Pro Signal Processors & Recorders (68)

ART MX622BT 6-Channel Stereo Mixer with EQ & Bluetooth The MX622BT is a rackmount mixer with Bluetooth® connectivity, an effects loop, and onboard EQ. Channels 1 through 3 have stereo RCA inputs, and channel 3 also has an 1/8” stereo input on the front panel. Channels 4 through 6 have mono XLR inputs that are switchable between mic and line level, as well as switchable phantom power. The rear panel has balanced 1/4” and stereo RCA outputs. Each input has a dedicated level control, and you can enhance your mix with the master 2-band EQ and switchable effects loop to integrate external signal processing. You can also use the effect return jacks as an additional stereo input controlled by the Effects Level knob. It’s particularly well-suited for retail, restaurant, corporate, or academic settings that need to combine wired and wireless A/V sources with up to three microphones, but its versatile features and range of connections make the MX622BT easy to integrate in almost any audio application. General Features: Bluetooth 5.0 receiver Three balanced XLR inputs with separate Mic/Line switch, Level control and Clip Indicator Three pairs of RCA stereo inputs with separate Level controls Selectable 15 Volt Phantom power for each Mic channel Balanced 1/4-inch TRS Main outputs with Master Level control Versatile Bass and Treble equalization on Main outputs Front TRS stereo 1/8-inch Input jack Stereo Record Out RCA jacks Effects Loop with Effects Level control and In/Out switch 1/4-inch Effects Send with stereo Returns Internal power supply Solid metal case Specifications: Inputs 3x XLR balanced2x 1/4" unbalanced6x RCA1x 1/8" balanced Outputs 2x 1/4" TRS balanced1x 1/4" unbalanced2x RCA Input Impedance 600/22K Ω Mic/Line XLR inputs, 10K Ω RCA inputs, 22K , 1/4" EFX Returns Output Impedance 50 Ω 1/4" Main outputs, 1 K Ω RCA Record outputs, 100Ω EFX output Maximum Input Level -10 dBu/+20 dBu Mic/Line XLR inputs, +20 dBu RCA line inputs, +20 dBu EFX inputs Maximum Output Level +24 dBu balanced Main outputs, +20 dBu RCA Record outputs, +20 dBu EFX output Maximum Gain 56 dB / 26 dB Mic/Line, 26 dB RCA inputs Total Harmonic Distortion <1% typical Signal to Noise Ratio >90 dB typical Phantom Power +15 Volts DC, regulated low noise Connectivity Bluetooth: v5.0, up to 30M range, Class 2 device Power Requirements 105 to 125 VAC / 50 Hz - 60 Hz, 15 W typical. Export units configured for country of destination Dimensions (HWD) 1.75" x 19.0" x 6.0" (4.45 cm x 48.3 cm x 15.2 cm Weight 6.2 lbs. / 2.8kg **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART MX524 Five Channel Four Zone Mixer With five input channels and four output zones, the MX524 is our most fully-featured zone mixer. Four channels feature combo inputs for XLR or 1/4” connections, and switchable phantom power for condenser microphones. The fifth channel offers RCA line inputs. All channels have controls for input gain and output level as well as two-band EQ, and can be assigned to any or all of the zones. Each zone has an independent level control, and any combination of zones can be monitored by headphones or the line out terminals. When a signal is detected on the first input, the other channels will automatically lower in volume so that announcements can be clearly heard throughout a venue. Rear terminal connections also allow the connection of an auxiliary telephone signal for paging. Flexible and easy to use, the MX524 is an ideal solution for distributed audio in restaurants, conference rooms, houses of worship, and more. General Features: Five input channels with individual level controls using XLR/Phono jacks with master level, bass and treble controls Balanced Mic/Line XLR inputs for channels one thru four Full +48V low-noise phantom power for channels one