

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ HD500 500W PRO PA DJ High-Frequency Compressor Horn Driver Tweeter
$44.99
$99.99
MR DJ USA HD-500 500W Professional Grade PRO PA DJ High-Frequency Titanium Compression Horn Driver Tweeter
The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm with unique stiffness and damping properties. The voice coil, increased power handling, and controlled low-frequency behavior are assured by fluid cooling. Mr DJ HD-500 500 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for any other brands like JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands
General Features:
Replacement High-Quality Compression Horn Driver
High-Efficiency Ceramic Tweeter
Frequency response: 1300Hz -19000Hz
Fits horns with 13/8” X 18 TPI threads
For use with 4~16 Ohm applications
Max Power Handling: 500W P.M.P.O
RMS Power Handling: 30Watts
Size 3.20" Round x 2.39 Deep" Threaded Mounting Shaft
High Impact ABS Black Housing
Midrange/tweeter compression horn driver
Titanium diaphragm
Terminals 205 Type
Sensitivity 102 dB
Fits Horns with 1-3/8" x 18 TPI Threads
Frequency Range:1500Hz-20kHz
Type: 25mm Titanium Compression Tweeter Driver
2501: Nominal impedance: 8ohm(AC)
power capacity:25W
sensitivity:105db/m.w
diaphragm material: Titanium
voice coil: Kapton25.4-CCAW
magnet: 11oz Ferrite
Horn Coupling:1 3/8” 18TPI
Power Handling: 500 Watt Each P.M.P.O
Voice Coil Diameter: 25mm
Weight: 1.5Lbs Each
Diaphragm: Titanium
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey RX14 Professional 1.4" High Frequency Horn Drivers
$79.99
$259.99
Peavey RX14 Professional 1.4" Professional High-Frequency Horn Drivers
Features:
Peavey RX14 1.4" High Frequency Drivers. Throat Parameter: .938" / 23.8 mm. Nominal Impedance: 8 Ohms. Minimum Impedance: 7.1 Ohms. DC Resistance: 6.8 Ohms
Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous. Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90 H x 45 V horn
Nominal Efficiency: 30%. Frequency Response: 1.5 kHz to 20 kHz. Recommended Crossover: 1,800 Hz at 12 dB / Octave. Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave
Diaphragm: Commercially pure titanium. Voice Coil Diameter: 1.4" / 34.4 mm. Voice Coil Material: Edge-wound ribbon with high-temperature Kapton bobbin. Flux Density: 11,500 gauss (1.15T)
Dimensions: 3.54" (90 mm) diameter 2.40" (61 mm) depth. Horn Coupling Diameter: .938" (23.8 mm). Horn Coupling Threads: Standard 1 3/8" / 18". Net Weight: 33.6 oz.
Details: Save with this bundle: Peavey 03495480 RX14 - 1 High-Frequency Compression Driver (Set of 2). The RX14 1" compression driver is known for excellent performance, reliability, and power handling. The voice coil is a copper-clad aluminum wire wound on a Kapton high-temperature coil former. The one-piece titanium diaphragm reduces the amount of moving mass, extending the driver's high-frequency response. Ferrofluid cooling improves reliability and smooths the frequency response.
Package Dimensions: 4.2 x 4.2 x 3.2 inches
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 MR DJ3.1" Super Round Piezo Bullet Compressor Tweeter TWR400 400 Watts Black
$29.99
$59.99
2 Mr. Dj TWR400 400W Max, TW Series 3.1" Super Round Piezo Bullet Compressor Tweeter
This MR DJ 4-8ohm piezo horn tweeter has a max wattage of 400 watts and is designed and engineered in the USA. This tweeter has exactly matching specifications as Motorola's KSN1056A tweeter and is the perfect replacement. These are popular tweeters often used in pro, car, and home audio speaker applications. Because of its piezo design, it provides crisp highs and does not require a crossover. Also, it works great as an add-on to any existing audio system to make it sound cleaner and brighter. These are also replacements for home cabinets, and they work great in-car speaker boxes.
