00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier Bundle
$679.99
$723.99
Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag & Mobile Bracket Holder and Electrical Tape
Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis
The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT
Revolutionary IPR class D topology
Detented input controls
Speakon output connectors
Light Weight
LED illuminated
Combi XLR 1/4" inputs
Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
Individual signal pass 1/4" jacks on each channel
Weight Unpacked: 8.16 lb(3.7 kg)
Weight Packed: 10.80 lb(4.9 kg)
Width Packed: 12.4"(31.496 cm)
Height Packed: 21"(53.34 cm)
Depth Packed: 4.7"(11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier + 2 Speaker Stand Bundle
$679.99
$723.99
Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag.
Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis
The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT
Revolutionary IPR class D topology
Detented input controls
Speakon output connectors
Light Weight
LED illuminated
Combi XLR 1/4" inputs
Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
Individual signal pass 1/4" jacks on each channel
Weight Unpacked: 8.16 lb(3.7 kg)
Weight Packed: 10.80 lb(4.9 kg)
Width Packed: 12.4"(31.496 cm)
Height Packed: 21"(53.34 cm)
Depth Packed: 4.7"(11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier + 2 PV25 Speaker Cable
$679.99
$723.99
Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable
Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis
The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT
Revolutionary IPR class D topology
Detented input controls
Speakon output connectors
Light Weight
LED illuminated
Combi XLR 1/4" inputs
Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
Individual signal pass 1/4" jacks on each channel
Weight Unpacked: 8.16 lb(3.7 kg)
Weight Packed: 10.80 lb(4.9 kg)
Width Packed: 12.4"(31.496 cm)
Height Packed: 21"(53.34 cm)
Depth Packed: 4.7"(11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR2 5000 2-channel 5000W Lightweight Power Amplifier
$1,199.99
$1,447.99
Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis
IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz
Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz
Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz
Two-channel independent, fourth-order Linkwitz-Riley crossovers
DDT protection
Revolutionary IPR class D topology
Detented input controls
Combination XLR 1/4" inputs
Four pole twist lock output connectors
Ultra-lightweight
Individual signal pass 1/4" jacks on each channel
LED illuminated
Standby, LED power present indication
Packed Weight: 17.42 lb (7.9 kg)
Packed Length: 21.2" (53.85 cm)
Packed Width: 21" (53.34 cm)
Packed Height: 6" (15.24 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR 2 3000 Lightweight Power Amplifier
$749.99
$970.15
PPeavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis
IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT Circuitry
Revolutionary IPR class D topology
Combi XLR 1/4" inputs
Speakon output connectors
Light Weight
LED illuminated
Detented input controls
1750 Watts at 2 ohms
950 Watts at 4 ohms
525 Watts at 8 ohms
Individual signals pass 1/4" jacks on each channel.
Weight Unpacked: 8.16 lb (3.7 kg)
Weight Packed: 10.80 lb (4.9 kg)
Width Packed: 12.5" (31.75 cm)
Height Packed: 21" (53.34 cm)
Depth Packed: 4.7" (11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR 2 2000 2-Channel 2000W Lightweight Power Amplifier
$679.99
$723.99
Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis
The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT
Revolutionary IPR class D topology
Detented input controls
Speakon output connectors
Light Weight
LED illuminated
Combi XLR 1/4" inputs
Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
Individual signal pass 1/4" jacks on each channel
Weight Unpacked: 8.16 lb(3.7 kg)
Weight Packed: 10.80 lb(4.9 kg)
Width Packed: 12.4"(31.496 cm)
Height Packed: 21"(53.34 cm)
Depth Packed: 4.7"(11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR2 3000 3000 Watt Class D Pro Power Amplifier + 2 Stand & Cables
$899.99
$1,500.00
Peavey IPR2 3000 3,000 Watt Class D Pro Power Amplifier Amp + 2 MR DJ SS350 Stand & Two 25 Feet Speakon to 1/4" Cables
IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dPEAVramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
Built-in Peavey-exclusive DDT circuitry protects your speakers
Revolutionary IPR class D topology
Combi XLR 1/4" inputs
Speakon output connectors
Light Weight
LED illuminated
Detented input controls
Rated Watts 2ch x 2 ohms 1750 watts 20ms repetitive burst / 1450 watts 1% THD both ch. driven @ 1kHz
Rated Watts 2ch x 4 ohms 950 watts 20ms repetitive burst / 900 watts 1% THD / 815 watts 0.2% THD, both ch. driven @ 1kHz
Both ch are rated Watts 2ch x 8 ohms 525 watts 20ms repetitive burst / 500 watts 1% THD / 430 watts 0.15% THD. driven @ 1kHz
Individual signals pass 1/4" jacks on each channel.
