Universal Audio UA-ORION-ECHO-U Orion Tape Echo Pedal
$189.99
Universal Audio UA-ORION-ECHO-U Orion Tape Echo Pedal
Emerging from Universal Audio's flagship Starlight Echo Station, the UAFX Orion Tape Echo puts authentic EP-III-style effects right under your foot. This guitar effects pedal not only gives you a glorious cache of magical delay effects, but it also exquisitely captures the original hardware's analog preamp for beautifully fat, boosted tones. You get three tape modes, arming you with a trio of distinctive sonic colors, along with a Wonk control for modulated repeats and wow-and-flutter artifacts. Integrating the Orion Tape Echo with the rest of your guitar rig is a breeze, thanks to selectable true or trails bypass switching, switchable preamp emulation, and analog dry-through. Few things are as ear-grabbing as a '70s-style tape echo, and the Universal Audio UAFX Orion Tape Echo packs the sound of one of the most iconic vintage tape delays ever built into a classy, pedalboard-friendly stompbox.
Three tape modes
With the UAFX Orion Tape Echo, you're not limited to one sound. Thanks to its 3-way Tape switch, you can access a useful array of textures and sonic colors. Mint mode yields the sound of a brand-new unit with pristine, never-before-used analog tape. Worn mode elicits the sound of a machine that's been around the block a time or two but is still in perfect working condition. Finally, Old mode simulates the sound of a battered, road-worn unit chock-full of ear-pleasing character. Want even more analog mojo? Give the Wonk knob a twist for everything from subtly modulated repeats to funky tape-splice textures.
Spot-on preamp emulation
One of the coolest components of a '70s-style tape echo machine is its built-in solid-state preamp. So much so that many guitarists park one of these units in front of their amp for the added boost and punch. For them, the echo is merely icing on the cake! The Universal Audio UAFX Orion Tape Echo offers a faithful emulation of the original hardware's preamp, activated by a dedicated switch, giving you easy access to all the grit and attitude you can handle.
Integrates with any guitar rig
The guitarists love how easy it is to integrate the UAFX Orion Tape Echo into any setup. Its selectable true or trails bypass switching allows you to either completely maintain your original tone when the pedal isn't in use or let your delay trails die off naturally when you bypass the pedal. You also get a preamp on/off switch and an analog dry-through control, enabling the Orion Tape Echo to play nicely in any guitar rig configuration.
General Features:
Packs authentic EP-III tape-echo-style FX into a convenient stompbox
3-way Tape switch with Mint, Worn, and Old modes
Wonk knob gives rise to modulated repeats and wow-and-flutter artifacts
Emulates the sound of the original hardware's built-in solid-state preamp
Selectable true or trails bypass switching to retain your delay trails when you bypass the pedal
Preamp on/off switch shuts off the preamp emulation but leaves the echoes active
Analog dry-through control makes integration with any guitar rig easy
USB-C port makes system updates a breeze
Tech Specs:
Pedal Type: Echo
Analog/Digital: Digital
Effects: Tape Machine Delays: Mint, Worn, Old
Max Delay Time: 700ms
Inputs: 1 x 1/4"
Outputs: 1 x 1/4"
USB: 1 x USB-C (updates)
True Bypass: Yes, switchable to Trails mode
Software: UAFX Control App
Power Source: 9V DC (250mA) power supply (sold separately)
Height: 2.29"
Width: 2.58"
Depth: 4.75"
Weight: 0.65 lbs.
Manufacturer Part Number: GPS-ORN
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Universal Audio UA-EVERMORE-U Evermore Studio Reverb Guitar Effects Pedal
$189.99
Universal Audio UA-EVERMORE-U Evermore Studio Reverb Guitar Effects Pedal
Boasting three studio-grade reverb algorithms from Universal Audio’s Golden Reverberator pedal, the Evermore Studio Reverb pedal provides a masterclass in studio-style digital echo. Evermore sports three voices to swap between — Room, Small Hall, and Large Hall — all inspired by the textured trails and moody modulation of an all-time great 1980s digital reverb unit. What’s more, Evermore comes complete with a positively compact and pedalboard-friendly enclosure, along with an array of straightforward controls, including a 3-band EQ, modulation knob, and Mix control. Lastly, it’s all topped off (quite literally) with two top-mounted switches for control over your signal’s pre-delay and whether the pedal operates in Trails mode or Bypass mode.
Algorithms inspired by UA’s Golden Reverberator
Evermore’s trio of studio-style digital reverb algorithms are based on a perennial reverb pedal favorite: Universal Audio’s Golden Reverberator. However, the Golden Reverberator’s slick digital reverb sounds are, in turn, inspired by a legendary studio reverb device from the late 1970s. That’s all well and good, but what do these algorithms sound like? Evermore unlocks a myriad of slick, glossy, and studio-ready digital reverb sounds, from the short-reflection snap of Room mode to the long, lush trails of Small Hall and Large Hall. It’s a pedal that genuinely encapsulates the vibe of early-era digital studio gear, supplying you with a vast wash of textured trails to transform your tone!
