Car Subwoofers (479)

Power Acoustik EW-104S 1200W Class S RMS Subwoofer The Power Acoustik EW-104S is a shallow-mount 10-inch subwoofer designed for tight-fit installations where standard-depth enclosures are not feasible. As part of the Edge Series, this model strikes a balance between power, precision, and space-conscious design, making it a solid option for sealed and compact vehicle subwoofer applications. With 1200 watts peak and 600 watts RMS power handling, the EW-104S provides strong low-end output without demanding oversized enclosures or excessive power draw. The 4-ohm single voice coil configuration pairs easily with most mono or multi-channel car amplifiers. Built with a polypropylene cone, stamped steel basket, and a 2-inch 4-layer copper voice coil, this subwoofer maintains cone rigidity and long-term thermal stability. A 60 oz magnet structure delivers steady motor force for accurate bass control, even in sealed boxes with a volume of less than 0.75 cubic feet. General Features: 10″ shallow-mount subwoofer, ideal for under-seat or tight trunk installs 1200W max power, 600W RMS 4-ohm single voice coil, copper wound, 2″ diameter Mounting depth: ~2.5″ for space-limited enclosures Sensitivity: 81.3 dB, responsive to moderate power Frequency response: 25Hz – 250Hz Polypropylene cone with treated foam surround Sealed box optimization, recommended ~0.75 ft³ enclosure volume Specifications EW-104S Max Power Handling 1,200 Watts RMS Power Handling 600 Watts Efficiency (1w/1m) 81.30 Voice Coil Configuration 2.00″ 4Ω Motor Volume 60oz Mounting Depth 2.50″ Optimum Sealed Enclosure ft³ 0.75   The EW-104S is tuned for those seeking deep bass in minimal space. Whether you’re configuring a stealth system, upgrading factory sub performance, or simply want strong lows without compromising trunk volume, this 10-inch shallow-mount subwoofer gets the job done. It aligns with searches like “power acoustik 10 inch subwoofer”, “shallow mount subs 10”, “1200w 4-ohm car subwoofer”, and “edge series 10 inch car subwoofer”, all while keeping real specs front and center. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik BAMF-152 15" 3800W Series Subwoofer When it's time to shake the pavement and deliver gut-punching lows, the Power Acoustik BAMF-152 brings the force. Engineered for hard-hitting SPL performance, this 15-inch subwoofer isn't built for background bass — it’s designed for full-throttle sound systems that push serious power. High-Performance Design for 15″ Bass Demands The 3″ 4-layer voice coil, wound on a rugged aluminum former, handles up to 3,800 watts peak and 1,900 watts RMS. The oversized motor structure and extended 12mm T-yoke with top plate maximize low-frequency dynamics while enhancing heat dispersion through a vented frame and motor design. Built for Brutality The non-magnetic, non-resonant die-cast aluminum basket locks down structural stability at high excursion levels. A spruce pulp cone, reinforced for rigidity and treated for chemical resistance, delivers clean low-end with tight response. The polyether foam surround, engineered for extreme flexibility and UV durability, accommodates deep-cone movement under high-SPL loads. Every Decibel Counted From stitched and glued surround/cone joints to dual poly-cotton spiders, this subwoofer minimizes mechanical noise and manages cone travel with precision. The direct-connect wire leads handle intense current flow, while stitched voice coil leads reinforce durability under violent acceleration. Application-Ready for High-Power Systems Perfect for competition builds and street setups needing extreme output from a single sub. With a dual 2-ohm voice coil configuration, it gives you flexible wiring options to match your amplifier’s output. Whether you're running 4,000 watts of pure mono power or stacking amplifiers, the BAMF-152 responds with raw, controlled aggression. Specifications BAMF-152 Max Power Handling 3,800 Watts RMS Power Handling 1,900 Watts Efficiency (1w/1m) 86.10 Voice Coil Configuration 3″ Dual 2Ω Motor Volume 272 oz Mounting Depth 8.00″ Optimum Sealed Enclosure ft3 2.00 Optimum Ported Enclosure ft3 4.00   Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik BAMF-154 15" 3800W RMS Subwoofer When it's time to dominate the low-end frequencies with raw, mechanical force, the Power Acoustik BAMF-154 answers the call. Engineered for uncompromising SPL demands, this 15-inch dual-voice-coil subwoofer delivers relentless output and is constructed with precision to withstand the punishing dynamics of high-wattage systems. At the core of the BAMF-154 lies a 3-inch, 4-layer voice coil wound on a high-temperature aluminum former, built to resist heat fatigue even during extended competition