Packed Weight: 10.8 lb (4.9 kg)
Packed Length: 21" (53.34 cm)
Packed Width: 12.5" (31.75 cm)
Packed Height: 4.7" (11.94 cm)
Groundbreaking IPR Series power amplifier is lightweight, efficient, and reliable.
High-speed class D topology delivers high-resolution
Variable-speed fan housed inside lightweight aluminum chassis
Combi 1/4"/XLR inputs
Neutrik speakon outputs
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR2 3000 3000 Watt Class D Pro Power Amplifier Amp
$899.99
$1,350.00
Peavey IPR 2 3000 Lightweight Power Amplifier
IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT Circuitry
Revolutionary IPR class D topology
Combi XLR 1/4" inputs
Speakon output connectors
Light Weight
LED illuminated
Detented input controls
1750 Watts at 2 ohms
950 Watts at 4 ohms
525 Watts at 8 ohms
Individual signals pass 1/4" jacks on each channel.
Weight Unpacked: 8.16 lb (3.7 kg)
Weight Packed: 10.80 lb (4.9 kg)
Width Packed: 12.5" (31.75 cm)
Height Packed: 21" (53.34 cm)
Depth Packed: 4.7" (11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey IPR2 3000 3000 Watt Class D Pro Power Amplifier Amp+ Mic System+2 Cables
$899.98
$1,500.00
Peavey IPR2 3000 3,000 Watt Class D Pro Power Amplifier Amp+ MSP1 Mic System + 2 PV 25' Cables
Peavey IPR 2 3000 Lightweight Power Amplifier
IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
General Features:
2- Channel independent fourth-order Linkwitz-Riley crossovers
DDT Circuitry
Revolutionary IPR class D topology
Combi XLR 1/4" inputs
Speakon output connectors
Light Weight
LED illuminated
Detented input controls
1750 Watts at 2 ohms
950 Watts at 4 ohms
525 Watts at 8 ohms
Individual signals pass 1/4" jacks on each channel.
Weight Unpacked: 8.16 lb (3.7 kg)
Weight Packed: 10.80 lb (4.9 kg)
Width Packed: 12.5" (31.75 cm)
Height Packed: 21" (53.34 cm)
Depth Packed: 4.7" (11.938 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey KB 2 50 Watt Keyboard Amplifier Combo Speaker & PV 20' Ft. 1/4" to 1/4' Cable
$359.99
$599.99
Peavey KB 2 50 Watt Keyboard Amplifier Combo Speaker & PV 20' Ft. 1/4" to 1/4' CableThe KB series amps are self-contained, compact sound systems perfect for voice, keyboards, acoustic and electric guitars, drum machines, and backing machines.
General Features:
Four separate channels
Channels 1 & 2 have 1/4" inputs
Channel 3 features XLR and 1/4" inputs
Channel 4 features a 1/4" monitor input with level control
Channels 1 & 2 have 2-band EQ
Channel 3 has a three-band EQ
Headphone out
10-inch coax speaker
FX send/return
Balanced XLR main out
Bi-amped 45 watts and 12 watts
Weight Unpacked: 34.00 lb(15.422 kg)
Weight Packed: 40.00 lb(18.144 kg)
Width Packed: 21.12"(53.6448 cm)
Height Packed: 22.12"(56.1848 cm)
Depth Packed: 16.62"(42.2148 cm)
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine iLX-W670 Receiver, 2 Pair SXE-1751S 6.5" Component & KTA-450 Power Pack
$599.90
$694.90
Alpine iLX-W670 Digital Multimedia Receiver w/ 2 Pairs Alpine SXE-1751S 6.5" Component Set & Power Pack
This premium bundle comprises an Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility.
2x Alpine SXE-1751S 6 1/2" Component Speakers for well-balanced audio, and an Alpine KTA-450 4-Channel Amplifier with dynamic peak power for amplifying signals. The Alpine iLX-W670 Receiver transforms car audio with its 7-inch touchscreen display and intuitive interface.
It comes with a Sound Boost menu with subwoofer controls and is also equipped with Apple CarPlay and Android Auto. Personalize audio with a 13-band graphic EQ, 6-channel time correction, and crossovers for clear sound that resonates.