General Features:
TW Series Super Piezo Bullet Tweeter
Power Handling:
Peak: 400 watts
RMS: 150 watts
90 Degree sound dispersion
Designed for use with a bi-polar electric capacitor
4-8 ohms impedance
Frequency Response: 5,000-20,000 Hz
Sensitivity: 108 dB
Top-mount depth: 2"
Authorized Internet Dealer
1-year Manufacturer's warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Mr. Dj TWR400 400W Max, TW Series 3.1" Super Round Piezo Bullet Compressor Tweeter
$29.99
$59.99
2 Mr. Dj TWR400 400W Max, TW Series 3.1" Super Round Piezo Bullet Compressor Tweeter
This MR DJ 4-8ohm piezo horn tweeter has a max wattage of 400 watts and is designed and engineered in the USA. This tweeter has exactly matching specifications as Motorola's KSN1056A tweeter and is the perfect replacement. These are popular tweeters often used in pro, car, and home audio speaker applications. Because of its piezo design, it provides crisp highs and does not require a crossover. Also, it works great as an add-on to any existing audio system to make it sound cleaner and brighter. These are also replacements for home cabinets, and they work great in-car speaker boxes.
General Features:
TW Series Super Piezo Bullet Tweeter
Power Handling:
Peak: 400 watts
RMS: 150 watts
90 Degree sound dispersion
Designed for use with a bi-polar electric capacitor
4-8 ohms impedance
Frequency Response: 5,000-20,000 Hz
Sensitivity: 108 dB
Top-mount depth: 2"
Authorized Internet Dealer
1-year Manufacturer's warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey 14XT DRIVER, 14XT Driver Diaphragm
$89.99
$130.31
Peavey 14XT DRIVER, 14XT Driver Diaphragm
The Peavey 14XT DRIVER is a 14XT Driver Diaphragm. 14XT compression driver 8 Ohm. Titanium diaphragm compression driver with 1" Throat diameter. Frequency response 1kHz - 18kHz, Impedance 8 ohms.
Product Specifications:
Throat Parameter: 1" / 25 mm
Nominal Impedance: 8 Ohms
Minimum Impedance: 7.1 Ohms
DC Resistance: 6.8 Ohms
Diaphragm: Commercially pure titanium
Voice Coil Diameter: 1.4" / 35.5 mm
Voice Coil Material: Edge-wound ribbon with high temp Kapton bobbin
Flux Density: 11,500 gausses (1.15T)
Product Weight: 2.05 lbs
Box Dimensions (L x W x H): 3.25 x 3.75 x 3.75 inches
Box Weight: 2.16 lbs
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Mackie SRM450 Diaphragm 1.75" Tweeter Horn Driver
$49.98
$99.99
2 Replacement Fit for Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
44.5mm ( 1.75” ) titanium diaphragm Compression Speaker horn Driver Tweeter voice coil Round copper wire Speaker Parts
General Features:
Coil diameter: 44.5mm, 1.75”
Column center distance: 90mm, 3.54”
Aluminum outer diameter: 71mm, 2.79”
Dome height: 6.8mm, 0.267”
Sound film material: titanium film
Coil material: round copper wire
Nominal Impedance: 8 Ohm
Power (RMS): 100W
Power (MAX): 800W
Sensitivity(1W/1m): 110dB
Frequency Range: 600Hz - 20KHz
Diaphragm Material: Titanium
Easy to install, self-centering
Mackie: 1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225, and many more!Note: It does NOT fit older style Mackie SRM450 with the M44Ti horn driver!
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mackie SRM450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
$24.99
$49.99
Replacement Fit for Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part
44.5mm ( 1.75” ) titanium diaphragm Compression Speaker horn Driver Tweeter voice coil Round copper wire Speaker Parts
General Features:
Coil diameter: 44.5mm, 1.75”
Column center distance: 90mm, 3.54”
Aluminum outer diameter: 71mm, 2.79”
Dome height: 6.8mm, 0.267”
Sound film material: titanium film
Coil material: round copper wire
Nominal Impedance: 8 Ohms
Power (RMS): 100W
Power (MAX): 800W
Sensitivity(1W/1m): 110dB
Frequency Range: 600Hz - 20KHz
Diaphragm Material: Titanium
Easy to install, self-centering
Mackie: 1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225, and many more!Note: It does NOT fit older style Mackie SRM450 with the M44Ti horn driver!
