Car Line Drivers (34)

Cerwin Vega CVP2 2-Channel Line-Output Converter Digital Bass Enhancer, Includes Remote Bass Control General Features: Cerwin Vega CVP2 2-Channel Line Output Converter Maximum Speaker Level Input: 400 Watts Per Channel at 4 Ohms Dual Amplifier Outputs Bass Remote Included Level Matching Controls Frequency Response: 10 Hz - 100,000 Hz Signal to Noise Ratio: 110 dB Total Harmonic Distortion: 0.01% Power Draw: 150 MA Selectable Auto On Dimensions: 9"W x 6"D x 3"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Cerwin Vega CVP2 2-Channel Line-Output Converter Digital Bass Enhancer, Includes Remote Bass Control General Features: Cerwin Vega CVP2 2-Channel Line Output Converter Maximum Speaker Level Input: 400 Watts Per Channel at 4 Ohms Dual Amplifier Outputs Bass Remote Included Level Matching Controls Frequency Response: 10 Hz - 100,000 Hz Signal to Noise Ratio: 110 dB Total Harmonic Distortion: 0.01% Power Draw: 150 MA Selectable Auto On Dimensions: 9"W x 6"D x 3"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Cerwin Vega CVP2 2-Channel Line-Output Converter Digital Bass Enhancer, Includes Remote Bass Control General Features: Cerwin Vega CVP2 2-Channel Line Output Converter Maximum Speaker Level Input: 400 Watts Per Channel at 4 Ohms Dual Amplifier Outputs Bass Remote Included Level Matching Controls Frequency Response: 10 Hz - 100,000 Hz Signal to Noise Ratio: 110 dB Total Harmonic Distortion: 0.01% Power Draw: 150 MA Selectable Auto On Dimensions: 9"W x 6"D x 3"H Authorized Internet Dealer 3-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete level controls GTO - Signal sensing inputs 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt pre-amp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What's in the box: Two-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC2i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for add aftermarket amps to a factory system & ACR-1 Dash Remote AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over, and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces. Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features Wired Remote Level Control Mounts on dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control LC7i 6 Channel Line Out Converter with bass restoration adds aftermarket subs and amps to a factory system & ACR-1 Dash Remote The AudioControl LC7i, six channel active line converter, allows all music lovers, who want a great in-car audio experience, to keep their factory-installed source unit and dramatically improve their system performance. The LC7i delivers amazing sound quality and fixes one of the biggest letdowns of today’s factory systems, weak BASS! Designed for maximum sound quality and enhanced audio performance, the LC7i incorporates AccuBASS™. This patented process automatically corrects for the bass roll-off that is common with many factory-installed audio systems and AudioControl’s unique and exclusive AccuBASS™ circuitry maintains and restores the Bass as the volume is turned up, improving the audio performance. The LC7i allows the flexibility of powering the audio signals downstream to single or multiple factory amps maximizing sound quality & achieving high output at a great price. In addition, the LC7i is designed to fit into a compact chassis allowing an easy & flexible factory system upgrade in today’s space constrained vehicles. The ACR-1 dash remote (sold separately) allows the user to control the level of the low-frequency output. Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs GTO (Great Turn-On) Circuit Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.0 lbs Size: 7.5" W x 4.72" D x 1.22" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC7i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 8.5Vrms Output gain: ±15 dB Frequency response: 10Hz - 22,000 Hz Total harmonic distortion: 0.01% Input Impedance: 20 Kohms Output Impedance: 150 ohms Power supply: High headroom PWM switching Power draw: 350mA Recommended fuse rating: 2 Amp Remote Trigger Output Current: 1 Amp What is in the LC7i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC7i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus Legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. It converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect solution to your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6-channel systems at a reduced price. The LC6i accepts speaker-level signals, both crossed-over and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together internally to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers, which offer unlimited system design flexibility different from traditional OEM interfaces. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system & ACR-1 Dash Remote AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over, and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i package: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate LC6i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 package: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete level controls GTO - Signal sensing inputs 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt pre-amp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What's in the box: Two-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC2i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 package: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov