Social Media (2556)

Diamond Audio MICRO2V2 Micro Series 500W 2-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro2v2 2-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Adjustable Bass EQ (45Hz: 0dB to +12dB) Wired Remote Level Control included Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 250W X 2 RMS Power (4Ω): 150W X 2 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 500W Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: up to 10.0V Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.011Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz - 350Hz Crossover (-12dB/Oct): Variable High-Pass:40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Fuse Ratings: ATC: 25A Dimensions: 7.89” L x 4.0” W x 1.46” H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Diamond Audio HXM800.2D 2-Channel 800 Watts RMS Class D Full-Range HXM Series Amplifier The Diamond Audio HXM800.2D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: Motorsport Series 2-Channel Full-Range Class-D Marine Amplifier Power Output: 300W RMS x 2 @ 4Ω 400W RMS x 2 @ 2Ω 800 W x 1 @ 4Ω bridged Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability Four-layer, glass epoxy circuit board for enhanced performance and reliability Circuit board conformal coated (water resistant) for marine applications Full Range Class D amplifier technology Bridgeable for high power operation Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX),12V Remote (REM), and DC offset (DC) Fully variable, 12 dB per octave, electronic crossover Full range, line-level outputs provided to send a signal to another amplifier Adjustable Bass EQ (MICRO-USB) to connect our optional Bluetooth receiver-controller Top-mounted controls for convenient adjustment Integrated soft clip light for quick system set-up Illuminated logo THD: 0.05% S/N Ratio: < 77.2 dB Low Input Level: 0.2mV - 10.0V Bandwith: 10Hz-35Hz Variable High-Pass: 40-400Hz @ 12dB / Oct Variable Low-Pass: 40-400Hz @ 12dB / Oct Bass Remote Included Dimensions: 9.74"L x 5.27"W x 1.75"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio HXM800.4D 4-Channel 800W RMS Class D Full-Range HXM Series Amplifier The Diamond Audio HXM800.4D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: High-Density Aluminum Alloy Heat Sink with Backlit Logo Full Range Class D (IR) Chipset Four Layers PCB Design for Reduced Footprint Size Switchable 12dB HP/FLAT/LP Crossovers Integrated Soft Clip Light for Quick System Set-up BTR Port for Optional Bluetooth Receiver Control Total Power: 800W Power at 4-Ohm: 120W x 4-Ch Power at 2-Ohm: 200W x 4-Ch THD: 0.3% Frequency Response: 10Hz ~ 35kHz (-3dB) Signal-to-Noise Ratio: > -90dB Overall Efficiency: > 80% Input Sensitivity: 0.2 ~ 10.0V Dimensions: 9.35" x 5.27" x 1.75" ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio MICRO5V2 5-Channel 950W RMS Class D Car Motorcycle ATV Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 5-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact high-density aluminum alloy chassis provide superior thermal stability. Four-layer, a glass circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2CH/4CH) Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Remote level control for Mono channel (CH5) included Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4/350W x 1 RMS Power (4Ω): 80W x 4/200W x 1 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2/200W x 1 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: Flat or Fixed 70Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: ATC: 60A Dimensions: 10.65” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute Strike Series ST-1500 2000-Watt 10-Inch Dual 4-Ohm Car Subwoofer Absolute ST-1500 Strike Series 10" subwoofer has the formula for hard-hitting bass, a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A large 2" foam surround helps to provide a smooth woofer path for accuracy, while the 200 oz. Double-stacked magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The push spring terminals on this cast basket woofer ensure that your connection is secure and your sound is uninterrupted. The ST-1500 has dual voice coils that allow versatility in wiring for high output or maximum efficiency, so you can set up your system to suit your preference. This sub works well in a sealed or ported