thru four mic inputs Front panel 1/8-inch stereo (TRS) mini-phone plug for Headphone monitoring Four sets of Euro Bloc connectors for the Zone outputs Telephone paging function DC power back up Separate monitor outputs LED VU meter on all outputs Rear mount RCA Line inputs for additional audio inputs Rugged 3U rack-mount steel chassis with built-in power supply Perfect for stage, studio and permanent installations Specifications: Inputs XLR / 1/4 Combo Jacks, RCA Outputs Euroblock, Screw terminals Input Impedance Microphone input: 1.4k ΩAll other inputs 10k Ω or greater Output Impedance Zone outputs 120 ΩMonitor Speaker output 8 ΩMonitor Line output 120 Ω Maximum Gain 60 dB CH MIC. Input Main out (XLR, balanced)50 dB CH MIC. Input & REC. out (unbalanced) 60 dB CH MIC. Input Mono out (unbalanced) Frequency Response 20 Hz – 22 kHz (± 2 dBu) Total Harmonic Distortion <0.03% @1 kHz Phantom Power 48 VDC Power Requirements 110~120 VAC 50/60 Hz or 24 VDC Dimensions (HWD) 5.1" x 19" x 7.5" (13.0 cm x 48.3 cm x 19.1 cm) Weight 6.63 lbs. / 3.0 kg Note 0 dBu = 0.775Vrms **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART EQ355 Dual 31-Band Graphic EQ ART 300-Series graphic equalizers are designed for live sound, studio, and installation audio applications to provide intuitive sound shaping, versatile features, and silent operation. The EQ355 is a dual-channel EQ with 31 bands per channel. Each channel has an independently switchable range of 6 or 12 dB, variable high-pass and low-pass filters, master level control, and bypass switch to quickly compare the dry and processed signals. The rear panel has balanced XLR, balanced 1/4 TRS, and unbalanced RCA connectors, so the EQ355 is easy to integrate into any system. It also features a ground lift switch to help eliminate hum. General Features: Dual 31-Band Graphic EQ 20mm Sliders with Centre Detent Switchable 6 dB or 12 dB Range Variable High-Pass and Low-Pass Filters Master Level Controls Balanced XLR and 1/4" TRS Inputs and Outputs Unbalanced RCA Input and Output 2U Rackmount Specifications: Channels 2 Bands per Channel 31 (1/3 Octave, ISO Spacing) Accuracy +/- 3% of Centre Frequency Sliders 20 mm with Centre Detent Range +/- 6 dB or +/- 12 dB Inputs 2x Balanced XLR and 1/4"2x Unbalanced RCA Input Impedance 20 kΩ (Balanced)15 kΩ (Unbalanced) Maximum Input Level +22 dBm (Level Control at Centre) Outputs 2x Balanced XLR and 1/4"2x Unbalanced RCA Output Impedance Level <150Ω (Typical) Frequency Response 20 Hz to 20 kHz (+/- 0.5 dB) Signal to Noise Ratio -94 dB Total Harmonic Distortion 0.01% High-Pass Filter 10 Hz - 250 Hz (12 dB per Octave) Low-Pass Filter 3 kHz - 40 kHz (12 dB per Octave) Overload LED Threshold 6 dB below Clipping (All Filters Flat) Dimensions (HWD) 3.5” x 19” x 78.9 cm x 48.3 cm x 17.8 cm) Weight 9.0 lbs / 4.1 kg **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART EQ351 31-Band Graphic EQ ART 300-Series graphic equalizers are designed for live sound, studio, and installation audio applications to provide intuitive sound shaping, versatile features, and silent operation. The EQ351 is a single-channel 31-band EQ with a switchable range of 6 or 12 dB, for subtle shaping or dramatic sculpting of your sound. The high-pass and low-pass filters can quickly dial in the optimal bass and treble response, and the bypass control lets you compare the dry and processed signals for easy reference. The rear panel has balanced XLR, balanced 1/4 TRS, and unbalanced RCA connectors, so the EQ351 is easy to integrate into any system. It also features a ground lift switch to help eliminate hum. General Features: 31-Band Graphic EQ 20mm Sliders with Centre Detent Switchable 6 dB or 12 dB Range Variable High-Pass and Low-Pass Filters Master Level Controls Balanced XLR and 1/4" TRS Inputs and Outputs