sessions. This voice coil is paired with a 272oz motor structure, providing the magnetic inertia needed to move substantial air and generate room-shaking bass. The spruce pulp fiber cone provides the perfect balance of rigidity and lightness, maintaining its shape under heavy excursion. Surrounding the cone is a high-density polyether foam surround designed to manage long travel with precision control, reinforced further by hybrid suspension dampers for reduced distortion. This subwoofer's dual 4-ohm impedance design gives you flexible wiring options for optimized amplifier matching—perfect for running at 1-ohm stable or 2-ohm configurations depending on your setup. Whether you're building a competition box or pushing daily driving limits, the BAMF-154 thrives in ported and sealed enclosures, tuned for high-output sound pressure levels. General Features: Overcompensating Motor Structure for Increased Magnetic Strength 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up Non-Magnetic Non-Resonate Die-Cast Aluminum Frame 3” 4-Layer Voice Coil w/ Direct Connect Wire Increases Power Handling High-Temperature Tolerance Adhesives Resist Thermal Failure Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection Stitched and Glued Surround/Cone Joints for Strongest Bonding Extended Excursion Polyether Foam Surround w/ UV Protection Dual Poly-Cotton Suspension Dampen Violent Accelerations Stitched Voice Coil Leads Prevent Potential Damage 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included Key Specifications: Size: 15" Impedance: Dual 4 Ohm Max Power: 3,800 Watts Voice Coil: 3" 4-layer on aluminum former Magnet: 272oz motor assembly Cone: Spruce pulp fiber Surround: High-excursion polyether foam Mounting Depth: 7.5" Recommended Enclosures: Sealed or Ported Specifications BAMF-154 Max Power Handling 3,800 Watts RMS Power Handling 1,900 Watts Efficiency (1w/1m) 86.40 Voice Coil Configuration 3″ Dual 4Ω Motor Volume 272 oz Mounting Depth 8.00″ Optimum Sealed Enclosure ft3 2.00 Optimum Ported Enclosure ft3 4.00 Built for Real Bass Heads The BAMF-154 isn't a flashy showpiece—it’s a battle-tested tool made for true SPL warriors. Whether you're competing or cruising, expect uncompromising performance with deep, responsive low-frequency reproduction that doesn’t miss a note. No gimmicks. No unnecessary flash. Just pure, brutal sub-bass engineered by Power Acoustik, a name trusted by bass fanatics who know the difference between loud and earth-moving. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik BAMF-122 12" 3500W Series Subwoofer The Power Acoustik BAMF-122 isn’t just another 12-inch subwoofer—it’s a high-output powerhouse built to dominate SPL lanes and street setups alike. Designed for audio enthusiasts who demand maximum impact from their bass, this subwoofer packs serious hardware into a solid, competition-ready frame. With its 3” 4-layer voice coil wound on a high-temp aluminum former, the BAMF-122 can withstand extreme heat during high-volume sessions. Its overcompensating motor structure dramatically increases magnetic force, allowing this driver to respond with greater pressure and cleaner low-frequency extension. The result? Hard-hitting bass output that doesn’t back down. The non-transfer spruce pulp cone provides excellent rigidity while maintaining a warm, natural tone. Paired with an extended excursion polyether foam surround, this setup delivers controlled linear movement and deep resonance. The vented T-yoke and die-cast aluminum frame help dissipate heat, minimizing thermal distortion and preserving clarity at peak wattage. Engineered with reliability in mind, the BAMF-122 includes stitched and glued cone-to-surround joints, high-temperature adhesives, and direct connect wiring to ensure your power transfer is efficient and secure. General Features: Subwoofer Size: 12 inch Voice Coil: 3" 4-layer aluminum-wound Configuration: Dual 2 Ohm Power Handling: 1,750W RMS / 3,500W Max Cone Material: Spruce pulp, non-transfer, UV-treated Surround: Extended excursion polyether foam Basket: Die-cast aluminum, non-resonant Magnet: Massive motor structure for high inertia Cooling: Vented T-yoke & top plate Mounting Depth: Optimized for standard and custom enclosures Connection: Direct connect wire terminals Built for Those Who Want It Louder Whether you're assembling a daily driver that slaps or a competition trunk setup that turns heads, the BAMF-122 offers the tools to make it happen. Precision-built with stabilized cone movement, poly-cotton dual suspension, and thermal-resistant materials, this subwoofer delivers long-term performance and aggressive low-frequency control without compromise. This isn't your average bass driver—this is a Power Acoustik BAMF 