00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Autotek
AUTOTEK MM-1525.5D 1500 Watt Compact 5 Channel Amplifier
$299.99
$599.98
AUTOTEK MM-1525.5D 1500 Watt Compact 5-Channel Amplifier
General Features:
1,500-Watt Max Power
1 Channel X 800 Watts Sub Only At 1 Ohm
4 Channels X 150 Watts + 1 Channel X 400 Watts At 2 Ohms
4 Channels X 150 Watts + 1 Channel X 200 Watts At 4 Ohms
Aftermarket Class D Amp Replaces Or Supplements Vehicle’S Existing Oem Amp To Power Car’S Stereo Speakers
Can Run In 4-Channel Or Mono Mode
Drives Additional Power With A Small Footprint
Frequency Response: 10 Hz To 22 kHz
Total Harmonic Distortion (Thd) Less Than 0.1%
Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High-Speed Mosfets Bring Extreme Power With High Sound Quality And Minimum Distortion Levels
Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display And Showcase For Every Car Audio Installation
Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure Connection While Resisting Corrosion
Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And Secure Connections
Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low Voltage Circuit Which Delivers Minimal Distortion Through Amplification Process
RCA Preamp Audio Outputs And Speaker Level Audio Inputs
RCA Inputs And Outputs Provide the Highest Sound Quality Connection
Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The "Output" Rca Connections, Which Minimize The Need For Additional Cables Running The Length Of The Vehicle, Minimizing Noise
Onboard Variable Electronic Crossover 12 Db Per Octave
Built-In Bass Control
Amp Variable Low Pass: 40 Hz To 300 Hz
Amp Bass Boost 0 Db To 12 Db
Amp Subsonic Filter 10 Hz To 40 Hz
High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal Impact On Electrical System
Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp End Panel
Power Terminal 12-Volt/Gnd: 4 Awg
Speaker Terminal Wire Gauge: 12 AWG
Amp Fusing: External 100 Amps
Dimensions: 18 In. X 7 In. X 3.25 In.
Includes Wired Bass Remote, Mounting Hardware, and Manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega Mobile
Cerwin Vega CVP2500.5D 2500W 5-Channel Car Audio Amplifier + 5 Channels Amp Kit
$229.99
$459.99
Cerwin Vega CVP2500.5D 5-Channel 2500 Watts Bridgeable Class-D Amplifier + 5 Channels 4 Gauge Amp Kit
The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those who are budget-conscious. And with this 2,500-watt Max 5 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and follows standards and practices set forth by CTA (Consumer Technology Association).
General Features:
CVP Series 5-Channel Amplifier
Class-D Full-Range Monoblock Amplifier
150 watts x 4 channel + 500 Watts @ 2 Ohms RMS Power
100 watts x 4 channel + 350 Watts @ 4 Ohms RMS Power
300 watts x 2 channel + 500 Watts @ 4 Ohms RMS Power Bridged
Class-D Circuitry
2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Variable 12dB High, Low, & Subsonic Crossovers
Dimensions: 14.97"W x 9.38"L x 2.25"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
ALPINE S-A55V 440w RMS 5-Channel S-Series Car Audio Amplifier Class D + Absolute 4 Gauge Amp Kit
$439.99
$650.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS +Absolute 4 Gauge Amp Kit
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off!
Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of 4 AWG high current power cable
3 ft. of 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
ALPINE S-A55V 440w RMS 5-Channel S-Series Car Audio Amplifier Class D+Amp Kit
$429.95
$700.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS +Absolute 4 Gauge Amp Kit
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off!
Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of 4 AWG high current power cable
3 ft. of 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate T1000X5ad Power 1,000 Watt Class-ad 5-Channel Amplifier
$849.99
$1,699.98
Rockford Fosgate T1000X5ad Power 1,000 Watt Class-ad 5-Channel Amplifier
The T1000X5ad Element Ready multi-channel amplifier is a 1000 watt RMS unit built on our proprietary Class ad platform designed to deliver unprecidented sound quality with superior power efficiency. Combined with our Constant Power technology, this amplifier can easily exceed its rated power by up to 25% additional output per channel.
General Features
Our compact (1.6” x 4.3” x 12.0”) Power T1000X5ad all in one 5-channel amplifier requires minimal space but delivers a massive 1000 Watts of POWER
Our proprietary "Constant Power" amplifiers are the most powerful amplifiers on the market and deliver up to 25% more power (Watts) across all impedance loads (RMS Power Output: 100 Watts x 4 @ 4-Ohm + 400 x 1 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm + 600 x 1 @ 2-Ohm or N/A + 600 Watts x 1 @ 1-Ohm 200 Watts x 2 @ 4-Ohms Bridged + N/A)
Built on Rockford Fosgate’s proprietary Class-AD technology + Class BD (Sub), featuring Constant Power to produce the same output at both 4-Ohm and 2-Ohm impedances, making it perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs
High-level auto turn-on, CLEAN circuit input/output clip detection, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make T1000X5ad an impressive POWER house
Famous Rockford Fosgate build quality insures that the T1000X5ad will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4ohms
$629.99
$849.99
Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits.