enclosure. Note: If you are wiring this DVC sub for lower impedance, ensure your amp is compatible. Most car amplifiers are stable to 2 ohms in standard mode, or 4 ohms in bridged operation. General Features: 10" Dual 4-Ohm Strike Series Car Subwoofer Power Handling: 2000 Watts P.M.P.O Power Handling: 1000 Watts Max Power Handling: 700 Watts RMS (350 watts per coil) Impedance: Dual 4 Ohm Laminated Fiberglass Pulp Cone huge foam surround 2" Foam Woofer surround Push spring terminals Dust cap with Absolute logo 3.00" Dual 4-layer high-temperature voice coils Large 200oz Dual-Stack Vented Magnet frequency response 23-500 Hz sensitivity 91.1 dB top-mount depth 5-1/4" sealed box volume: 0.4-.95 cubic feet ported box volume: 1.632 cubic feet Weight: 29.5 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute Strike Series ST-1500 2000-Watt 10-Inch Dual 4-Ohm Car Subwoofer The Absolute ST-1500 Strike Series 10" subwoofer has the formula for hard-hitting bass, a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A large 2" foam surround helps to provide a smooth woofer path for accuracy, while the 200 oz. Double-stacked magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The push spring terminals on this cast basket woofer ensure that your connection is secure and your sound is uninterrupted. The ST-1500 has dual voice coils that allow versatility in wiring for high output or maximum efficiency, so you can set up your system to suit your preference. This sub works well in a sealed or ported enclosure. Note: If you are wiring this DVC sub for lower impedance, ensure your amp is compatible. Most car amplifiers are stable to 2 ohms in standard mode, or 4 ohms in bridged operation. General Features: 10" Dual 4-Ohm Strike Series Car Subwoofer Power Handling: 2000 Watts P.M.P.O Power Handling: 1000 Watts Max Power Handling: 700 Watts RMS (350 watts per coil) Impedance: Dual 4 Ohm Laminated Fiberglass Pulp Cone huge foam surround 2" Foam Woofer surround Push spring terminals Dust cap with Absolute logo 3.00" Dual 4-layer high-temperature voice coils Large 200oz Dual-Stack Vented Magnet frequency response 23-500 Hz sensitivity 91.1 dB top-mount depth 5-1/4" sealed box volume: 0.4-.95 cubic feet ported box volume: 1.632 cubic feet Weight: 29.5 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute AXIS Series AX-1000 1000-Watt 10-Inch Dual 4-Ohm Car Subwoofer The Absolute AX-1000 AXIS Series 10" subwoofer has the formula for hard-hitting bass, a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A sizeable High excursion foam surround helps to provide a smooth woofer path for accuracy, while the 100 oz. Double-stacked magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The Binding post terminals on this cast basket woofer ensure that your connection is secure, so your sound is uninterrupted. The AX-1000 has dual voice coils that allow you versatility in wiring for high output or maximum efficiency, so you can set up your system to suit your preference. This sub works well in a sealed or ported enclosure. Note: If you are wiring this DVC sub for lower impedance, ensure your amp is compatible. Most car amplifiers are stable to 2 ohms in standard mode, or 4 ohms in bridged operation. General Features: 10" Dual 4-Ohm AXIS Series Car Subwoofer Power Handling: 1500 Watts P.M.P.O Power Handling: 750 Watts Max Power Handling: 500 Watts RMS (250 watts per coil) Impedance: Dual 4 Ohm Laminated Fiberglass Pulp Cone huge foam surround 2" Foam Woofer surround Binding post terminals Dust cap with Absolute logo 2.5" BASV Dual 4-layer high-temperature voice coils Large 200oz Dual-Stack Vented Magnet frequency response 23-500 Hz sensitivity 89 dB top-mount depth 5-1/4" sealed box volume: 0.4-.95 cubic feet ported box volume: 1.632 cubic feet Weight: 25.00lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Absolute AXIS Series AX-1000 1000-Watt 10-Inch Dual 4-Ohm Car Subwoofer The Absolute AX-1000 AXIS Series 10" subwoofer has the formula for hard-hitting bass: a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A large High excursion foam surround helps to provide a smooth woofer path for accuracy, while the 100 oz. Double-stacked magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The Binding post terminals on this cast basket woofer ensure