Social Media (2544)

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run the dash speakers off the front channels, the back speakers off the rear channels, and the subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers higher efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes a test tone CD Test tones are also available as MP3 downloads from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty..3 setup disc" (Punch amps and the 3sixty..3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminates the need for a remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier No onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Red Amp Kit The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Punch P1650 220W Max 6.5" 2-Way P1 Punch Series Coaxial Speakers w/ PEI Dome Tweeter The Punch P1650 is a P1 full-range speaker system featuring a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles and a coaxially mounted tweeter. Fanatics that need a great-sounding speaker to replace factory-installed versions will certainly benefit from this Punch series full-range speaker. The P1650 offers a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new "European Basket" to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6-1/2" P1 Punch Series 2-Way Car Speakers Power Handling: Peak: 220 watts per pair / 110 watts each RMS: 110 watts per pair / 55 watts each Recommended power range: 10 - 55 watts RMS per channel Injection-Molded Carbon Fiber-filled Polypropylene cone material 3/4" PEI Dome Tweeter Santoprene rubber surround CEA-2031 compliant speakers 1" high-temperature voice coil Integrated ICC crossover filter removes unwanted frequencies from the drivers DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Rubber magnet boot cover Grilles and mounting hardware included 4 ohms impedance Frequency response: 45 - 20,000 Hz Top-mount depth: 2-1/4"" Sensitivity: 88dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1650 package: Two 2-way speakers 2 Grilles Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation manual P1650 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters Bundle with Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit The R165X3 is a 6.50” 3-way full-range speaker rated at 90 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. General Features: Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome pole mounted Piezo tweeter and midrange Integrated tweeter crossover Grilles and mounting hardware included CEA-2031 Compliant Configuration: 3-Way Full-Range Midrange Diameter (in): 6.5" Midrange Depth (in): 2.15" (54.5mm) Tweeter Diameter (in): .50" (12mm) Frequency Response: 52Hz - 20kHz Nominal Impedance: 4-Ohm Power Handling (RMS): 45 Watts RMS 90 Watts MAX Crossover: Tweeter High-Pass (HP): 6dB Sensitivity (dB @ 1 watt/1 meter): 91 dB Grilles Included: Yes Mounting Hardware: Yes Priced Per 2 Pair Authorized Dealer 1 Year Warranty What's in the R165X3 package: Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire Eight 1-1/4" Self-tapping screws 8 Speed clips Installation/Operation manual R165X3 owner's manual The R1T-S is a 1/2” mylar-balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory replacement speakers delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low-distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface, and angle configurations. General Features: Prime Series Tweeter Kit Power Handling: Peak: 160 watts per set / 80 watts each side Power Handling: RMS: 80 watts per set / 40 watts each side Recommended power range: 10 - 40 watts RMS per channel CEA-2031 Compliant speaker system Klippel verified speaker-certified 1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction Low distortion material allows accurate reproduction of high frequencies for an open sound stage Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Frequency response: 2,500 - 22,000 Hz Free air resonance: 2,600 Hz Sensitivity: 72.5 dB Surface/angle and flush mount Contains mounting hardware Grilles/trim rings included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R1T-S package: Two 1" tweeters (with attached 6' speaker wire terminated by quick-slide connectors) 2 Flush-mounting brackets (installed) 2 Flush mount retaining rings 2 Surface mounting brackets Four 5/8" Flat head screws Installation and Operation Instructions R1T-S owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit & Fosgate R169X3 Prime 6” x 9” 3-Way Full-Range Coaxial Speaker (Pair) Rockford Fosgate R169X3 6x9" 260-Watt 3 Way Car Speakers The Rockford Fosgate R169X3 is a 6”x9” 3-way full-range speaker rated at 65 watts (130W per 4 pack) RMS for a new generation of factory replacement speakers. Kit includes integrated high pass crossovers and mounting hardware. The 6"x9" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome pole mounted Piezo tweeter and midrange. Includes grilles so they look as good as they sound. General Features: R169X3 New Rockford Fosgate R169X3 6x9" 260-Watt 3 Way Car Speakers (2 Pairs) 130 Watt Max (260 Watt per 4 Speakers) 65 Watt RMS (130 Watt per 4 Speakers) Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome flush mounted tweeter Integrated tweeter crossover Impedance: 4 Ohm Sensitivity: 90dB Frequency Response: 47Hz 20kHz Crossover: Tweeter High Pass (HP): 6dB Klippel Verified Klippel is a speaker certification program allowing us to deliver the best possible speakers. ICC Crossover the Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look CEA 2031 Compliant Grills Included Product Condition: Brand New Part Number: R169X3 1 Year Manufacturer Warranty What's in the box:Rockford Fosgate R169X3 owner's manual Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire (each has female quick-slides on one end and tinned bare wire on the other) Eight 1-1/4" Screws 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Rockford Fosgate PRIME R1T-S 160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters The R1T-S is a 1/2” mylar balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory replacement speakers delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface, and angle configurations. General Features: Prime Series Tweeter Kit Power Handling: Peak: 160 watts per set / 80 watts each side Power Handling: RMS: 80 watts per set / 40 watts each side Recommended power range: 10 - 40 watts RMS per channel CEA-2031 Compliant speaker system Klippel verified speaker certified 1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction Low distortion material allows accurate reproduction of high frequencies for an open sound stage Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Frequency response: 2,500 - 22,000 Hz Free air resonance: 2,600 Hz Sensitivity: 72.5 dB Surface/angle and flush mount Contains mounting hardware Grilles/trim rings included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R1T-S owner's manual Two 1" tweeters (with attached 6' speaker wire terminated by quick-slide connectors) 2 Flush-mounting brackets (installed) 2 Flush mount retaining rings 2 Surface mounting brackets Four 5/8" Flat head screws Installation and Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit & Metra 72-4568 Speaker Harness for Selected General Motor VehiclesMetra 72-4568 Speaker Harness for Selected General Motor VehiclesSpeaker Harness for Select GM Vehicles Rockford Fosgate PRIME R1T-S 160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters The R1T-S is a 1/2” mylar balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory replacement speakers delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface, and angle configurations. General Features: Prime Series Tweeter Kit Power Handling: Peak: 160 watts per set / 80 watts each side Power Handling: RMS: 80 watts per set / 40 watts each side Recommended power range: 10 - 40 watts RMS per channel CEA-2031 Compliant speaker system Klippel verified speaker certified 1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction Low distortion material allows accurate reproduction of high frequencies for an open sound stage Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Frequency response: 2,500 - 22,000 Hz Free air resonance: 2,600 Hz Sensitivity: 72.5 dB Surface/angle and flush mount Contains mounting hardware Grilles/trim rings included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R1T-S owner's manual Two 1" tweeters (with attached 6' speaker wire terminated by quick-slide connectors) 2 Flush-mounting brackets (installed) 2 Flush mount retaining rings 2 Surface mounting brackets Four 5/8" Flat head screws Installation and Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca