Pro Audio & DJ Equipment (1987)

Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker+Speaker Stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble 4 application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment gives you the ability to use the stand at several height points, making it usable at any type of venue. This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It is sturdy steel construction and custom carrying case add to the quality and support this stand gives. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy move and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use Center brace connects tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speech, film shows, band practice and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of top pipe: φ35mm The diameter of the main iron pipe: φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron + PP CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble 4 application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Mackie CR4-X Pair 4-Inch Multimedia Monitors with Professional Studio-Quality Sound SOUND AMAZINGCR-X monitors are designed to meet the needs of modern musicians, content creators, video production, and beyond. Stunning looks, studio-quality sound, and convenient features make these the best choice for anyone that wants professional sound without breaking the bank. STUDIO SOUND FOR EVERYONECR Series Creative Reference Multimedia Monitors offer studio-quality sound with cosmetics that complement any desk whether you’re making music, creating content, or just relaxing to your favorite tunes. The sleek design of CR-X features a brushed metal panel and a distinct outline that stands out. Available in a vast range of sizes from 3” to 8” with Bluetooth® option plus an 8” subwoofer with Bluetooth, CR-X has the perfect match for your needs. Upgrade your listening experience with Mackie CR-X Creative Reference Multimedia Monitors. General Features: Desktop monitor speakers with 4" drivers Convenient front-panel volume control and headphone output Includes speaker cable, RCA-1/8" cable, and 1/8"-1/8" cable 4" Polypropylene-Coated Woofer 0.75" Silk Dome Tweeter 50W Amplifier All-Wood Cabinet Custom-Tuned Rear Port Specially Designed Waveguide 1/4" TRS, 3.5mm TRS, and RCA Inputs Front-Panel Stereo Headphone Output Includes Connection Cables Power Configuration: Single Amp LF Driver Size: 4" Woofer LF Driver Type: Polypropylene-coated HF Driver Size: 0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Total Power: 50W Class AB Frequency Response: 70Hz-20kHz (-10dB) Crossover Frequency: 3.0 kHz Maximum Peak SPL: 100 dB SPL Input Types: 1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8" Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height: 8.9" Width: 6.1" Depth: 8.3" Weight: 10.1 lbs. Manufacturer Part Number: 2052118-00 What is in the CR4-X package? Desktop monitor speakers Speaker cable RCA to 1/8" cable 1/8" to 1/8" cable Quick start guide ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump GO 8" Portable Battery-Powered Loudspeaker+Speaker Stand+Thump Go Carry Bag+ Mackie Microphone EM89D Mackie Thump GO 200-Watt 8" 2-way Battery-powered portable loudspeaker Built to make your life easier, Thump GO offers a lightning-fast setup and simple yet powerful sound processing. It also provides flexible inputs, Bluetooth streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. With Thump GO, you can take the performance of the renowned Thump Series anywhere. BATTERY POWERFUL Pair a Bluetooth-enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Intelligent input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is lightweight and heavy-duty for any time of use. The height adjustment allows you to use the stand at several height points, making it usable at any venue. This heavy-duty universal stand can be used as a Speaker or Lighting Stand! Sturdy steel construction and custom carrying case add to this stand's quality and support.  General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy move and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long-term use The Center brace connects the tripod legs design for increased stability  Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe It is ideal for concerts, parties, speeches, film shows, band practice, and so on  Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of top pipe φ35mm The diameter of the main iron pipe is φ38mm  The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron + PP Mackie Thump GO Carry Bag Carry Bag for the Mackie Thump GO 8" Battery-Powered Portable Loudspeaker Nylon Carrying Bag for Your Mackie Thump GO While your Thump GO loudspeaker is durable, Sweetwater recommends extra security in the form of the Thump GO Carry Bag. This rugged nylon bag is perfect for safeguarding your Mackie Thump GO's valuable internal and external components during transport and storage. In other words, this bag is the ideal companion to ensure your Thump GO stays in tip-top shape. Thump Carry Bag Features: Compatible with the Mackie Thump GO 8-inch Battery-powered Portable Loudspeaker Made from durable nylon material for maximum protection indoors and out Great to use when transporting or storing your Thump GO Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple yet powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble Four application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Peavey PVXP15 DSP 15 inch Powered Speaker 980W 15" Powered Speaker with 1.4" Compression Driver +  MR DJ USA XLR6 6' XLR Cable Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Peavey PVXP15 DSP 15 inch Powered Speaker 980W 15" Powered Speaker with 1.4" Compression Driver +  MR DJ USA XLR6 6' XLR Cable & SS350 Speaker Stand Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  (2) PVXP12 DSP 12 inch Powered Speaker 980W 12" Powered Speaker with 1.4" Compression Driver,+ MR DJ USA XLR6 6' XLR Cable & SS350 Speaker Stand Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) PVXP12 DSP 12 inch Powered Speaker 980W 12" Powered Speaker with 1.4" Compression Driver + MR DJ USA 6 Feet XLR Cable Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  2 Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker & Thump Go Carry Bag & MR DJ Speaker Stand  Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble Four application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal. Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 (2) MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment allows you to use the stand at several height points, making it usable at any venue. This heavy-duty universal stand can be used as a Speaker or Lighting Stand! Sturdy steel construction, and custom carrying case add to the quality and support this stand gives. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy moving and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use The Center brace connects the tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speeches, film shows, band practice, and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of the top pipe: φ35mm The diameter of the main iron pipe: is φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron Mackie Thump GO Carry Bag Carry Bag for the Mackie Thump GO 8" Battery-Powered Portable Loudspeaker Nylon Carrying Bag for Your Mackie Thump GO While your Thump GO loudspeaker is durable, Sweetwater recommends extra security in the form of the Thump GO Carry Bag. This rugged nylon bag is perfect for safeguarding your Mackie Thump GO's valuable internal and external components during transport and storage. In other words, this bag is the ideal companion to ensure your Thump GO stays in tip-top shape. Thump GO Carry Bag Features: Compatible with the Mackie Thump GO 8-inch Battery-powered Portable Loudspeaker Made from durable nylon material for maximum protection indoors and out Great to use when transporting or storing your Thump GO ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.