General Features:
5-channel car amplifier
75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm
CEA-2006 compliant
variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
L.E.A.N. gain setup system includes test tone CD
test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
Class-BD amplifier design
frequency response: 20-20K Hz
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter)
signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead
optional PLC2 wired remote level control with clip light available
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended.
15-1/8"W x 2-7/16"H x 8-13/16"D
What is in the box:
5-Channel amplifier
Four 1-1/2" Self-tapping screws
5mm Allen wrench
Quick setup instructions
Certificate of Performance
Setup/Manual disc
Rockford Fosgate Punch P1000X5 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Punch P1000X5
1000W RMS Punch Series 5-Channel Stereo Full-Range Class BD Car Amplifier w/ Dedicated Sub Channel $629.99 $849.99
1000W RMS Punch Series 5-Channel Stereo Full-Range Class BD Car Amplifier w/ Dedicated Sub Channel $629.99 $849.99
Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits.
General Features:
5-channel car amplifier
75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm
CEA-2006 compliant
variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
L.E.A.N. gain setup system includes test tone CD
test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
Class-BD amplifier design
frequency response: 20-20K Hz
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter)
signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead
optional PLC2 wired remote level control with clip light available
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended.
15-1/8"W x 2-7/16"H x 8-13/16"D
What is in the box:
5-Channel amplifier
Four 1-1/2" Self-tapping screws
5mm Allen wrench
Quick setup instructions
Certificate of Performance
Setup/Manual disc
Rockford Fosgate Punch P1000X5 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Punch 1000 Watt 5-Channel Car Amplifier - P1000X5
$629.99
$849.99
Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits.
General Features:
5-channel car amplifier
75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm
CEA-2006 compliant
variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
L.E.A.N. gain setup system includes test tone CD
test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
Class-BD amplifier design
frequency response: 20-20K Hz
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter)
signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead
optional PLC2 wired remote level control with clip light available
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended.
15-1/8"W x 2-7/16"H x 8-13/16"D
What is in the box:
5-Channel amplifier
Four 1-1/2" Self-tapping screws
5mm Allen wrench
Quick setup instructions
Certificate of Performance
Setup/Manual disc
Rockford Fosgate Punch P1000X5 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Diamond Audio
Diamond Audio MICRO5V2 950W RMS 5-Channel Compact Car Motorcycle Class D Amplifier
$719.99
$1,439.98
Diamond Audio MICRO5V2 5-Channel 950W RMS Class D Car Motorcycle ATV Audio Amplifier
Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 5-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio!
General Features:
Ultra-compact high-density aluminum alloy chassis provide superior thermal stability.
Four-layer, a glass circuit board for enhanced performance and reliability
Full Range Class D amplifier technology
Bridgeable for high-power operation (CH1+CH2/CH3+CH4)
Balanced differential inputs for superior noise rejection
Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input
Input selector switch (2CH/4CH)
Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC)
Fully variable, 12dB per octave, electronic crossovers
Remote level control for Mono channel (CH5) included
Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller
Illuminated logo
Specifications:
RMS Power Rating:
RMS Power (2Ω): 150W x 4/350W x 1
RMS Power (4Ω): 80W x 4/200W x 1
Bridged (mono 1Ω): N/A
Bridged (mono 2Ω): N/A
Bridged (mono 4Ω): 300W x 2/200W x 1
Topology: Full Range Class D
Power Supply:
Power Supply: Full PWM
Power Supply Threshold: 10.0VDC - 17.0VDC
Idle Current: (0.7A)
Distortion:
THD 4 (1KHx @ 4Ω): 0.5%
S/N Ratio (A weighted @1W): -85dBA
S/N Ratio (A weighted @FP): -101.1dBA
Input Sensitivity:
Low Input Level: 200mV - 10.0V
High Input Level: N/A
Input Impedance:
Low Input Level: 20KΩ
High Input Level: 20KΩ
Output Stage:
Output Impedance: 0.018Ω
Damping Factor (50Hz@4Ω): >70
Bandwidth (-3dB): 10Hz - 35Hz
Crossover (-12dB/Oct):
Variable High-Pass: Flat or Fixed 70Hz
Variable Low-Pass: 40Hz - 400Hz
Variable Sun-Sonic: N/A
Fuse Ratings:
ATC: 60A
Dimensions: 10.65” L x 4.0” W x 1.46” H
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Diamond Audio
Diamond Audio HX1200.5 1400W RMS HEX-Series 5-Channel Class-D Car Amplifier Amp
$1,029.99
$2,059.98
Diamond Audio HX1200.5 1400W RMS HEX-Series 5-Channel Class-D Car Amplifier Amp
For exceptional studio sound quality, the balance of power and control must be mastered in reproducing accurate sound recordings. HEX series amplifiers deliver the most filtered and cleanest signal by removing unwanted static and transient noise that can affect and degrade any car audio system. HEX series amplifiers are manufactured using top-grade audiophile components to deliver unrivaled sound quality amplification. Inspired by the best technologies from professional studio sound equipment, HEX series amplifiers will surely provide the power and control to reproduce that signature Diamond Audio sound!