Switch up your sound
Flip over to the front side of your Evermore pedal to be greeted by two additional control features to tweak your tone: Trails/True and Predelay. First up, the Trails/True switch allows you to configure your Evermore to either completely cut the reverb trail when you bypass the pedal (True mode) or let the trail continue to decay (Trails mode). Next, if you’re after just a bit more control over Evermore’s initial attack, the Predelay switch offers both long and short settings.
The power of the studio on your pedalboard
Universal Audio’s legacy lies in the studio, and that fact often shines through their pedals’ predilection for diverse and complex sonic sculpting possibilities. Frankly, few pedals can match the sheer depth of UAFX designs, but sometimes a slightly more straightforward design can be preferable. Universal Audio’s scaled-down UAFX pedals pack the same studio-grade sound as their bigger brothers — often with the same algorithms — but with an intuitive knob-per-function design that’s just at home on the stage as it is in the studio.
General Features:
A trio of studio-style digital reverb algorithms inspired by Universal Audio’s Golden Reverberator pedal
Room, Small Hall, and Large Hall digital reverb voices, modeled after a legendary earl-era digital reverb unit from the late 1970s
Full 3-band EQ to shape your sound
Modulation knob imparts a sense of movement and mood to your reverb trails
Predelay switch to fine-tune the initial attack of your reverb
Bypass switch allows you to swap between trails mode and true bypass
Tech Specs:
Pedal Type: Reverb
Analog/Digital: Digital
Effects: Room, Small Hall, Large Hall
Inputs: 1 x 1/4"
Outputs: 1 x 1/4"
USB: 1 x USB-C (updates)
True Bypass: Yes, switchable to Trails mode
Software: UAFX Control App
Power Source: 9V DC (250mA) power supply (sold separately)
Height: 2.29"
Width: 2.58"
Depth: 4.75"
Weight: 0.65 lbs.
Manufacturer Part Number: GPS-EVMR
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Universal Audio UA-1176-COMP-U Studio Compressor Pedal
$189.99
Universal Audio UA-1176-COMP-U Studio Compressor Pedal
The Universal Audio UAFX 1176 Studio Compressor leverages the company's industry-leading emulation technology to pack the sound of the illustrious 1176LN Limiting Amplifier into a compact stompbox. You'll benefit from three modes of classic guitar compression effects with familiar 1176-style Input, Output, Attack, and Release controls. You also get a Ratio knob, which includes the world-famous "all buttons in" mode, supplying you with the gritty, hyper-compressed textures pro engineers have relied on for decades. The 1176 Studio Compressor also includes a parallel compression mode and selectable true- or buffered-bypass switching. Whether you want to inject some punch into your clean tones, infuse your lead work with FET-fueled sustain, or add a studio-quality sheen to your guitar rig, the UAFX 1176 Studio Compressor is destined to become a staple on pedalboards everywhere.
Familiar 1176-style controls
Those who have used a rackmount 1176LN will find operating the UAFX 1176 Studio Compressor is like meeting up with an old friend. Just like its studio hardware predecessor, this guitar effects pedal includes Input and Output knobs for dialing in your gain reduction and output levels, plus easy-to-use Attack and Release knobs. The 1176 Studio Compressor's Ratio knob ranges from Off all the way through All — a.k.a. "all buttons in" — for those occasions when a full-blown nuke is desired.
One pedal, three modes
The Universal Audio UAFX 1176 Studio Compressor gives you three flexible modes. Single mode is perfect for giving your signal a subtle squeeze, much like running your guitar into a single 1176LN hardware unit. Dual mode replicates running your signal into two units wired in parallel for a thunderous compressed crunch. Lastly, Sustain mode will give your solos that "special something" that always seems untouchable for anyone outside a professional studio. The guitarists are blown away by how perfectly the 1176 Studio Compressor replicates the iconic tones and effects we've been chasing. Best of all, you can put it right on your pedalboard — no studio rack required.
Indispensable extra features
Universal Audio designed the UAFX 1176 Studio Compressor so that you can integrate it effortlessly into any guitar rig. Its parallel compression mode functions as a wet/dry control. You also get selectable true- or buffered-bypass switching, allowing you to put it in front of anything, such as a fuzz pedal, whether it likes buffers or not.
General Features:
Packs a spot-on emulation of the venerable 1176LN Limiting Amplifier into a convenient stompbox
3 compression modes for versatile sound-sculpting possibilities
Familiar 1176-style Input, Output, Attack, and Release controls
Ratio knob includes an "all buttons in" mode for gritty, hyper-compressed textures
Parallel compression mode functions as a wet/dry control
Selectable true- or buffered-bypass switching ensures easy rig integration
USB-C port makes system updates a breeze
Tech Specs:
Pedal Type: Compressor
Analog/Digital: Digital
Inputs: 1 x 1/4" TS
Outputs: 1 x 1/4" TS
USB: 1 x USB-C (updates)
True Bypass: Yes, Switchable to Buffer Mode
Features: UAFX Control App
Power Source: 9V DC (250mA) power supply (sold separately)
Height: 2.29"
Width: 2.58"
Depth: 4.75"
Weight: 0.65 lbs.
