Car Subwoofers (392)

Rockford Fosgate P1S2-12 Punch P1 2-Ohm 12" 500W Max (250W RMS) 12" Single Subwoofer Rockford Fosgate showcases its fanatical commitment to sonic excellence through the Punch Series of speakers, amplifiers, and subwoofers. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd. General Features : 12" Single 2 ohm Punch P1 Series Subwoofer Peak Power Handling: 500 Watts RMS Power Handling: 250 Watts Kevlar Reinforced Pulp Paper Cone Nitrile Butadiene Rubber NBR Surround High-temp voice coil with spun-laced Nomex® reinforcement collar Linear spider with embedded 16 AWG tinsel leads Custom 10-AWG nickel-plated push terminals StampCast basket with integrated spider venting Rubberized ABS trim ring Extended pole piece and bumped vented backplate Protective PVC textured magnet cover 2" High Temperature Voice coil 9.0 mm Xmax 45 oz. Single-stacked magnet motor structure Frequency Response: 20 - 250 Hz Resonance Frequency (Fs): 25 Hz Sensitivity: 86 dB Recommended sealed box volume: 1.02 cubic feet Recommended ported box volume: 1.79 cubic feet Top-mount depth: 6" Cutout diameter: 11.22" CTA-2031 Compliant What's in the P1S2-12 package: P1S2-12 owner's manual One 12" Single voice coil 2-ohm subwoofer Trim ring Eight 1-1/4" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate P1S2-12 Punch P1 2-Ohm 12" 500W Max (250W RMS) 12" Single Subwoofer Rockford Fosgate showcases its fanatical commitment to sonic excellence through the Punch Series of speakers, amplifiers, and subwoofers. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd. General Features : 12" Single 2 ohm Punch P1 Series Subwoofer Peak Power Handling: 500 Watts RMS Power Handling: 250 Watts Kevlar Reinforced Pulp Paper Cone Nitrile Butadiene Rubber NBR Surround High-temp voice coil with spun-laced Nomex® reinforcement collar Linear spider with embedded 16 AWG tinsel leads Custom 10-AWG nickel-plated push terminals StampCast basket with integrated spider venting Rubberized ABS trim ring Extended pole piece and bumped vented backplate Protective PVC textured magnet cover 2" High Temperature Voice coil 9.0 mm Xmax 45 oz. Single-stacked magnet motor structure Frequency Response: 20 - 250 Hz Resonance Frequency (Fs): 25 Hz Sensitivity: 86 dB Recommended sealed box volume: 1.02 cubic feet Recommended ported box volume: 1.79 cubic feet Top-mount depth: 6" Cutout diameter: 11.22" CTA-2031 Compliant What's in the P1S2-12 package: P1S2-12 owner's manual One 12" Single voice coil 2-ohm subwoofer Trim ring Eight 1-1/4" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB8 PrismaLink™ S2-Series sealed subwoofer enclosure with 8" subwoofer and RGB lighting Alpine's PrismaLink S2-Series powered subwoofer enclosures combine great Alpine bass with stunning visual appeal. Integrated RGB lighting bars make your system look as good as it sounds while rugged built-in S2-Series subwoofers deliver the sonic goods. The rugged polypropylene box stands up to the stresses of car life, and its wedge-shaped design allows it to fit in more places. The pre-wired dual RGB lighting bars can be controlled by the included wireless remote or through the screen of the Alpine ILX-W650 receiver (sold separately). You can link multiple S2-S8B enclosures with the optional KTX-LK8 bracket for a kaleidoscopic multi-sub system. For the final touch, a twist-lock mounting system makes it easy to add one of Alpine's specially designed-speaker grilles (sold separately). This S2-SB8 features Alpine's S2-W8D4 subwoofer with dual 4-ohm voice coils wired for 2-ohm impedance. Its carbon fiber/polypropylene cone and HAMR multi-roll rubber surround deliver powerful bass. It handles up to 300 watts of RMS power (900 watts peak), so you can feed it plenty of power. General Features: Sealed polypropylene enclosure with one S2 Series 8" woofer Carbon fiber/polypropylene cone with ceramic/polypropylene dust cap High-Amplitude Multi-Roll (HAMR) rubber surround integrated RGB lighting bars linkable to additional S2-SB8 enclosures with KTX-LK8 linking kit (sold separately) includes twist-lock surround trim ring 2-ohm total