Car Line Drivers (34)

Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin-Vega EQ-770 7-Band Graphic EQ with Parametric E Auxiliary Input Just a heads up, the manufacturer's packaging and manual advertise this product as a parametric EQ. The product itself has a "graphic equalizer" printed on it, so that is what we are going with. EQ-770 is the most powerful equalizer. This device is equipped with several different rich sound output selections. Use the equalizer in the master channel of your audio to match the low end, bass to full sound to your mix Add back brilliant sounds to old digitalized recordings General Features: 7-Band Graphic Equalizer with Auxiliary Input Red illumination Master and subwoofer volume control 3 Sets of up to 7V preamp outputs (front, rear, and subwoofer) Subwoofer frequency and level control Nickel-plated RCA level inputs Nickel-plated screw terminals Built-in fader control Authorized Internet Dealer 1-year Manufacturer's Warranty Product Specifications: Number of Bands: 7 Signal-to-noise ratio: 90dB Frequency response: 10 - 50000Hz Channel separation: 70dB What is in the EQ-770 package: 7-Band Graphic Equalizer Instructions/Specs/Warranty (on packaging) Quality Control Certificate Cerwin Vega EQ-770 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over, and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for add aftermarket amps to a factory system & ACR-1 Dash Remote AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over, and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces. Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features Wired Remote Level Control Mounts on dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

AudioControl Remote ACR-2 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with LCQ-1 The Epicenter® Plus legacy products supported LC7 DQL-8 What is in the box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).s. General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 package: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audiocontrol 3 Pin 3-pin power plug for Audio Control, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Audiocontrol 3 Pin These 3-pin connectors are used on our car and home products. If you’ve lost your connector, or if you like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 3-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States. 3 Pin, 3-pin power plug (Black) for Audio Control, Audiocontrol, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audiocontrol 3 Pin 3-pin power plug for Audio Control, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Audiocontrol 3 Pin These 3-pin connectors are used on our car and home products. If you’ve lost your connector, or if you like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 3-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States. 3 Pin, 3-pin power plug (Black) for Audio Control, Audiocontrol, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC2i Pro 2 Channel Line Out Converter with ACCUBASS w/ Dash Remote General Features: Adjustable 2-channel line out converter Separate level adjustment for each channel Two channels of active speaker level inputs (up to 40V input handling) AccuBASS® processing for correction of bass roll-off ACR-1 dash remote included Load Selection Switch Ground Isolation Switch 400-watt maximum input AccuBASS circuitry restores the bass signal Total Harmonic Distortion: 0.01% Signal to Noise: >110 dB Frequency Response: 20 Hz – 50 kHz ±1 dB Dimensions: 6.9″L x 3″D x 1″H (including speaker connectors) Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: AudioControl LC2i PRO owner's manual Two-Channel line output converter Two 4-pin captive-screw connectors (installed) ACR-1 Level control 16.5' Level-control cable (RJ-14) Quickstart guide (on cardboard label) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov