Receivers & Amplifiers (140)

Peavey IPR™ 2 2000 Lightweight Power Amp IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Packed Weight: 10.8 lb (4.9 kg) Packed Length: 21" (53.34 cm) Packed Width: 12.4" (31.5 cm) Packed Height: 4.7" (11.94 cm) Specifications: Shipping Weight  :  4.9 kg Shipping Dimensions  : 21 × 12.4 × 4.7 in Item Number : 3609460 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR™ 2 5000 Lightweight Power Amp IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-light weight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Specifications: Shipping Weight  :  7.9 kg Shipping Dimensions :   21.2 × 21 × 6 in Item Number : 3004350 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR™ 2 7500 Lightweight Power Amp IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-light weight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Specifications: Shipping Weight  :  8.34 kg Shipping Dimensions  : 21.2 × 21 × 6 in Item Number : 3004250 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART DTI 2-channel Hum Eliminator The DTI Dual Transformer / Isolator uses a pair of high-performance transformers to reduce hum and ground loop noise, separating the input and output signal grounds for total isolation between two systems. The transformers are wound for 1:1 unity gain, and have an extremely flat and wide frequency response. Even at high signal levels, they provide clean, transparent sound. With XLR, 1/4” TRS, and RCA connectors on all inputs and outputs, the DTI is flexible and easy to integrate. Featuring a rugged aluminum enclosure and a passive design that doesn’t require external power, the DTI is built for years of reliable use. General Features: 2x XLR Inputs and Outputs 2x 1/4" Inputs and Outputs 2x RCA Inputs and Outputs 10 Hz - 50 kHz Frequency Response 0.01% THD (Typical at 1 kHz, +18 dBU) Passive Design - No Power Required Specifications: Active or Passive Passive Inputs 2x Balanced XLR2x Balanced / Unbalanced 1/4" TRS2x RCA Outputs 2x Balanced XLR2x Balanced / Unbalanced 1/4" TRS2x RCA Frequency Response 10 Hz - 50 kHz (+/- 0.5 dB @ +4 dBu) Total Harmonic Distortion 0.01% (Typical @ 1 kHz, +18 dBu)< 0.05% @ 100 Hz, +24 dBu Insertion Loss 0.4 dB (100 kΩ Load)5.5 dB (600Ω Load) Dimensions (HWD) 3.5" x 4.2" x 1.75"8.9 cm x 10.7 cm x 4.45 cm Weight 0.75 lbs / 340 g **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART CLEANBOXPRO 2-channel Balanced / Unbalanced Level Converter The CleanBox Pro is a convenient solution for connecting consumer A/V and professional audio equipment. It provides two channels of unbalanced-to-balanced level conversion, and two channels of balanced-to-unbalanced level conversion. The balanced signals use XLR connectors, the unbalanced signals use stereo RCA and 1/8” TRS jacks, and there are independent volume controls for both the balanced and unbalanced output levels. Balanced lines offer increased immunity to external electrical noise and hum, and are the preferred method of connecting audio gear, especially over long cable runs. Need to get the analog output from a laptop, phone, or disc player to a mixer or PA system, or vice-versa? This is your box. General Features: 2-Channel Balanced / Unbalanced Level Convertor 2x XLR Inputs and Outputs Stereo RCA and 1/8" Inputs and Outputs Independent Level Controls for Balanced / Unbalanced Outputs Power Adapter Included Specifications: Active or Passive Passive Inputs 2x Balanced / Unbalanced 1/4" TRS Outputs 2x Balanced / Unbalanced 1/4" TRS Frequency Response 20Hz to 20kHz, +/-1 dB Signal to Noise Ratio > 90dB Total Harmonic Distortion <0.1% @ 1 kHz Power Requirements 7.5-12 V AC/DC, <150 m Dimensions (HWD) 4.5" x 2.875" x 1.5"11.4 cm x 7.3 cm x 3.8 cm Weight 0.9 lbs / 408 g **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART HP-1 Battery-Powered Clip-On Headphone Amplifier The HP-1 is a compact, battery-powered headphone amplifier for players who prefer a wired connection for their in-ear monitors. It features a locking Combo input for XLR and 1/4 TRS connections, and an 1/8 headphone output with a volume control. The HP-1 is switchable for mono or stereo operation, and provides over 40 hours of performance from two AA batteries. With a rugged enclosure and heavy-duty jacks, the HP-1 is built to withstand the rigors of the road and deliver clear, powerful, reliable sound. General Features: Locking Combo Input Jack Balanced Mono / Unbalanced Stereo Switch 1/8" Headphone Output Over 40 Hours of Battery Life (2x AA) Battery Status LED Sturdy Belt Clip Specifications: Inputs 1/4" /XLR combo jack Outputs 3.5mm Jack (1/8”) Input Impedance 5K Ω Maximum Output Level 105mW @ 0.1% THD Maximum Gain +9 dB Total Harmonic Distortion ≤ .02% @1kHz Typical. Power Requirements 2-AA batteries Included Dimensions (LWH) 1.6” x 72” x 5.4, (4.6 cm x 13.7 cm × 43.cm ). Weight 0.51 lbs. / 0.23kg **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART HEADAMP4 4-Channel Headphone Amplifier The HeadAmp 4 is a high-output, low-noise, low-distortion headphone amplifier that extends the connectivity of your mixer, audio interface, or other sound source. It features four output channels with independent volume controls. Each output has 1/4 and 1/8 stereo connections that can be used simultaneously, so you can connect up to 8 pairs of headphones. Compact and durable, the HeadAmp 4 is an ideal solution to split a signal between multiple listeners. General Features: 4x Output Channels Independent Volume Per Channel Stereo 1/4" and 1/8" Inputs 2x 1/4" and 1/8" Headphone Outputs per Channel Supports up to 8 Pairs of Headphones 12V DC Adapter Included Specifications: Inputs 1/4" & 1/8" Outputs 1/4" & 1/8" Input Impedance 90.9k Ω Output Impedance 47 Ω (Each Output) Maximum Input Level +14 dBV Maximum Output Level +14 dBu Maximum Gain 20 dB Frequency Response 20 – 20 kHz Total Harmonic Distortion <0.01% Signal to Noise Ratio > 90dB (ref 0 dBu) Power Requirements 12 V DC Dimensions (LWH) 4.1″ x 4.6″x 1.85″, 104 cm x 117 cm x 47cm Weight 1.3 lbs (0.61kg) **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART HEADAMP6PRO 6-Channel Headphone Amplifier The HeadAmp 6 Pro is ARTs most fully-featured headphone amplifier. It has six channels with flexible controls, detailed metering, and two outputs per channel, so up to twelve sets of headphones can be connected simultaneously. Each channel features an independent auxiliary input with a balance control, so its easy to dial in a more me mix. Additional switches mute the left or right signal and sum the channel to mono, so listeners have the control to hear exactly what they need. The main signal bus and output channels feature 8-segment LED meters with clip indicators for detailed visual feedback. The rear panel has balanced XLR and 1/4 inputs, and Thru connectors to chain multiple units for even more outputs. A Direct input on the front panel overrides the rear signal, so you can easily switch sources without getting behind the rack. The HeadAmp 6 Pro offers the most control of any ART headphone amplifier, and is ideal for working with medium to large ensembles. General Features: 6x Output Channels Stereo XLR and 1/4" XLR Balanced Inputs 1/4" Direct In Overrides Rear Inputs 2x 1/4" Headphone Outputs per Channel Supports up to 12 Pairs of Headphones Aux In with Main / Aux Balance per Channel Mono L and Mono R Switches per Channel 2-Band EQ per Channel LED Meters with Clip Indicators for Main Bus and Output Channels 1U Rackmount Specifications: Inputs XLR, 1/4" Outputs 1/4" Maximum Input Level +20 dBu Frequency Response 10 Hz to 40 KHz +/- 1 dB Total Harmonic Distortion <0.010% (Typical) Power Requirements 120 vac 60 Hz Dimensions (LWH) 6.5″x 5.9″ x 1.75″, 16.5cmx 15.0 cm x 4.45 cm Weight 2.5 lbs. (1.14 kg) ***Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART HEADAMP6 6-Channel Headphone Amplifier The HeadAmp 6 is a six-channel stereo headphone amplifier with three outputs per channel, so up to eighteen sets of headphones can be connected simultaneously. Each channel features an independent auxiliary input with a balance control, so its easy to dial in a more me mix. Additional switches mute the left or right signal and sum the channel to mono, so listeners have the control to hear exactly what they need. LED meters with clipping indicators for the main signal bus and each output channel confirm signal activity at a glance. The rear panel has balanced XLR and 1/4 inputs, and Thru connectors to chain multiple units for even more outputs. A Direct input on the front panel overrides the rear signal, so you can quickly switch sources without getting behind the rack. The HeadAmp 6 offers the most outputs of any ART headphone amplifier, and is ideal for working with large ensembles. General Features: 6x Output Channels Stereo XLR and 1/4" Balanced Inputs 1/4" Direct In Overrides Rear Inputs 3x 1/4" Headphone Outputs per Channel Supports up to 18 Pairs of Headphones Aux In with Main / Aux Balance per Channel Mute L, Mute R, and Mono Switches per Channel LED Meters with Clip Indicators for Main Bus and Output Channels 1U Rackmount Specifications: Inputs XLR, 1/4" Outputs XLR, 1/4" Input Impedance 40K Ω Main, 10K Ω Direct, 15K Ω Aux In Output Impedance <12 ΩHeadphones Maximum Input Level +21 dBu Maximum Output Level 150mW (600 Ω Headphones) 500mW (32 Ω Headphones) 150mW (8 Ω Headphone Maximum Gain 22 dB Total Harmonic Distortion <.01% Typical Signal to Noise Ratio >90dB Typical CMRR >40 dB Power Requirements 120 VAC / 50-60 Hz, or 230 VAC / 50 Hz, 15 W Dimensions (LWH) 6" x 19" x 1.75", 15.2 cm x 48.3 x 4.45 Weight 5.3 lbs. (2.4kg) **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor YBX212 2 x 12-inch Guitar Extension Cabinet -120 Watts Built as the perfect companion for the Traynor YBA-1 Tribute Head, the 120-watt Traynor YBX212 extension cabinet delivers massive tone in a compact -stack package. Loaded with a pair of 12-inch Celestion Vintage30s in a vertical slanted cabinet design, the YBX212 delivers massive projection and -stack tone in an affordable, more manageable cabinet solution. General Features: Designed to be the ideal companion cabinet for Traynor YBA-1 Tribute head Innovative vertical 2 x 12-inch slant cabinet design Delivers massive tone and maximum projection Loaded with Celestion Vintage30 speakers Solid plywood cabinet construction Made in Canada Specifications: Cabinet Program Power (Watts) 120 Cabinet Impedance (Ohms) 8 Speaker Configuration – LF 2 x 12-inch Celestion Vintage 30 Dimensions (DWH, inches) 18.90 x 15.35 x 31.49 Dimensions (DWH, cm) 48 x 39 x 80 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor YGL1 15 Watt Battery Powered Amplifier Perfect for rehearsal or street corner concert, the 15-watt Traynor TVM15s three-channel design allows quick connection to any microphone, instrument and media player. Individual volume controls on each input makes the TVM15 the complete ultra-compact PA system solution. Channel one is ideal for vocals with an XLR / TRS combi-jack input, and independent tone control. A 1/4-inch input on channel two easily handles any instrument source including acoustic guitars, electric guitars or keyboards. An additional RCA auxiliary Input allows quick connection to any additional audio device. The TVM15s wedge monitor shape projects to an intimate audience from ground level. An integrated stand adaptor allows the TVM15 to be mounted on any speaker stand when used as a small announcement PA or background music source. General Features: Rechargeable 15 Watt battery powered amplifier Full range with 6-inch woofer and 2-inch tweeter XLR / TRS Combi-jack input with level and tone control 1/4-inch instrument level input with independent input Gain RCA line level inputs for media player with level control 3-band master EQ 1/4-inch line out for connecting multiple TVM15’s for wider coverage Convenient wedge monitor shape Integrated speaker stand adaptor Charge level indicator Specifications: Power @ min. impedance (Watts) 15 Speaker Configuration - LF 6-inch Speaker Configuration – HF Piezo Tweeter Channel 1 – Inputs Combi-Jack (1/4-inch / XLR female) Channel 1 – Controls Gain, Tone Channel 2 – Inputs 1/4-inch Instrument Input Channel 2 – Controls Gain Channel 3 – Inputs 2 x RCA Line Level Inputs Channel 3 – Controls Aux Volume Main Tone Controls Bass, Mid, Treble Line Out (type / configuration) 1 x 1/4-inch, Pre-EQ LED Indicators Power; Charger LED (rear) 4x Battery Level (rear) Other Features Rechargable battery Dimensions (DWH, inches) 10.25 x 13.75 x 11.75 Dimensions (DWH, cm) 26 x 34.5 x 30 Weight (lbs / kg) 17.5 / 8 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TVM15 15 Watt Battery Powered Amplifier Perfect for rehearsal or street corner concert, the 15-watt Traynor TVM15s three-channel design allows quick connection to any microphone, instrument and media player. Individual volume controls on each input makes the TVM15 the complete ultra-compact PA system solution. Channel one is ideal for vocals with an XLR / TRS combi-jack input, and independent tone control. A 1/4-inch input on channel two easily handles any instrument source including acoustic guitars, electric guitars or keyboards. An additional RCA auxiliary Input allows quick connection to any additional audio device. The TVM15s wedge monitor shape projects to an intimate audience from ground level. An integrated stand adaptor allows the TVM15 to be mounted on any speaker stand when used as a small announcement PA or background music source. General Features: Rechargeable 15 Watt battery powered amplifier Full range with 6-inch woofer and 2-inch tweeter XLR / TRS Combi-jack input with level and tone control 1/4-inch instrument level input with independent input Gain RCA line level inputs for media player with level control 3-band master EQ 1/4-inch line out for connecting multiple TVM15’s for wider coverage Convenient wedge monitor shape Integrated speaker stand adaptor Charge level indicator Specifications: Power @ min. impedance (Watts) 15 Speaker Configuration - LF 6-inch Speaker Configuration – HF Piezo Tweeter Channel 1 – Inputs Combi-Jack (1/4-inch / XLR female) Channel 1 – Controls Gain, Tone Channel 2 – Inputs 1/4-inch Instrument Input Channel 2 – Controls Gain Channel 3 – Inputs 2 x RCA Line Level Inputs Channel 3 – Controls Aux Volume Main Tone Controls Bass, Mid, Treble Line Out (type / configuration) 1 x 1/4-inch, Pre-EQ LED Indicators Power; Charger LED (rear) 4x Battery Level (rear) Other Features Rechargable battery Dimensions (DWH, inches) 10.25 x 13.75 x 11.75 Dimensions (DWH, cm) 26 x 34.5 x 30 Weight (lbs / kg) 17.5 / 8 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.