that your connection is secure, so your sound is uninterrupted. The AX-1000 has dual voice coils that allow you versatility in wiring for high output or maximum efficiency, so you can set up your system to suit your preference. This sub works well in a sealed or ported enclosure. Note: If you are wiring this DVC sub for lower impedance, ensure your amp is compatible. Most car amplifiers are stable to 2 ohms in standard mode or 4 ohms in bridged operation. General Features: 10" Dual 4-Ohm AXIS Series Car Subwoofer Power Handling: 1500 Watts P.M.P.O Power Handling: 750 Watts Max Power Handling: 500 Watts RMS (250 watts per coil) Impedance: Dual 4 Ohm Laminated Fiberglass Pulp Cone huge foam surround 2" Foam Woofer surround Binding post terminals Dust cap with Absolute logo 2.5" BASV Dual 4-layer high-temperature voice coils Large 200oz Dual-Stack Vented Magnet frequency response 23-500 Hz sensitivity 89 dB top-mount depth 5-1/4" sealed box volume: 0.4-.95 cubic feet ported box volume: 1.632 cubic feet Weight: 25.00lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute Excursion Series EX-900 900-Watt 10-Inch Dual 4-Ohm Car Subwoofer The Absolute EX-900 Excursion Series 10" subwoofer is engineered for deep, hard-hitting bass without sacrificing musical detail. Featuring a non-pressed pulp cone, it delivers fast response and lasting durability, ideal for both tight bass lines and sustained low-end notes. A high-excursion foam surround ensures smooth, controlled cone movement for greater accuracy, while the powerful 100 oz. Double-stacked magnets allow the sub to handle high power levels with ease. To maintain clean, distortion-free sound, the sub is equipped with an extended pole piece and a vented backplate that helps dissipate heat. Secure push spring terminals make wiring simple and reliable, and the dual voice coil design offers flexible wiring options to match your setup for maximum efficiency or output. Compatible with both sealed and ported enclosures, the EX-900 delivers versatile, powerful bass performance that adapts to your listening style. Note: If you are wiring this DVC sub for lower impedance, ensure your amp is compatible. Most car amplifiers are stable to 2 ohms in standard mode or 4 ohms in bridged operation. General Features: 10" Dual 4-Ohm Excursion Series Car Subwoofer Power Handling: 1350 Watts P.M.P.O Power Handling: 900 Watts Max Power Handling: 450 Watts RMS (225 watts per coil) Impedance: Dual 4 Ohm Laminated Fiberglass Pulp Cone huge foam surround 2" Foam Woofer surround Binding post terminals Dust cap with the Absolute logo 2.5" BASV Dual 4-layer high-temperature voice coils Large 200oz Dual-Stack Vented Magnet frequency response 27-1200 Hz sensitivity 87 dB top-mount depth 5-1/4" sealed box volume: 0.4-.95 cubic feet ported box volume: 1.632 cubic feet Weight: 20.00 lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute Excursion Series EX-900 900-Watt 10-Inch Dual 4-Ohm Car Subwoofer Absolute EX-900 Excursion Series 10" subwoofer has the formula for hard-hitting bass a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A large High excursion foam surround helps to provide a smooth woofer path for accuracy, while the 100 oz. double-stacked magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The Push spring terminals on this cast basket woofer ensure that your connection is secure, so your sound is uninterrupted. The EX-900 has dual voice coils that allow you versatility in wiring for high output or maximum efficiency, so you can set up your system to suit your preference. This sub works well in a sealed or ported enclosure. Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation. General Features: 10" Dual 4-Ohm Excursion Series Car Subwoofer Power Handling: 1350 Watts P.M.P.O Power Handling: 900 Watts Max Power Handling: 450 Watts RMS (225 watts per coil) Impedance: Dual 4 Ohm Laminated Fiberglass Pulp Cone huge foam surround 2" Foam Woofer surround Binding post terminals Dust cap with Absolute logo 2.5" BASV Dual 4-layer high-temperature voice coils Large 200oz Dual-Stack Vented Magnet frequency response 27-1200 Hz sensitivity 87 dB top-mount depth 5-1/4" sealed box volume: 0.4-.95 cubic feet ported box volume: 1.632 cubic feet Weight: 20.00lbs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.