12” subwoofer built to shake panels, pressure cabins, and bring intensity to every decibel. Ideal for: SPL setups Trunk-mounted enclosures Ported and sealed box builds Dual subwoofer applications Mid-size cars, SUVs, trucks Specifications: Specifications BAMF-122 Max Power Handling 3,500 Watts RMS Power Handling 1,750 Watts Efficiency (1w/1m) 85.00 Voice Coil Configuration 3″ Dual 2Ω Motor Volume 272 oz Mounting Depth 6.75″ Optimum Sealed Enclosure ft3 1.00 Optimum Ported Enclosure ft3 2.00   Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio VSP8BMW BMW® 8" Subwoofer OEM Replacement (Pair) Elevate your driving experience with Diamond Audio’s high-end, vehicle-specific BMW replacement speakers. Engineered in the United States and designed for seamless integration, these speakers bring superior sound quality to your BMW with ease. Say goodbye to the factory sound and embrace a new level of audio clarity and richness. Our BMW replacement speakers are meticulously crafted to deliver enhanced sound quality, ensuring every note is crystal clear and every beat is felt. Designed as a plug-and-play product, our BMW replacement speakers offer hassle-free installation. No complex modifications or additional components are needed – simply replace your factory speakers and enjoy an immediate upgrade in sound performance. At Diamond Audio, we pride ourselves on delivering products that embody high-end quality and reliability. Our BMW replacement speakers are engineered with precision, using the finest materials and cutting-edge technology to ensure long-lasting performance and exceptional audio fidelity. Proudly engineered in the United States, Diamond Audio’s BMW replacement speakers represent the pinnacle of American craftsmanship and innovation. Our commitment to quality and excellence shines through in every detail, from design to production. Specifications: 100W RMS 200W Max Power Handling High-Strength Stamped Steel Frame    Glass Fiber Reinforced Cone FEA Optimized High-Power Neodymium Motor Structure Milled Voice Coil Cooling Vents With Polished Backplate Separate Optimized Crossover Module Klippel® Optimized Motor And Suspension Symmetry Plug & Play OEM Replacement Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DPSTX12 600W Peak (300W RMS) Loaded Single 11" Spare Tire Subwoofer Enclosure   Diamond Audio introduces its first-ever spare tire applications: powered and non-powered subwoofers. For those seeking more bass for their audio system while still keeping their trunk space, Diamond Audio’s DMD series spare tire application subwoofers are the perfect solution! Constructed with a solid non-resonant die-cast aluminum enclosure designed to maximize the full bass output of the subwoofer while making it simple for installation, the DMD series spare tire application subwoofers are an easy upgrade choice! General Features: Spare tire enclosure with 1 11" DMD Series Subwoofer Solid, non-resonant die-cast aluminum enclosure Maintains trunk space while delivering high-quality bass Fits Most Vehicles: No need to remove the spare tire Non-amplified, passive design for consistent performance Peak Power Handling: 600 watts RMS Power Handling: 300 watts Final Impedance: 4-ohm Fs-Free Air Resonance (Hz)20-500Hz Frequency Response: 20 - 500 Hz Dimensions: 14.2" L x 4.92" H Authorized Internet Dealer 1-year Manufacturer's Warranty Pair with the DMD250.1D, or the MICRO1V2 Monoblock Amplifier along with the HX82 Amplifier Kit for the best sound and performance. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DPUS12 600W Peak (300W RMS) Loaded Single 11" Spare Tire Subwoofer Enclosure  Diamond Audio’s line of under-seat enclosures boasts unique features designed to simplify installation, alleviate space concerns, and be compatible with OEM audio signal outputs. The DPUS12 offers 20V line-level inputs for OEM integration. To combat poor OEM signal quality, the DPUS12 features dual bass controls, one for level and the second with Diamond Audio's exclusive bass enhancement control. The DPUS12 also includes the standard low-pass, subsonic filters, and phase adjustments. Notably, the enclosure/amplifier housing is remarkably compact, yet solid with its cast aluminum construction, ensuring it fits a wide range of applications while delivering impressive output from the onboard 12” subwoofer. This compact design reassures you that the DPUS12 powered subwoofer will not only enhance your audio experience but also saves valuable space in your vehicle. It is designed to fit under seats and can also be mounted if needed. General Features: Single 12" Sealed Loaded Subwoofer Enclosure with Built-In Amplifier Peak Power Handling: 400 watts RMS Power Handling: 200 watts Built-in Class D