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn
$99.99
$199.99
MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn
MR DJ PRO-D1 Pro Audio Compression Driver for mid-high vocal reproduction offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install without detaching the driver from the horn. MR DJ PRO Titanium Compression Drivers with Aluminum Horns are the top-of-the-line high-frequency drivers/tweeter/horns in the market. Capable of emitting deafening high-frequency sound, this high-compression driver will turn heads and demand attention. It is guaranteed to elevate any pro audio build to the next level.
General Features:
Pro Audio Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm.
The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn.
Impressive 110 dB sensitivity
with PRO Audio long Horn Designed for maximum sound reproduction
Peak Power Handling 1000 Watts
Program Power Handling 600 Watts
AES Rated Power 400 Watts
Diaphragm Titanium Material, Horn Titanium Material,
Mr. Dj PRO-D1 1000 Watts Titanium Compression Driver
RMS Power 600 Watts,
Voice Coil 2.03", Impedance 8 Ohm,
Diaphragm Titanium Material,
Horn Titanium Material,
Throat Diameter 2",
35 Oz Magnet,
Frequency Response 900Hz - 17.2KHz,
Newly redesigned backplate for an amazing look.
The high-wattage driver requires 220w AES power and 600w max for ear-blasting high-range frequencies.
900Hz-17.2KHz Frequency Response
Mylar Capacitor Crossover
2 inch Driver Horn
108dB Sensitivity
8-Ohms Impedance
Baffle Cut Out: 5.39"
Overall Diameter: 6.18"
Mounting Depth: 7.67"
Weight: 6 Lbs.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 MR DJ PRO-D1 High Compression Titanium Driver Bullet Tweeter Aluminum Horn
$189.99
$399.99
2 MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn
MR DJ PRO-D1 Pro Audio Compression Driver for mid-high vocal reproduction offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. MR DJ PRO Titanium Compression Drivers with Aluminum Horns are the top-of-the-line high-frequency drivers/tweeter/horns in the market. Capable of emitting deafening high-frequency sound, this high-compression driver will turn heads and demand attention. It is guaranteed to elevate any pro audio build to the next level.
General Features:
Pro Audio Compression Driver for mid-high vocal reproduction, with high sensitivity and a pleasant sound from the titanium diaphragm.
The driver's small diameter allows front mounting, making it easy to install without detaching the driver from the horn.
Impressive 110 dB sensitivity
with PRO Audio long Horn Designed for maximum sound reproduction
Peak Power Handling 1000 Watts
Program Power Handling 600 Watts
AES Rated Power 400 Watts
Diaphragm Titanium Material, Horn Titanium Material,
Mr. Dj PRO-D1 1000 Watts Titanium Compression Driver
RMS Power 600 Watts,
Voice Coil 2.03", Impedance 8 Ohm,
Diaphragm Titanium Material,
Horn Titanium Material,
Throat Diameter 2",
35 Oz Magnet,
Frequency Response 900Hz - 17.2KHz,
Newly redesigned backplate for an amazing look.
High wattage driver requiring 220w AES power and 600w max for ear-blasting high-range frequencies.
900Hz-17.2KHz Frequency Response
Mylar Capacitor Crossover
2-inch Driver Horn
108dB Sensitivity
8-Ohms Impedance
Baffle Cut Out: 5.39"
Overall Diameter: 6.18"
Mounting Depth: 7.67"
Weight: 6 Lbs.