Unbalanced RCA Input and Output 1U Rackmount Specifications: Channels 1 Bands per Channel 31 (1/3 Octave, ISO Spacing) Accuracy +/- 3% of Centre Frequency Sliders 20 mm with Centre Detent Range +/- 6 dB or +/- 12 dB Inputs Balanced XLR and 1/4"Unbalanced RCA Input Impedance 20 kΩ (Balanced)15 kΩ (Unbalanced) Maximum Input Level +22 dBm (Level Control at Centre) Outputs Balanced XLR and 1/4"Unbalanced RCA Output Impedance Level <150Ω (Typical) Frequency Response 20 Hz to 20 kHz (+/- 0.5 dB) Signal to Noise Ratio -94 dB Total Harmonic Distortion 0.01% High-Pass Filter 10 Hz - 250 Hz (12 dB per Octave) Low-Pass Filter 3 kHz - 40 kHz (12 dB per Octave) Overload LED Threshold 6 dB below Clipping (All Filters Flat) Dimensions (HWD) 1.75” x 19” x 5.5”4.4cm x 48.3 x 14 cm Weight 4.5 lbs / 2.5 kg **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART EQ341 Dual 15-Band Graphic EQ ART 300-Series graphic equalizers are designed for live sound, studio, and installation audio applications to provide intuitive sound shaping, versatile features, and silent operation. The EQ341 is a dual-channel 15-band EQ. Each channel has an independently switchable range of 6 or 12 dB, master level control, and bypass switch to quickly compare the dry and processed signals. The rear panel has balanced XLR, balanced 1/4” TRS, and unbalanced RCA connectors, so the EQ341 is easy to integrate into any system. It also features a ground lift switch to help eliminate hum. General Features: Dual 15-Band Graphic EQ 20mm Sliders with Centre Detent Switchable 6 dB or 12 dB Range Master Level Controls Balanced XLR and 1/4" TRS Inputs and Outputs Unbalanced RCA Input and Output 1U Rackmount Specifications: Channels 2 Bands per Channel 15 (2/3 Octave, ISO Spacing) Accuracy +/- 3% of Centre Frequency Sliders 20 mm with Centre Detent Range +/- 6 dB or +/- 12 dB Inputs 2x Balanced XLR and 1/4"2x Unbalanced RCA Input Impedance 20 kΩ (Balanced)15 kΩ (Unbalanced) Maximum Input Level +22 dBm (Level Control at Centre) Outputs 2x Balanced XLR and 1/4"2x Unbalanced RCA Output Impedance Level <150Ω (Typical) Frequency Response 20 Hz to 20 kHz (+/- 0.5 dB) Signal to Noise Ratio -94 dB Total Harmonic Distortion 0.01% Channel Separation >50 dB Overload LED Threshold 6 dB below Clipping (All Filters Flat) Dimensions (HWD) 1.75” x 19” x 5.5”4.4cm x 48.3 x 14 cm Weight 4.85 lbs. / 2.2 kg **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART SCL2 2-Channel Compressor / Limiter / Expander / Gate "Despite its wide-ranging controls, I found it pretty difficult to get into trouble with the ART SCL2. Even at its more extreme settings, it still managed to sound controlled and purposeful." - Sound on Sound The SCL2 is a comprehensive dynamics processor in a 1U rackmount format. It offers two channels with VCA compression, limiting, expansion, gating, and sidechain inputs. Dual LED meters indicate gain reduction, output level, and gate threshold. Despite this versatility, a streamlined interface makes it easy to dial in the right settings for any task. Each channel has independent switches for bypass, hard-knee or soft-knee compression, manual or automatic control of attack and release, and to toggle between the expander or gate modes. A global switch changes between dual or linked stereo operation. Designed for live sound, studio, and voiceover applications, the SCL2 is sonically transparent, packed with features, and simple to use. General Features: Dual Mono or Linked Stereo Operation Selectable Hard-Knee or Soft-Knee Compression Selectable Expander / Gate Per Channel Manual or Automatic Attack and Release Sidechain Inputs Gain Reduction and Output Level Meters Specifications: Inputs 1/4" TRS Balanced Outputs 1/4" TRS Balanced Input Impedance 10k Ω Output Impedance 200 Ω (Balanced), 100 Ω (Unbalanced) Maximum