amplifier Includes wired remote bass level controller Features dual bass controls (one for level, one for DBEE) Sealed Underseat enclosure Saves valuable space in your vehicle with its compact design Designed to fit under seats and can be mounted if needed Compatible with OEM audio signal outputs Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: DMD Series 12" Subwoofer Polypropylene-Carbon Fiber Hybrid Cone Nitrile Butadiene Rubber NBR Surround Amplifier Features: Class D Monoblock Amplifier Power, protect, and status LED indicator Dual remote for Diamond Bass Enhancement Engine (DBEE) Thermal, short, and overload protection circuitry Speaker-level (high-level) inputs 20 volts high-level and low level inputs Features an auto-turn-on circuit function PWM MOSFET power supply for smooth connection Phase Level Adjustment: 0 - 180 degrees Low-Pass Crossover Frequency: 50 - 150 Hz Bass Boost: 0 - 16 dB Subsonic Filter: 20 Hz (fixed) Fuse Rating: 30A x 1  Enclosure Features: 12" Sealed Enclosure Super slim and compact enclosure construction Box Finish: Die-cast Black Aluminum Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DPUS10 400W Peak (200W RMS) Loaded Single 10" Sealed Underseat Enclosure with Bass Remote  The DPUS10, an addition to Diamond’s line of under-seat enclosures, boasts unique features designed to simplify installation, address audio issues from the OEM vehicle’s audio signal, and alleviate space concerns. The DPUS10 offers 20V line-level inputs and auto turn-on circuits for OEM integration. To combat poor OEM signal quality, the DPUS10 features dual bass controls, one for level and the second with Diamonds’ exclusive bass enhancement engine. The DPUS10 also includes the standard low-pass, subsonic filters, and phase adjustments. Notably, the enclosure/amplifier housing is remarkably compact, yet solid with its cast aluminum construction, ensuring it fits a wide range of applications while delivering impressive output from the onboard 10 inch powered subwoofer and 200WRMS amplifier. This compact design reassures you that the DPUS10 will not only enhance your audio experience but also save valuable space in your vehicle. General Features Single 10" Sealed Loaded Subwoofer Enclosure with Built-In Amplifier Power Handling: Peak: 400 watts RMS: 200 watts Built-in Class D amplifier Includes bass remote for Diamond Bass Enhancement Engine (DBEE) DBEE signal bandwidth adjustment feature Super-slim Under seat subwoofer enclosure Gauge power and ground wiring is recommended for installation Enclosure Dimensions: 13.58" L x 9.65" W x 2.76" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" DMD Series Subwoofer Polypropylene Cone Nitrile Butadiene Rubber NBR Surround Slim and shallow subwoofer construction Black spider with woven tinsel leads Vented pole piece for cooler operation Klippel optimized motor and suspension symmetry Sensitivity: 84.0 dB Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Thermal, short, and overload protection circuits Auto turn-on signal circuit Speaker-level (high-level) inputs 120 volts high-level and low-level inputs PWM MOSFET power supply for reliable connection Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 16 dB Subsonic Filter: 20 Hz (fixed) RCA Preamp Output: No Fuse Rating: 30A x 1  Enclosure Features: 10" Sealed Enclosure Box Finish: Black Aluminum Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DPUS8 DMD Series 8" Active Slim Subwoofer w/Bass Enhancement The DPUS8, an addition to Diamond’s line of under-seat enclosures, boasts a range of unique features designed to simplify installation, address audio issues from OEM vehicle’s audio signal, and alleviate space concerns. For OEM integration, the DPUS8 offers 20V line-level inputs and auto turn-on circuits. To com-bat poor OEM signal quality, the DPUS8 features dual bass controls, one for level and the second with Diamonds’ exclusive bass enhancement circuit. The DPUS8 also includes the standard low-pass and subsonic filters, as well as phase adjustments. Notably, the enclosure/amplifier housing is remarkably compact, ensuring it fits a wide range of applications while still delivering impressive output from the onboard 8” subwoofer and 100WRMS amplifier. General Features: Single 8" Sealed Loaded Subwoofer Enclosure with Built-In Amplifier Power Handling: Peak: 250 watts RMS: 100 watts Final Impedance: Built-in Class D amplifier Includes Remote Bass Level Controller Sealed Underseat enclosure Compact and fits under vehicle seat without compromising storage Simple installation, no major modification required 4 AWG gauge power and ground wiring is recommended for installation Enclosure Dimensions: 7.1" TD x 7.1" W x 8.84" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 