Car Line Drivers (40)

Rockford Fosgate DSR1 8-Channel Digital Signal Processor Rockford Fosgate DSR1 Digital signal processor with Maestro AR amp replacement module add an aftermarket amp without losing important features Upgrade your system Your car computer controls its audio system, so upgrading the sound has to include integrating with your car's digital network. Rockford Fosgate's DSR1 combines an integration module with a full-featured digital signal processor so you can add an aftermarket amplifier without losing any of your factory controls or audio notifications, and achieve the high-fidelity sound the system lacked. A simpler way In the past, in order to upgrade a factory system you'd have to first sum all the outputs, reduce the signal strength to line-level, remove the factory EQ and crossover settings, and then apply your custom audio processing and amplification. The DSR-1 simplifies this process by using the unprocessed line-level signals from the factory receiver, so you can tune the sound without fighting the factory settings. Your factory radio still works like it always has, and you retain all your vehicle's features. Rockford Fosgate + iDatalink Maestro = good times The DSR1 includes an iDatalink Maestro AR amplifier replacement module, which can use a vehicle-specific T-harness (sold separately) to supply a clean audio signal plus digital control data to the processor. Using a Windows PC, you go to iDatalink's website and download the firmware for your specific vehicle to your DSR1. It will then be able to translate your vehicle's digital instructions, like turning down the music and making only one speaker active during Bluetooth calls, for example. Fine-tune your sound via your mobile device The DSR1 uses the same technology as Rockford Fosgate's 3Sixty.3 digital signal processor to help you obtain and enjoy amazing sound quality from your vehicle's sound system. After connecting — via Bluetooth to an iOS or Android device — and loading the PerfectTune app, the main user interface screen displays your speaker configuration, an EQ graph, the EQ controls, and more. 8 channels handles almost any system Each channel has its own crossover network, level adjustment, time alignment setting, polarity switch, and 31 bands of equalization, so there's no excuse for anything but perfect sound. The DSR1 offers eight output channels of processed signal for your amplifiers to send on to your tweeters, speakers, and subs.Note: The DSR1 bypasses all factory amplification — compatible aftermarket amplifiers required.Important Note: This Rockford Fosgate processor can either be used with an iDatalink harness in "Vehicle-specific" mode, or it can operate without needing a vehicle-specific harness in "Universal" mode, when upgrading a standard, non-premium factory or aftermarket system. See "Configuration Menu" under the Details tab for more information. Product highlights: digital signal processor with factory digital amplifier replacement module add an aftermarket amplifier without losing any factory controls or audio notifications requires Windows PC with internet connection to download vehicle-specific firmware to the module includes iDatalink Maestro AR interface to retain factory premium audio features works with an optional vehicle-specific T-harness (sold separately) supplies control data as well as audio preamp and speaker-level inputs for use with a non-premium system and no vehicle-specific harness Digital Processing: digital processing technology from Rockford Fosgate's 3Sixty.3 processor digital processing: 147 MIPS speed, 32-bit precision, 72-bit accumulators analog to digital: 24-bit precision, 105 dB dynamic range, -98 dB THD+N digital to analog: 24-bit precision, 108 dB dynamic range, -98 dB THD+N settings and adjustments made via Bluetooth connection to a iOS or Android device running PerfectTune app 8 assignable inputs 4 auxiliary RCA and 1 optical TOSLINK (S/PDIF) inputs 8 preamp outputs (up to 4 volts) 31-band parametric EQ on all channels crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters selectable slopes and filter characteristics phase switch on every channel dimensions: 5-1/16"W x 1-1/4"H x 4"W warranty: 1 year Digital signal processor 7" microUSB-to-USB cable 18-pin input harness 16-pin output harness Quick-start guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound. What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate RFPEQU Universal Punch Equalization Control & Line Driver General Features: 2-channel universal Punch EQ Built-in line driver provides a bass boost to any aftermarket audio system High voltage line driver allows for up to 10 volts of RMS output Built-in Punch EQ2 equalizer Independent gain control Auto-Sense turn-on with remote out (high level in) 2-channel (left/right) high-level signal input 2 RCA (left/right) low-level output Low distortion and low noise operation Speaker level to RCA line level converter PEQ remote included Discreet surface mount technology Easily mounts behind the dash Operating Voltage: 9-16 VDC @ 200 mA Frequency Response: 20-20,000 Hz Input Impedance: 20,000 ohms Output Impedance: 500 ohms Input Voltage: 650mV-10V RMS Output Voltage: 10V RMS THD+N: .005% Signal to Noise Ratio: >100dB @ 2V (CEA) >110dB @ 10V (Max Output) EQ Frequency Controls: Up to +18dB @ 45 Hz Up to +12dB @ 12,500 Hz Fuse Size: 1 amp It is recommended to install as close to the source unit as possible Dimensions: 4.72"W x 3.15"D x 1.1"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the RFPEQU package: Rockford Fosgate RFPEQU owner's manual Rockford Punch EQ wired remote Hideaway universal PEQ module 16.5' remote cable with RJ-45 connectors on both ends 12" Power harness 12" Signal input harness LED with attached 8" power/ground harness Additional remote front panel Mounting bracket Installation instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio LOC22 2-Channel (2 IN / 2 OUT) Line-Output Converter Diamond Audio’s line output converters are your integration ticket for a great sounding audio system. Not only do these provide tremendous output voltage, they provide you with an assortment of various output controls. The load select feature provides flexible compatibility and prevents unwanted system noise. The LOC series line output converters are available as a 2-channel or 4-channel model. General Features  2-Channel (2 IN / 2 OUT) Line-Output Converter Ideal Interface for Adding an Aftermarket Amplifier Single Dial, Precision Matched, Stereo & Level Gain Adjustment Up to 40 Volts RMS High-Level Input Sensitivity Up to 9.5 Volts RMS Low-level RCA Output Selectable 20Ω / 60Ω / 20KΩ Load Input Impedance Selectable GND / ISO / 200Ω Ground Isolation Bass Boost: 0-12dB Dimensions: 4.53" x 3.86" x 0.94" / 115.1 x 98 x 24 mm Removable Quick Connect with Screw Type Terminal ⚠️Warning This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.