Input Level +20 dBu Balanced Maximum Output Level +20 dBu Balanced Frequency Response 10 Hz to 40 kHz, +/- .5 dB Total Harmonic Distortion <0.06% (Typical) Power Requirements 120 V 60 Hz/50H, 10 W Max. Dimensions (DWH) 6" x 19.0" X 1.75" (15.2 cm x 48 cm x 4.5 cm ) Weight 4.2 lbs (1.9 kg) **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART USBMIX6 6 Channel USB Recording Mixer w/Fx The USB Mix 6 is an analog mixer with onboard effects and an integrated digital audio interface. Its designed for home and mobile recording, and is flexible enough for live use with a soloist or small ensemble. The mixer section has six channels. Channels 1 and 2 have combo inputs that can accept mic, line, or instrument signals. Channels 3-4 and 5-6 are grouped in stereo pairs, and all channels have 2 band EQ for tone shaping. Theres also a stereo auxiliary input that can be assigned to the main or monitor bus for additional flexibility. Enhance your mix with one of sixteen selectable effects including reverbs, delays, and modulation. Each channel or stereo pair has an independent FX Send, and the master section has a global FX Return control and FX Mute button. You can record the mixer output over the stereo audio interface, and the USB playback can be routed to the monitor output or to channels 5 and 6. The USB Mix 6 combines the familiar workflow of a traditional mixer, the convenience of a multi-effect processor, and easy digital integration. Its a compact, powerful, and versatile hub for project studios, mobile recording, and small stages. General Features: High Performance Low Noise Design Six Discrete Inputs (2 x Mic / 2 x Stereo Line Level) Switchable +48v Phantom Power (CH1 & CH2) High and Low EQ on Each Input Channel Integrated Stereo Multi-FX with Adjustable Sends & Returns Stereo LED Metering Independent Level Controls for Main and Headphone/Monitor Outputs Integrated Class Compliant Plug-and-Play USB Audio for Mac & PC Specifications: Inputs XLR & 1/4" Balanced Combo Jack (CH 1 & CH2)1/4" TRS Balanced (CH3 & CH4)RCA Unbalanced (CH5 & CH6), RCA Aux Loop In (L & R) Outputs 1/4" TRS Balanced Main Mix Outputs1/4" TRS Stereo Output & Monitor OutputsRCA Loop Out (L & R) Headphones 1/8" Headset Output Maximum Input Level +4 dBu (Mic), +20 dBu (1/4" Input) Maximum Output Level +15 dBu Main Mix Outputs Maximum Gain >54 dB (Mic), >39 dB (Instrument), 10 dB (Stereo Monitor & Line Out) Total Harmonic Distortion <0.02% @ 1 kHz Signal to Noise Ratio >90 dB Typical (Ref 0dBu) Phantom Power Switch selectable, +48 V DC, filtered, current limited Connectivity USB Class Compliant plug-and-play Mac / PC Interface Resolution 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer0.4 ms A/D latency @ 44.1 kHz Power Requirements Via USB or 5VDC @ 500mA Dimensions (HWD) 1.9″ x 7.4″ x 8.5″ (4.7 cm x 18.6 cm x 21.5 cm) Weight 3.24 lbs / 1.47 kg Note 0 dBu = 0.775Vrms **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART USBMIX Mini USB Recording Mixer The USB Mix is a portable analog mixer and class-compliant digital audio interface. Channel 1 features an XLR / 1/4 combo jack that can accept mic, line, or instrument signals. It also has switchable phantom power to work with condenser mics. Channels 2 and 3 are configured as a stereo pair with 1/4 line inputs. You can switch between monitoring only the mixer inputs, or blend them with the audio playback from your recording software. There are stereo outputs for studio monitors, a headphone output with an independent volume control, and a USB 2.0 connection for your computer or mobile device. Easy to set up and use, the USB Mix is a compact and convenient entry point into digital recording, and a convenient bus-powered solution for mobile tracking. Need more channels? Check out the USB Mix 4 and USB Mix 6. General Features: USB