impedance power handling: 300watts (900 watts peak) frequency response: 23-215 Hz 8" Dual 2 ohms S Series Subwoofer Peak Power Handling: 900 watts RMS Power Handling: 300 watts Carbon Fiber Polypropylene Cone High Amplitude Multi-Roll (HAMR) Rubber Surround Twist-lock grille mount system Poly Propylene / Ceramic Dust Cap 1.4" High-temperature Copper voice coil 13 mm Xmax 34 oz. Single Stacked Ferrite magnet motor structure Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-SB8 package: S2-SB8 owner's manual Linkable ported enclosure loaded with one S2-W8D4 subwoofer IR Remote control 6" RGB wiring harness Product registration information Warranty information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB10 PrismaLink™ S2-Series sealed subwoofer enclosure with 10" subwoofer and RGB lighting Alpine's PrismaLink S2-Series powered subwoofer enclosures combine great Alpine bass with stunning visual appeal. Integrated RGB lighting bars make your system look as good as it sounds while rugged built-in S2-Series subwoofers deliver the sonic goods. The rugged polypropylene box stands up to the stresses of car life, and its wedge-shaped design allows it to fit in more places. The pre-wired dual RGB lighting bars can be controlled by the included wireless remote or through the screen of the Alpine ILX-W650 receiver (sold separately). You can link multiple S2-S10B enclosures with the optional KTX-LK10 bracket for a kaleidoscopic multi-sub system. For the final touch, a twist-lock mounting system makes it easy to add one of Alpine's specially-designed speaker grilles (sold separately). This S2-SB10 features Alpine's S2-W10D4 subwoofer with dual 4-ohm voice coils wired for 2-ohm impedance. Its carbon fiber/polypropylene cone and HAMR multi-roll rubber surround deliver powerful bass. It handles up to 600 watts of RMS power (1800 watts peak), so you can feed it plenty of power. Product highlights: Sealed polypropylene enclosure with one S2 Series 10" woofer Carbon fiber/polypropylene cone with ceramic/polypropylene dust cap High-Amplitude Multi-Roll (HAMR) rubber surround integrated RGB lighting bars linkable to additional S2-SB10 enclosures with KTX-LK10 linking kit (sold separately) includes twist-lock surround trim ring 2-ohm total impedance power handling: 600 watts (1800 watts peak) frequency response: 23-215 Hz warranty: 1 year ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB12 PrismaLink™ S2-Series sealed subwoofer enclosure with 12" subwoofer and RGB lighting Alpine's PrismaLink S2-Series powered subwoofer enclosures combine great Alpine bass with stunning visual appeal. Integrated RGB lighting bars make your system look as good as it sounds while rugged built-in S2-Series subwoofers deliver the sonic goods. The rugged polypropylene box stands up to the stresses of car life, and its wedge-shaped design allows it to fit in more places. The pre-wired dual RGB lighting bars can be controlled by the included wireless remote or through the screen of the Alpine ILX-W650 receiver (sold separately). You can link multiple S2-S12B enclosures with the optional KTX-LK12 bracket for a kaleidoscopic multi-sub system. For the final touch, a twist-lock mounting system makes it easy to add one of Alpine's specially-designed speaker grilles (sold separately). This S2-SB12 features Alpine's S2-W12D4 subwoofer with dual 4-ohm voice coils wired for 2-ohm impedance. Its carbon fiber/polypropylene cone and HAMR multi-roll rubber surround deliver powerful bass. It handles up to 600 watts of RMS power (1800 watts peak), so you can feed it plenty of power. Product highlights: Sealed polypropylene enclosure with one S2 Series 12" woofer Carbon fiber/polypropylene cone with ceramic/polypropylene dust cap High-Amplitude Multi-Roll (HAMR) rubber surround integrated RGB lighting bars linkable to additional S2-SB12 enclosures with KTX-LK12 linking kit (sold separately) includes twist-lock surround trim ring 2-ohm total impedance power handling: 600 watts (1800 watts peak) frequency response: 23-215 Hz warranty: 1 year ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.