PRO Tweeters, Drivers & Horns (143)

MR DJ USA TE180 4"x10" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for a PA DJ Cabinet or Building Your PA DJ Speakers—a Very Efficient and Powerful Compression Tweeter. General Features: 4"x10" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT1000S 4-inch Chrome High Compression Titanium Bullet Super Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000S 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1000W (Per Tweeter) @ 4-Ohm RMS Power Handling: 200W (Per Tweeter) @ 4-Ohm Impedance 4/8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT1000B 4-inch Black High Compression Titanium Bullet Super Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000B 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1000W (Per Tweeter) @ 4-Ohm RMS Power Handling: 200W (Per Tweeter) @ 4-Ohm Impedance 4/8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT700B 3.5-inch 500W Black High Compression Titanium Bullet Super Tweeter with 10 Ounce Ferrite Magnet for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides, allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT700S 3.5-inch 500W Black High Compression Titanium Bullet Super Tweeter with 10 Ounce Ferrite Magnet for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides, allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HD-500 500W Professional Grade PRO PA DJ High-Frequency Titanium Compression Horn Driver Tweeter  The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm with unique stiffness and damping properties. The voice coil, increased power handling, and controlled low-frequency behavior are assured by fluid cooling. Mr DJ HD-500 500 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for any other brands like JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands General Features: Replacement High-Quality Compression Horn Driver High-Efficiency Ceramic Tweeter Frequency response: 1300Hz -19000Hz Fits horns with 13/8” X 18 TPI threads For use with 4~16 Ohm applications Max Power Handling: 500W P.M.P.O RMS Power Handling: 30Watts Size 3.20" Round x 2.39 Deep" Threaded Mounting Shaft High Impact ABS Black Housing Midrange/tweeter compression horn driver Titanium diaphragm Terminals 205 Type Sensitivity 102 dB Fits Horns with 1-3/8" x 18 TPI Threads Frequency Range:1500Hz-20kHz Type: 25mm Titanium Compression Tweeter Driver 2501: Nominal impedance: 8ohm(AC) power capacity:25W sensitivity:105db/m.w diaphragm material: Titanium voice coil: Kapton25.4-CCAW magnet: 11oz Ferrite Horn Coupling:1 3/8” 18TPI Power Handling: 500 Watt Each P.M.P.O Voice Coil Diameter: 25mm Weight: 1.5Lbs Each Diaphragm: Titanium Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Peavey RX14 Professional 1.4" Professional High-Frequency Horn Drivers Features: Peavey RX14 1.4" High Frequency Drivers. Throat Parameter: .938" / 23.8 mm. Nominal Impedance: 8 Ohms. Minimum Impedance: 7.1 Ohms. DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous. Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90 H x 45 V horn Nominal Efficiency: 30%. Frequency Response: 1.5 kHz to 20 kHz. Recommended Crossover: 1,800 Hz at 12 dB / Octave. Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium. Voice Coil Diameter: 1.4" / 34.4 mm. Voice Coil Material: Edge-wound ribbon with high-temperature Kapton bobbin. Flux Density: 11,500 gauss (1.15T) Dimensions: 3.54" (90 mm) diameter 2.40" (61 mm) depth. Horn Coupling Diameter: .938" (23.8 mm). Horn Coupling Threads: Standard 1 3/8" / 18". Net Weight: 33.6 oz. Details: Save with this bundle: Peavey 03495480 RX14 - 1 High-Frequency Compression Driver (Set of 2). The RX14 1" compression driver is known for excellent performance, reliability, and power handling. The voice coil is a copper-clad aluminum wire wound on a Kapton high-temperature coil former. The one-piece titanium diaphragm reduces the amount of moving mass, extending the driver's high-frequency response. Ferrofluid cooling improves reliability and smooths the frequency response.  Package Dimensions: 4.2 x 4.2 x 3.2 inches Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Replacement Fit for Mackie SRM450 SRM-450 Diaphragm 1701 Tweeter Horn Driver MR DJ Part 44.5mm ( 1.75” ) titanium diaphragm Compression Speaker horn Driver Tweeter voice coil Round copper wire Speaker Parts General Features: Coil diameter: 44.5mm, 1.75” Column center distance: 90mm, 3.54” Aluminum outer diameter: 71mm, 2.79” Dome height: 6.8mm, 0.267” Sound film material: titanium film Coil material: round copper wire Nominal Impedance: 8 Ohm Power (RMS): 100W Power (MAX): 800W Sensitivity(1W/1m): 110dB Frequency Range: 600Hz - 20KHz Diaphragm Material: Titanium Easy to install, self-centering Mackie: 1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225, and many more!Note: It does NOT fit older style Mackie SRM450 with the M44Ti horn driver! Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.