General Features:
Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance
4-Layer PCB Board with Balanced Differential Inputs
Full-Range Digital Class D IR Chipset
“SNAP” Capacitors used Throughout Circuit
Audiophile Grade High Tolerance Components
Spring Steel FET Clips Provide Cleaner Board Design
Illuminated Logo/Fully Concealed Mounting
Output Clip Indicators for Precise System Set Up
Fine-Tuned Fully Variable Crossover and Phase Control
Top Mounted Controls for Convenient Amplifier
Specifications:
RMS Power Rating:
RMS Power (4Ω): 100 W X 4 / 480 X 1
RMS Power (2Ω): 150 W X 4 / 800 x 1
Bridged(mono 4Ω): 480 W X 1(sub output)
Bridged(mono 2Ω): 800 W X 1(sub output)
Bridged(stereo 4Ω): 300 W X 2(4Ω) / 800 X 1(2Ω)
Topology: Full Range Class D
Power Supply: Full PWM
Power Supply Threshold: 10.0VDC-170VDC
Idle Current: (0.7A)
THD 4(1KH@4Ω) : 0.06%
S/N Ratio(A weighted@1W): -80dBA
S/N Ratio(A weighted@FP): .95dBA
Low Input Level: 200mV-5.0V
Hight Input Level: N/A
Input Impedance:
Low Input Level: 20 KΩ
High Input Level: N/A
Output Impedance: 0.0297 Ω
Damping Factor(50Hz@4Ω): >250
Bandwidth(-3dB): 10Hz-35KHz
Crossover(-12/24dB/Oct)
Variable High-Pass: 40Hz-400Hz(-12dB Ch1/2/3/4)
Variable Low-Pass: 30Hz-300Hz(-12dB Ch 5)
Variable Sub-Sonic: 10-55Hz @ 18 dB
Fuse Ratings: ATC: 40A X 2
Dimensions:
Length x Width x Height(Inches): 14.25" x 7.67" x 2"
Length x Width x Height(mm): 362 x 195 x 51.5
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Power T1000x5ad Compact 5-channel car amplifier 100 watts RMS x 4 at 2 to 4 ohms + 600 watts RMS x 1 at 1 to 2 ohms
$849.99
$1,099.99
Rockford Fosgate Power T1000x5ad Compact 5-channel car amplifier 100 watts RMS x 4 at 2 to 4 ohms + 600 watts RMS x 1 at 1 to 2 ohms
Super-compact, bursting with powerRockford Fosgate's Power Series T1000X5ad 5-channel amplifier can send 100 watts RMS each to four separate speakers while delivering up to 600 watts RMS to a subwoofer. Or you could use this tiny powerpack to run a couple of high-performance components with 200 watts each along with 600 watts RMS for the sub. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long time.
Class AD: accurate and powerfulRockford Fosgate uses their proprietary Class AD amplifier technology, combining the high fidelity of a Class A system with the high efficiency of their special Class D technology, to bring you this ultra-efficient, high-output amplifier. In other words, this compact amp produces more power with less current draw from your vehicle's charging system than most other amps on the road today.Rockford Fosgate's high-tech solutions yield more powerThis Power Series amplifier actively monitors speaker and subwoofer performance, using Rockford Fosgate's Constant Power technology. A speaker's impedance naturally fluctuates as it performs, fighting against your amp's output. So, just like your cruise control increases the engine's RPM to maintain your car's speed uphill, Constant Power maintains this amp's output by increasing its internal voltage and current flow when the speaker's impedance rises. This results in up to a 25% increase in the amp's total power output.
Easy to set for optimum performanceRockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.
Clip lights monitor distortionIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping and restore pristine sound.