powered, no external power supply needed when used with a computer Balanced XLR or unbalanced 1/4-inch Instrument inputs with switchable impedance Switchable low noise +48V phantom power Balanced 1/4-inch TRS inputs for stereo or mono line-level sources 1/4-inch TRS output jacks work with balanced or unbalanced lines Stereo 1/4-inch TRS headphone jack with independent level control for output monitoring Independent controls for both sets of inputs, main output, and headphone monitor Green/Red LED signal/clip indicator Switchable assignment of USB playback to channels 2 and 3 USB 2.0 compliant USB cable, AC adapter, and Audacity recording software included Specifications: Inputs XLR balanced / 1/4″ unbalanced “Combo” jack (ch1 input)1/4″ balanced or unbalanced (Ch2-Ch3 inputs) Outputs 1/4″ TRS balanced (Main Mix outputs)1/4″ TRS stereo (Monitor output) Input Impedance 240k (Inst-HiZ), 20k Ω (Line) (Ch 1, Ch2-Ch3 1/4″ inputs)> 4k Ω (Ch1 XLR input) Output Impedance <1k Ω (balanced 1/4″), <500 Ω (unbalanced 1/4″)100 Ω (Monitor output) Maximum Input Level +4 dBu (XLR input), +14 dBu (1/4″ input) Maximum Output Level +14 dBu (Main Mix Outputs), +13 dBu (Monitor output) Frequency Response 20 Hz – 20 kHz (+0, -1 dB) Total Harmonic Distortion <0.01% @ 1 kHz Equivalent Input Noise -120 dBu typical (XLR balanced, max gain), -100 dBu typical (1/4″) Signal to Noise Ratio > 90 dB typical (Ref 0 dBu) CMRR > 54 dB typical Phantom Power Switch selectable, +48 V DC, filtered, current limited Connectivity USB 2.0 compliant, Windows 7, Vista, XP, 2000, ME, 98SEMac OS 9.1 / OS X computers with native USB support, Linux Resolution 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer0.4 ms A/D latency @ 44.1 kHz Enclosure All steel black finish Power Requirements 5.0V DC @ <500 mA (external) or USB bus powered @ 150 mA typical Dimensions (HWD) 1.6″ x 4.0″ x 4.75″ (4.1 cm x 10.1 cm x 12.1 cm) Weight 1.1 lbs / 0.5 kg Note 0 dBu = 0.775VrmsWeight includes power supply and USB cable **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART TUBEMIX 5-Channel Recording Mixer with USB and Assignable 12AX7 Tube “The Tube Mix falls right in line with ART's ethos of purveying practical gear at attainable, realistic prices, while it offers a fun and ideal solution for home recording, podcasting, DJ work, basic live sound, and more — with the bonus of some vacuum tube mojo!" -Tape Op The Tube Mix is a five-channel mixer with two mic preamps, phantom power, a dedicated High-Z instrument input, VU meters, and an assignable 12AX7 tube gain stage. It’s also a two-channel digital audio interface with an integrated amp simulator. The input channels feature 3-band EQ, stereo aux sends, and controls for level and panning. The master section lets you quickly configure the monitor signal for the control room and headphone outputs, and assign the source and destination for the class-compliant USB interface. With classic sound, modern features, and timeless style, the Tube Mix combines analog and digital elements into an inspiring recording solution that looks as good as it sounds. General Features: Fully Featured Tube Driven Five Channel Stereo USB Mixer Two Wide Dynamic Range Low Noise Mic Preamp Channels Dedicated High Impedance Instrument Input with Amp Simulator Integrated 12AX7 Tube can be Applied to Either Microphone or Instrument Inputs Switchable Low Noise +48V Phantom Power for Condenser Microphones Precise VU Meters and Wide Range LED Meters with Selectable Source Fully Featured Input Channels Flexible Control Room / Monitor Section USB 2.0 compliant. No special drivers needed with most modern versions of Windows, Mac OS, and Linux Specifications: Input Impedance Microphone: 3.5k ΩLine (CH1, CH2, CH3/4), 10k ΩCH5 (Inst.), 1M Ω Output Impedance Main, Control Room (Balanced/Unbalanced), 