Its features are: 7" Touchscreen Display, Standard Double-Din Fitment, Apple Carplay and Android Auto, Bluetooth Hands-Free, SiriusXM-Ready. Technical details: Camera Input: 1 USB Input: 1 4V Pre-Outs: 3 Built-in Amplifier: 16W RMS/45W Peak x 4. Next are the Alpine SXE-1751S 6 1/2" Component Speakers.
With an RMS Power of 45W and a peak power of 280W, they deliver high-quality sound. The specifications include a frequency response of 60Hz-20kHz, a neodymium tweeter, and a ferrite woofer, ensuring powerful sound reproduction.
The last item in the bundle is the compact Alpine KTA-450 4-Channel Amplifier, which utilizes Alpine's exclusive DPP technology to deliver powerful, optimal sound in tight spaces.
Its features include a class D amplifier circuit and dynamic peak power doubling for dynamic music. It requires no additional cables, offers a tidy installation, and comes with a power stacking bracket.
General Features :
4-Ohm Power output: 50W RMS x 4
2-Ohm Power output: 45W RMS x 4
Dynamic peak power output 4-Ohm: 100W RMS x 4
THD Rated Power: Less Than 0.1% Frequency Response: 15Hz - 50kHz
Input Sensitivity: RCA/Speaker
Weight: 1.3lb
Items included: Amplifier, Wire Harness, Bracket Set, Cable Tie, Self-Tapping Screw, Mounting Brackets.
Experience amplified audio entertainment with this all-in-one bundle.
Intuitive 7-inch touchscreen display for easy navigation and app control (iLX-W670).
Enhanced audio with Sound Boost menu, subwoofer controls, and lighting link feature (iLX-W670).
Smartphone integration with Apple CarPlay and Android Auto compatibility (iLX-W670).
Fine-tune your sound with 13-band EQ, time correction, and versatile crossovers (iLX-W670).
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mr. Dj AS305 Hybrid Pre Amplifier Built-in Bluetooth USB/SD Card Reader AM/FM Tuner 1000 Watts p.m.p.o
$129.99
$299.99
Mr. Dj AS305 Hybrid Pre Amplifier Built-in Bluetooth USB/SD Card Reader AM/FM Tuner 1000 Watts p.m.p.o
Upgrade your home movie night by adding the MR DJ Bluetooth Home Audio Speaker Amplifier System. You can easily use this amplifier system with a PC or laptop, smartphone, DVD player, gaming system, and more.
This home audio system from MR DJ is ideal for achieving surround sound in your home theater, living room, or den. The receiver is compatible with Bluetooth technology up to 30 feet away. Use this home audio amplifier system to stream a party playlist from your phone, tablet, or other smart devices. The front control panel has a sleek LED display. Blue lights help indicate different settings for the home system.
The professional integrated stereo receiver is equipped with Bluetooth wireless music streaming. Works with today’s latest devices including smartphones, iPhones, iPads, laptops, and computers with hassle-free receiver pairing
General Feature:
Mr. Dj AS305 hybrid Pre amplifier built-in Bluetooth USB/SD card Reader AM/FM tuner 1000 Watts P.M.P.O
Power Output @ 4 Ohm: 200 Watts X 2 Max
High-Powered Hybrid Preamplifier Receiver
2 speaker output & 1 Subwoofer Output
Powers up to (3) Speakers
AM/FM Radio with LCD Digital Display
USB Flash Drive & SD Memory Card Readers
MP3 Digital Audio File Support
Connect and stream Audio from External Devices
(2) 1/4’’ Microphone Inputs
RCA (L/R) Audio Connectors
Screw-Type Speaker Terminal Binding Posts
Volume, Subwoofer, Tone, Echo, Mic. Volume Setting
Front Panel Button Control Center
Rack-Mountable
Built-in Bluetooth for wireless music streaming, digital VFD display with AM/FM Radio, USB flash & SD memory card
Receives Wireless Signal for Audio Streaming
Works with All of Your Favorite Devices
Led backlight illumination with dimmer control
RCA (L/R) Audio Input jacks
Dual mono RCA jacks dedicated to subwoofer output
2 audio inputs, 1 audio output,
2 speaker output & 1 Subwoofer Output
Color: Black
Dimensions (L x W x H): 14 x 10.4 x 7.6 inches
Weight: 15.75 pounds, 7.15 Kilogram
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.