XL7 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Crux RFM-FD8 Multi View Integration Interface with Side Mirror Mounted Cameras for Ford F-150 with 8” Sync 3 System The Crux RFM-FD8 is a Multi View Integration Interface with Side Mirror Mounted Cameras for Ford F-150 with 8” Sync 3 system. It integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and it uses the steering wheel control buttons to toggle between the sources. General Features: Adds a reverse camera input plus 6 video inputs.– Uses the steering wheel control buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button.NOTES:Compatible with Ford F150 with 8” screen (with removable OEM side mirror camera cover at the bottom) Compatibility: 2016 – 2018 F150 with 8” screen (with removable OEM side mirror camera cover at the bottom)Notes:Not compatible with vehicles equipped with a factory 360 system.This product allows to add front and side cameras to 2017 + vehicles equipped with a factory backup camera.GPS SYNC will not be retained when the blindspot cameras are activated in vehicles equipped with factory navigation ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-FD4 Multi View Integration Interface with Side Mirror Mounted Cameras for Ford F150 with 4” Full Color Screen The Crux RFM-FD4 is a Multi View Integration Interface with Side Mirror Mounted Cameras for Select Ford F150 with 4” Full Color Screen. The system seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs General Features: – Adds a reverse camera input plus 6 video inputs.– Uses the steering wheel control buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button.NOTES:Compatible with Ford F150 with 4″ Full Color ScreensNot compatible with telescopic type side mirrors Compatibility: 2016 – 2018 F-150 (with removable OEM side mirror camera cover at the bottom)NOTE: Not compatible with telescopic type side mirrors ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux VIMVL-98A VIM Activation for Select Volvo Vehicles with RTI 2011 Navigation System The CRUX VIMVL-98A is an interface that enables Video in motion features in Volvo vehicles that are equipped with select Volvo Vehicles with RTI 2011 Navigation System.     General Features: Retains functionality of Factory-installed Navigation System for passenger access at anytime Allows onscreen access to Factory Bluetooth Keypad Allows for Navigation Destination Address Entry at anytime Designed for OEM equipment only *Subject to capability of Factory-installed Navigation System. Note: *Interface does not have a video input Vehicle Compatibility Volvo 2011-2013 S Series 2011-2013 V Series 2011-2013 XC60 2011-2013 XC70 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-CVN1 Multi View Integration Interface with A/V Input for Dodge Caravan with MyGig Radio The CRUX RFM-CVN1 is a Multi-Video integration Solution with A/V Input for Select Dodge Caravan Vehicle with MyGig” Systems It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input General Features: – Adds a reverse camera input, 6 video plus 1 audio/video inputs.– Uses the steering wheel controls buttons to toggle between the sources.– Includes side mirror mounted camera pods with adjustable angle cameras.– Turn signals automatically triggers the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button.– Forced view function on cameras (except side cameras).– Ability to toggle from back-up camera to cargo camera and trailer camera while in reverse gear.NOTES:Compatible with MyGig Radio Systems Compatibility: DODGE2018 – Up CaravanNAVIGATION / RADIO COMPATIBILITYWith MyGig Radio SystemsMust have panel opening under side mirror to use the CSV-CVN camera   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux VIMVW-92 VIM Activation for Volkswagen Vehicles w/ RNS-510 Navigation Systems The CRUX VIMVW-92 is an interface that enables Video in-motion features in select Volkswagen vehicles that are equipped with MFD3 / RNS-510 Navigation Systems. Allows fixed menus & aftermarket safety devices to function with the factory-installed navigation system (e.g. safety vision rear-view cameras*).     General Features: Retains functionality of Factory-installed Navigation System for passenger access at anytime Allows for activation of video signal from aftermarket front or rear-view camera* ONLY – FOR FACTORY RADIOS THAT HAVE A VIDEO PORT Designed for OEM equipment only Plug & Play Installation Note: *Interface does not have a video input VEHICLE COMPATIBILITY VOLKSWAGEN 2007 – 2012 Eos 2007 – 2013 Golf 2007 – 2013 Passat 2009 – 2013 Tiguan 2008 – 2010 Touareg BENTLEY 2005 – 2010 Continental GT ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-APV Multi View Integration Interface for Select Volkswagen Vehicles The Crux RFM-APV is a Multi View Integration Interface with 4 camera video inputs. The system seamlessly integrates with the factory installed system for adding Front, Rear, & 2 Side cameras. Uses the steering wheel control buttons or radio buttons to toggle between the inputs. General Features: – Adds reverse camera, front camera and 2 side camera inputs.– Uses the steering wheel control buttons or radio buttons to toggle between the inputs.– Turn signals automatically trigger the corresponding side camera.– Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics.– Interactive parking guide lines with calibration function.– Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines– Built-in on-screen display and setup.– 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear) Compatibility: 2015 – Up2015 – Up Golf 7 Passat (B8) Radio CompatibilityMIB/MIB2 – Discovery Pro 8” and Composition Media 6.5” monitorNOTE:Requires a multimedia player, which is located in the glove box. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-APV Multi View Integration Interface for Select Porsche Vehicles The Crux RFM-APV is a Multi View Integration Interface with 4 camera video inputs. The system seamlessly integrates with the factory installed system for adding Front, Rear, & 2 Side cameras. Uses the steering wheel control buttons or radio buttons to toggle between the inputs. General Features: Adds reverse camera, front camera and 2 side camera inputs.– Uses the steering wheel control buttons or radio buttons to toggle between the inputs.– Turn signals automatically trigger the corresponding side camera.– Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics.– Interactive parking guide lines with calibration function.– Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines– Built-in on-screen display and setup.– 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear) Compatibility: 2017 – Up2017 – Up2017 – Up2017 – Up Boxster Cayenne Cayman 911 PCM 4.0 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-MB2 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System RFM-MB2  Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System ( NON-Navigation System). It integrates with the factory-installed system for adding Front, Rear, and left and right cameras. This unit uses the steering wheel control buttons to toggle between video sources. General Features: Adds front, right, left and rear camera inputs.– Uses the steering wheel control buttons to toggle between the camera sources.– Turn signals automatically trigger the corresponding side camera.– With OEM type interactive parking guide lines with calibration function.– On Screen Display set up.Notes:7” MBUX Systems without Navigation. Compatibility: 2019 – 2020 Sprinter with MBUX SystemNAVIGATION / RADIO COMPATIBILITY7” MBUX Systems without Navigation ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-MB1 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System RFM-MB1 is a Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System. It integrates with the factory-installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit uses steering wheel control buttons to toggle between video sources General Features: – Adds front, right, left and rear camera inputs.– Uses the steering wheel control buttons to toggle between the camera sources.– Turn signals automatically trigger the corresponding side camera.– With OEM type interactive parking guide lines with calibration function.– On Screen Display set up.Notes:Compatible with 7” or 10.25” MBUX Systems with Navigation. Compatibility: 2019 – 2020 Sprinter with MBUX SystemNAVIGATION / RADIO COMPATIBILITY7” or 10.25” MBUX Systems with Navigation. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·