150/100 ΩAUX Outputs, 150 ΩHeadphones, 100 Ω Maximum Input Level CH1, CH2 (Mic), +9 dBuCH1 CH2 (Line In), + 20dBuCH3/4 (EQ Flat), +20dBuCH5 (EQ Flat), +16 dBuAUX Return, +24 dBu Maximum Output Level Main, Control Room (Balanced, Unbalanced), +20 dBu/+17 dBuAux Send, +20dBuHeadphones, 100 mW / Ch @ 300 Ω, 50 mW /Ch @32 Ω Maximum Gain LINE IN to Main output (balanced), +63 dBCH 5 to Main output (balanced), 56 dBCH3/4 to Main output (balanced), +30 dB Frequency Response 20 Hz - 100 kHz + 1 dB Equivalent Input Noise Microphone (@max gain), 127 dBu “C”wtd.Line (@max gain), -105 dBu “C” wtd.Instrument (@ max gain), -112 dBu “C” wtd. Phantom Power Switch selectable, +48V DC, filtered, current limited Connectivity USB class compliant plug-and-play Mac and PC interface Resolution 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer Power Requirements 18 VAC, 1000mA Dimensions (HWD) 3.3″ x 7.8″ x 10.4″ (8.4 cm x 19.8 cm x 26.5 cm) Weight 5.5 lbs / 2.5 kg Note 0 dBu = 0.775Vrms **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Install Bay IBBTR19 3-Zone Controller with Bluetooth® Wireless Technology This easy-to-install controller with Bluetooth® wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth® technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications. General Features: Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input Control the volume of 3 zones independently LED backlit controller Equipped with Bluetooth® wireless technology Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats 24-bit lossless audio processor Rated IPX7 for powersports & marine applications Switch between Bluetooth® wireless technology & auxiliary inputs Amplifier remote turn-on output (3) 4V 2-channel RCA outputs Frequency range: 18Hz to 25KHz Bluetooth® wireless technology range: 35ft Input voltage: 12V-24V 1-year warranty The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Metra Electronics is under license. Other trademarks and trade names are those of their respective owners. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA MIX600 Ultra Low-Noise 6-Channel Line Mixer Stereo/Single Track Switch Microphone The MR DJ MIX600 mixer is designed to collect and combine audio signals from multiple sources, including guitars, basses, and keyboards, for monitoring or signal routing. Each channel features an independent input connection and individual level control, allowing precise adjustment of each source. All channels are summed into a single output, providing a clean and efficient signal path to the amplifier. The mixer enables multiple channels to be blended into one track, making it an ideal solution for keyboard rigs, small stage setups, drum kits, and submixing applications. Input Level control for each channel. High-quality components and exceptionally rugged construction. Highest quality even at maximum output level. The digital mixer now uses the latest 5V power supply mode, so it no longer limits application scenarios. Material: metal Channel: channel 6 Power supply: DC 5V Versatile and simple controls: The mixer collects sounds from many different sources (guitars, basses, and keyboards) to monitor positions for monitoring or routing Each channel on the line mixer has independent volume controls, independent input plugs, and volume controls for each channel, and a single output from the amplifier Mix multiple channels into a single track, perfect for your keyboard, small stage setup, drum kit, or submix The mini mixer produces good sound quality at all output levels, has ultra-low noise operability, and delivers excellent audio performance Distortion-free and easy to set up, ideal for mixing six line-level signals quickly and without complexity Dimensions: approx. 14.5 x 7.4 x 3.3 cm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.