8" Subwoofer Polypropylene Cone material Rubber Surround material Magnet Motor Structure DMD Series Amplifier Features: Class D Monoblock Amplifier Diamond bass enhancement circuit PWM MOSFET power supply Adjustable input sensitivity (low level and high level) Power/Protect/Status LED indicator Thermal, short, overload protection Phase Adjustment: 0 - 180 degree Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 16 dB Subsonic Filter: 20 Hz (fixed) Speaker-level (high-level) inputs (20 volts) Fuse Rating: 20A x 1  Enclosure Features: 8" Sealed Enclosure Super slim enclosure design Box Finish: Die-cast Black Aluminum Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DESMB12A 1000W Peak (500W RMS) Loaded Single 12" Vented Amplified Enclosure.  The Diamond Elite DES Series subwoofers epitomize quality craftsmanship and precision engineering, delivering the best performance in their class. Designed for versatility, these new DES subwoofers are perfect for a variety of enclosure designs, providing dynamic sound and that signature Diamond Audio bass, capable of withstanding long, extended listening sessions. Constructed with a high-grade reinforced hybrid paper fiber cone structure, the DES subwoofers handle extreme power effortlessly. The popular impedance switch feature adds to their versatility, ensuring that these subwoofers meet your specific audio needs without disappointment. Diamond Audio’s new Microbox subwoofer system clearly delivers impressive bass output in a small package! These Microboxes come preloaded with a single or dual pair option of DES series 12 inch powered subwoofer. Constructed from high-strength MDF with extensive bracing and lock-tight fastening, ensuring no leaks and distortion-free bass response. General Features: Power Handling (Subwoofer):500W RMS/1000W MAX 12" 4Ω Dual Voice Coil Subwoofer 500 Watt Class-D Amplifier Bass Boost: 0/+6dB/+9dB Twin T-Filter (narrow Q) LPF Filter: 50Hz-150Hz Phase: Variable 0°-180­° PWM MOSFET Power Supply/Thermal Dimensions (LxDxH) 24"x11"x14.4" (609mm x 277mm x 368mm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega H7104S HED Series 10" SVC Subwoofer (4Ω) Cerwin Vega Subwoofers are renowned for producing high-quality subwoofers that are favored by car audio enthusiasts for their durability, power handling, and exceptional sound performance. Cerwin Vega subwoofers combine advanced engineering with high-quality materials to deliver robust and reliable bass performance, making them a top choice for car audio enthusiasts looking to enhance their audio experience.   2 Ohm or 4 Ohm Configuration, these subwoofers are available in different impedance configurations (2 ohm or 4 ohm), providing flexibility for various wiring setups and compatibility with different amplifiers. This allows you to optimize your system for maximum performance.  HED Series Subwoofers can handle substantial power, making them suitable for high-output applications. They are designed to handle high wattage without distortion, ensuring clean, powerful bass. Specifications: SPEAKER SIZE - 10” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM VOICE COIL DIAMETER - INCH (MM) - 2” THIELE/SMALL PARAMETERS SENSITIVTY (1W/1M): 85DB VAS (L): 40.4 XMAX (MM): 7(MM) POWER HANDLING RMS: 200W POWER HANDLING MAX: 1000W MOUNTING DIAMETER: 9.7” (246.4MM) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega XE12DV XED Dual 12" Loaded Vented Enclosure Cerwin Vega Subwoofers are renowned for producing high-quality subwoofers that are favored by car audio enthusiasts for their durability, power handling, and exceptional sound performance. Cerwin Vega subwoofers combine advanced engineering with high-quality materials to deliver powerful and reliable bass performance, making them a top choice for car audio enthusiasts looking to enhance their audio experience.   2 Ohm or 4 Ohm Configuration, these subwoofers are available in different impedance configurations (2 ohm or 4 ohm), providing flexibility for various wiring setups and compatibility with different amplifiers. This allows you to optimize your system for maximum performance.  XED Series Subwoofers are capable of handling substantial amounts of power, making them suitable for high-output applications. They are designed to manage high wattage without distortion, ensuring clean and powerful bass. Specifications: SPEAKER SIZE - 12” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 2 NUMBER OF VOICE COILS - DUAL CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM FREQUENCY RESPONSE (HZ): 20HZ-500HZ VOICE COIL DIAMETER - INCH (MM) - 2” POWER HANDLING RMS: 450W POWER HANDLING MAX: 1600W MOUNTING DIAMETER : 772.16MM Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.