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ HD700 700W PRO PA DJ High-Frequency Titanium Compression Horn Driver Tweeter
$54.99
$109.99
MR DJ USA HD-700 700W Professional Grade PRO PA DJ High-Frequency Titanium Compression Horn Driver Tweeter
The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm with unique stiffness and damping properties. The voice coil, increased power handling, and controlled low-frequency behavior are assured by fluid cooling. Mr DJ HD-700 700 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for any other brands like JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands
General Features:
Professional Replacement Heavy-Duty Titanium Compression Driver
High-Efficiency Ceramic Tweeter
Frequency response: 1200Hz -20000Hz
Fits horns with 1 3/8” X 18 TPI threads
For use with 4~16 Ohm applications
Max Power Handling: 700W PMPO
RMS Power Handling: 40 Watts
Size 3.55" Round Mounting Shaft
High Impact ABS Black Housing
Midrange/tweeter compression horn driver
Titanium diaphragm
Terminals 205 Type
Sensitivity 104 dB
Fits Horns with 1-3/8" x 18 TPI Threads
Type: 1.33" 34mm Titanium Compression Tweeter Driver
Nominal impedance: 8ohm(AC)
power capacity: 40W
sensitivity:110db/m.w
diaphragm material: Titanium
voice coil: Kapton 1.33" 34mm-CCAW
magnet: 15oz Ferrite
Horn Coupling:1 3/8” 18TPI
Power Handling: 700 Watt Each P.M.P.O
Voice Coil Diameter: 1.33" 34mm
Weight: 2 Lbs Each
Diaphragm: Titanium
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ HD900 5.3" 900W PRO PA DJ High-Frequency Titanium Compression Horn Driver Tweeter
$69.99
$139.99
MR DJ USA HD-900 5.30" 900W Professional Grade PRO PA DJ High-Frequency Titanium Compression Horn Driver Tweeter
The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm with unique stiffness and damping properties. The voice coil, increased power handling, and controlled low-frequency behavior are assured by fluid cooling. Mr DJ HD-900 900 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for any other brands like JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands
General Features:
Professional Replacement Heavy-Duty Titanium Compression Driver
High-Efficiency Ceramic Tweeter
Frequency response: 1000Hz -20000Hz
Fits horns with 1 3/8” X 18 TPI threads
For use with 4~16 Ohm applications
Max Power Handling: 900W PMPO
RMS Power Handling: 60 Watts
Size 5.30" Round x 3.39" Deep Threaded Mounting Shaft
High Impact ABS Black Housing
Midrange/tweeter compression horn driver
Titanium diaphragm
Terminals 205 Type
Sensitivity 102 dB
Fits Horns with 1-3/8" x 18 TPI Threads
Type: 2" 51mm Titanium Compression Tweeter Driver
Nominal impedance: 8ohm(AC)
power capacity: 60W
sensitivity:110db/m.w
diaphragm material: Titanium
voice coil: Kapton 2" 51mm-CCAW
magnet: 30oz Ferrite
Horn Coupling:1 3/8” 18TPI
Power Handling: 900 Watt Each P.M.P.O
Voice Coil Diameter: 2" 51mm
Weight: 5.18 Lbs Each
Diaphragm: Titanium
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ HD600 3.18" 600W PRO Heavy Duty Titanium Compression Driver
$49.99
$99.99
MR DJ USA HD-600 3.18" Compression Horn Driver Professional Grade 600 Watts PMPO High-Frequency PA DJ Horn Driver Tweeter
The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm with unique stiffness and damping properties. The voice coil, increased power handling, and controlled low-frequency behavior are assured by fluid cooling. Mr DJ HD-600 600 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for any other brands like JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands
General Features:
Replacement High-Quality Compression Horn Driver
High-Efficiency Ceramic Tweeter
Frequency response: 1300Hz -19000Hz
Fits horns with 13/8” X 18 TPI threads
For use with 4~16 Ohm applications
Max Power Handling: 600W
Size 3.20" Round x 2.39 Deep" Threaded Mounting Shaft
High Impact ABS Black Housing
Midrange/tweeter compression horn driver
Titanium diaphragm
Terminals 205 Type
Sensitivity 102 dB
Fits Horns with 1-3/8" x 18 TPI Threads
Frequency Range:1200Hz-19kHz
Type: 25mm Titanium Compression Tweeter Driver
2501: Nominal impedance: 8ohm(AC)
power capacity:30W
sensitivity:105db/m.w
diaphragm material: Titanium
voice coil: Kapton 25.4-CCAW
magnet: 11oz Ferrite
Horn Coupling:1 3/8” 18TPI
Power Handling: 500 Watt Each P.M.P.O
Voice Coil Diameter: 25mm
Weight: 1.5Lbs Each
Diaphragm: Titanium
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.