Product highlights:
5-channel car amplifier
100 watts RMS x 4 + 400 watts RMS x 1 at 4 ohms
100 watts RMS x 4 + 600 watts RMS x 1 at 2 ohms
200 watts RMS x 2 bridged at 4 ohms + 600 watts RMS at 1 ohm
CEA-2006 compliant
Features:
Class-AD amp technology on front and rear channels; Class BD on sub channel with Constant Power topology
C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones
differential input circuitry helps eliminate hum
dual-fan forced induction cooling
variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
variable low-pass filter (50-250 Hz, 12 dB/octave) on subwoofer channel
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
variable Punch EQ bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) on all channels
optional PLC2 wired remote level control with clip light available
More Info:
preamp and speaker-level inputs
signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
8-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
12-1/2"W x 1-11/16"H x 4-5/16"D
warranty: 2 years (extends to 3 years when purchased with an appropriate Rockford Fosgate amp wiring kit
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
$629.99
$749.99
Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
Big power for your whole systemRockford Fosgate's Punch P1000X5 amplifier can power your entire system, delivering 75 watts RMS to each of your front and rear speakers, along with up to 500 watts RMS to a subwoofer. The sub channel's low-pass and subsonic filters come in handy for getting the right sound from your sub/enclosure combo, and you can use the amp's high-pass filters to remove the bass from your full-range speakers so they'll play more efficiently. The Punch EQ2 includes bass and treble boosts, in case you want to liven up the mix.
Not worried about rear speakers? You can also switch this amp into 3-channel mode to drive a couple of high-performance components with 250 watts RMS each while still powering a sub with up to 500 watts.
Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.
Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything.
Eliminating heat raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.
Product highlights:
5-channel car amplifier
75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm
CEA-2006 compliant
Features:
variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones
Class-BD amplifier design
frequency response: 20-20K Hz
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter)
signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
More Info:
optional PLC2 wired remote level control with clip light available
4-gauge power and ground leads and an 150-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended
15-1/8"W x 2-7/16"H x 8-13/16"D
warranty: 1 year
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Punch P300X1 Mono amplifier 300 watts RMS x 1 at 2 ohms
$249.99
$449.99
Rockford Fosgate Punch P300X1 Mono amplifier 300 watts RMS x 1 at 2 ohms
Big power for your sub or speaker systemRockford Fosgate's Punch P300X1 mono amplifier produces up to 300 watts RMS, giving you plenty of clean power for your rhythm track. With frequency response from 20 to 20,000 Hz, this full-range amp can also power a center channel or component speaker. You can use the low-pass filter to tune the sizzle away from your sub, or the high-pass filter to keep the lows out of a component speaker. The Punch EQ2 gives you a variable bass and treble boost, in case you want to add a little of that boom and sizzle back into the mix.
Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.
Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything.
Maintaining coolness raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.
Product highlights:
full-range mono amplifier
frequency response: 20-20,000 Hz
200 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
CEA-2006 compliant
Features:
variable high- and low-pass filter filter (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones
Class-AB amplifier design
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp inputs and outputs
speaker-level inputs (speaker wire to RCA adapter required)
signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
More Info:
optional PLC2 wired remote level control with clip light available
8-gauge power and ground leads and an 50-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and the amplifier is recommended
9-15/16"W x 2-7/16"H x 7-13/16"D
warranty: 1 year
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Absolute USA
Absolute USA Vicious Series 5VI6000 6000-Watt Maximum Power 1-Channel Amplifier
$399.99
$599.99
Absolute 5VI6000 6000W Max Vicious Series 5-Channel Digital Amplifier
Vicious Series 5-Channel Class A/B Car Amplifier
RMS Power Rating (14.4V):
4 ohms: 60 watts x 4 chan. + 400 watts x 1 chan.
2 ohms: 90 watts x 4 chan. + 700 watts x 1 chan.
Bridged, 4 ohms: 180 watts x 2 chan. + 400 watts x 1 chan.
Level: 200mV-6V
Max power output (15.2V, 15%THD): 6000 watts
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
Soft Start Turn-on
5/4/3 channel operation
Speaker-level (high-level) inputs with signal sensing for automatic turn-on
Preamp RCA outputs to daisy chain multiple amps
System Protection circuitry
Illuminated Absolute badge
Heavy-duty aluminum alloy heatsinks for extreme heat dissipation
Silver-plated RCA level inputs
Silver-plated screw terminals
Input sensitivity:
Variable high-pass filter (50-1,000 Hz, 12 dB/octave)
Variable low-pass filter (35-500 Hz, 24 dB/octave)
Phase Shift: 0-180°
Damping factor: >150
Frequency response: 10-30,000 Hz
Dimensions: 19-7/16"L x 10-1/2"W x 2-1/2"H
4-gauge power and ground wiring are required for installation.
Authorized Internet Dealer
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.