Rockford Fosgate
2 Rockford Fosgate Punch P1S4-12 12" 1000W 4-Ohm Power Car Audio Subwoofers Subs
$219.98
$320.00
2 Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers
Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
General Features:
12" Single 4 ohm Punch Stage 1 Subwoofer
Power Handling: Peak: 500 watts
Power Handling: RMS: 250 watts
Recommended power range: 125 - 300 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12
Mounting Depth: 6"
Cutout Diameter: 11.22"
Magnet Weight: 45 oz
Frequency Response: 20 - 250 Hz
Xmax: 9mm
Sensitivity: 86 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.79ft³
Recommended Sealed Enclosure: 1.02ft³
Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the P1S4-12 package:
Punch P1S4-12 owner's manual
12" SVC 4-ohm subwoofer
Trim ring
Eight 1-1/8" Allen head screws
4mm Allen head bit
Installation/Operation manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
Rockford Fosgate
Rockford Fosgate Punch P1S4-12 500W Max 12" Punch P1 Series Single 4-Ohm Car Subwoofer
$109.99
$160.00
Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers
Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
General Features:
12" Single 4 ohm Punch Stage 1 Subwoofer
Power Handling: Peak: 500 watts
Power Handling: RMS: 250 watts
Recommended power range: 125 - 300 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12
Mounting Depth: 6"
Cutout Diameter: 11.22"
Magnet Weight: 45 oz
Frequency Response: 20 - 250 Hz
Xmax: 9mm
Sensitivity: 86 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.79ft³
Recommended Sealed Enclosure: 1.02ft³
Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the P1S4-12 package:
Punch P1S4-12 owner's manual
12" SVC 4-ohm subwoofer
Trim ring
Eight 1-1/8" Allen head screws
4mm Allen head bit
Installation/Operation manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
Rockford Fosgate
Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Car Audio Subwoofer
$109.99
$160.00
Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofer
Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
General Features:
12" Single 4 ohm Punch Stage 1 Subwoofer
Power Handling: Peak: 500 watts
Power Handling: RMS: 250 watts
Recommended power range: 125 - 300 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12
Mounting Depth: 6"
Cutout Diameter: 11.22"
Magnet Weight: 45 oz
Frequency Response: 20 - 250 Hz
Xmax: 9mm
Sensitivity: 86 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.79ft³
Recommended Sealed Enclosure: 1.02ft³
Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the box:
12" SVC 4-ohm subwoofer
Trim ring
Eight 1-1/8" Allen head screws
4mm Allen head bit
Installation/Operation manual (English/ French/ Spanish/ German)
Rockford Fosgate Punch P1S4-12 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
Rockford Fosgate
Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers Subs
$109.99
$160.00
Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers
Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
General Features:
12" Single 4 ohm Punch Stage 1 Subwoofer
Power Handling: Peak: 500 watts
Power Handling: RMS: 250 watts
Recommended power range: 125 - 300 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12
Mounting Depth: 6"
Cutout Diameter: 11.22"
Magnet Weight: 45 oz
Frequency Response: 20 - 250 Hz
Xmax: 9mm
Sensitivity: 86 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.79ft³
Recommended Sealed Enclosure: 1.02ft³
Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms
Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms
Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the P1S4-12 package:
Punch P1S4-12 owner's manual
12" SVC 4-ohm subwoofer
Trim ring
Eight 1-1/8" Allen head screws
4mm Allen head bit
Installation/Operation manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
Alpine
2 Alpine SWT-10S4 Car Subwoofer
$439.90
$999.99
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms.
General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
2 New Alpine SWT-10S4 10" 2000w Shallow Subwoofers Car Stereo Subs
$439.90
$800.00
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine SWT-10S4 10" Subwoofer Bundle
$439.90
$999.99
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine SWT-10S2 10" Subwoofer Bundle
$439.90
$999.99
2 Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features:
10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S2 package:
SWT-10S2 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
2 New Alpine SWT-10S4 10" 2000W Shallow Subwoofers Car Stereo Subs
$439.90
$800.00
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
Peak Power Handling: 1,000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
8AWG Push Terminals
Top-mount depth: 4-3/16"
Mounting Diameter: 8-15/16''
Frequency Response: 30 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
SWT-10S4 owner's manual
10" Thin-mount subwoofer
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
2 Alpine R2-W12D2 Car Audio Dual 2 Ohm 12" Subwoofers with Sub Install Kit Package
$721.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine Type R2-W12D2 12 Inch 2250 Watt Max 2 Ohm Round Car Audio Subwoofer 2 Pack
$721.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine Two R2-W12D2 12-Inch Dual 2 Ohm Subwoofers Bundle
$721.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine Two R2-W12D2 R-Series 12-Inch Dual 2 Ohm Subwoofers Bundle
$721.90
$899.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine R2-W12D2 Car Audio Type R Dual 2 Ohm 1500 Watt 12" Subwoofers with Sub Install Kit Package
$721.90
$999.99
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Alpine
Alpine PWE-S8-WRA Compact powered subwoofer 8" Amplified Custom Fit for 2011-up Jeep Wrangler 4 door
$549.95
$850.00
Alpine PWE-S8-WRA 8" Amplified Custom Fit for 2011-up Jeep Wrangler (4 doors) - Under Seat Plug and Play 120 Watt Amplified Subwoofer
DISCREET, WITH A PUNCH
The small but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watts amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space.
SOUND CONTROL AT YOUR FINGERTIPS
Subwoofer controls like Phase, Gain, LP Crossover, and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to make bass level adjustments easily.General Features:
8-inch Compact Powered Subwoofer System
Compatible with 2011-Up Jeep Wrangler 4-door vehicles
Plug-and-play installation
Installs under the driver's seat
Works with an Alpine or aftermarket head unit or with the factory Jeep radio
Built-in 120 Watt Amplifier
Strong and Durable cast aluminum enclosure
Dimensions: 13.5"L x 3"D x 9"W
Authorized Dealer
1-year Manufacturer's Warranty
Note: Not compatible with the factory-equipped subwoofer system
What's in the box:
Amplified enclosure with one 8" subwoofer installed
80" Wiring harness (Power/ Ground/ Speaker level input)
Wrangler radio T-Harness (with in-line fuse holder)
Two 15 amp ATO fuses (one installed in the power wire fuse holder/ 1 spare)
Remote level control with 15' cable attached (3.5mm mini-plug on end)
Adhesive-backed hook and loop mounting fasteners (to mount the remote)
2 Wrangler mounting brackets
Eight M4x10mm Machine screws (each with a flat washer and split lock washer)
Four M6x10mm Machine screws
Fifteen 7" Zip ties
Installation instructions
Owner's manual (English/ French/ Spanish)
Warranty information
Online product registration information
System installation notice
Alpine PWE-S8-WRA owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.