Manufacturer Part Number: GPS-1176
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey Trace Elliot® Transformer DI Pedal
$229.99
Peavey Trace Elliot® Transformer DI Pedal
When you need to convert between balanced and unbalanced signals to connect your gear, the Trace Elliot Transformer DI does so with 1-to-1 audiophile quality. Equipped with a perfectly balanced proprietary transformer design, the Transformer DI solves the balanced/unbalanced conversion challenge with total transparency. Never lose your low B – full clarity down to 14Hz means nothing you play gets lost.
When you need to convert between balanced and unbalanced signals to connect your gear, the Trace Elliot® Transformer DI does so with 1-to-1 audiophile quality. Equipped with a perfectly balanced proprietary transformer design, the Transformer DI solves the balanced/unbalanced conversion challenge with total transparency. Never lose your low B – full clarity down to 14Hz means nothing you play gets lost.
General Features:• General purpose audiophile quality 1:1 line level audio transformer interface.• Transforms balanced to unbalanced line signals or unbalanced to balanced line signals.• Perfectly balanced proprietary transformer design with ultra-high permeability Ni-Fe core.• Frequency Response of 20Hz to 20kHz (-0.5dB) with no more than +/-1.0dB of variation from 14Hz to 80kHz.• Total Harmonic Distortion is <0.015% from 70Hz to 80kHz.• Total Harmonic Distortion is 0.5% at 20Hz.• Electrical isolation of >500V between secondary and primary winding or windings.• Insertion loss <1.0dB.• Input levels up to +22.2dBu are acceptable.• Ground lift with RF rejection circuitry.• Excellent for low to mid impedance signal sources.• Never lose your low B – full clarity down to 14Hz means nothing you play gets lost.• Item Number: 3620100
Professional Signal Conversion
Convert instrument and line-level signals between balanced and unbalanced with complete 1:1 transparency.
Audiophile Quality
Perfectly balanced proprietary transformer design with ultra-high permeability Ni-Fe core for true sonic transparency.
Solution for Stage and Studio
Transforms balanced to unbalanced line signals or unbalanced to balanced line signals.
For Bass, Acoustic and More
Accepts instrument and line-level signals up to +22.2dBu.
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey Trace Elliot® Clarity Acoustic Pedal
$199.99
Peavey Trace Elliot® Clarity Acoustic Pedal
The Trace Acoustic Clarity is a frequency-expansion effects pedal that unlocks a new level of harmonic richness to your favorite acoustic-electric instrument. Dual filters allow you to enhance the harmonic undertones at the extreme ends of the spectrum, enhancing your natural acoustic tone with exceptionally musical harmonic content.
General Features:
True bypass operation
Bipolar 18V internal supply from standard 9VDC supply or battery
Frequency expansion effect for most acoustic-electric instruments
Enhances musical frequencies that exist naturally in the extreme ends of the frequency spectrum
For use with any PA system, instrument amplifier, or signal processor/pedalboard setup
Item Number: 3620000
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey Rockmaster Pedal Preamp Pedal
$199.99
Peavey Rockmaster Pedal Preamp Pedal
General Features:
TransTube® recreation of the groundbreaking Peavey Rock Master® “Ultra” channel circuit (circa 1990) in a pedal
Internal HV TransTube® supply from standard 9V supply/battery
Hard Bypass switch with anti-click circuit
Pre and Post Gain controls
Gain and Mid Shift switches
Three-band active Bottom, Body, & Edge EQ
Tested and formally approved for worldwide EMC and FCC compliance by an independent laboratory
Item Number: 3621640
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey VTM Pedal Preamp Pedal
$199.99
Peavey VTM Pedal Preamp Pedal
General Features:
TransTube® recreation of the legendary Peavey VTM™ 60/120 preamp circuit (circa 1987) in a pedal
Internal HV TransTube® supply from standard 9V supply/battery
Hard Bypass switch with anti-click circuit
Pre and Post Gain controls
8-position DIP switch for Custom Response Modifications
Three-band passive EQ
Tested and formally approved for worldwide EMC and FCC compliance by an independent laboratory
Item Number: 3621900
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey Decade Pedal (New)* Preamp Effects Pedal
$199.99
Peavey Decade Pedal (New)* Preamp Effects Pedal
The original Decade™ amplifier is a not-so-hidden secret for raw, tenacious tone — and the Decade™ Pedal packs it into an amp-in-a-box for your pedalboard.
Originally released in the early '80s, the Peavey Decade™ amplifier gained a cult following for its raw, gritty tone, quietly becoming a go-to for players chasing unconventional edge and saturation. Now, as Peavey brings the legendary amp back to life, its unmistakable voice also returns in compact pedal form with the Decade™ Preamp.
A faithful recreation of the original 1980 circuit, the Decade Preamp Pedal captures the full character of the amp that started it all. Its switchable Saturation mode acts like a second channel, delivering rich harmonic overdrive at the flip of a switch. Pre and Post Gain controls, a responsive three-band EQ, and a hard bypass switch with anti-click circuitry ensure clean integration into any signal chain. Powered by a standard 9V supply, the pedal internally boosts to 24V, delivering the headroom and dynamic range that defined the original.
The Decade Preamp belongs to the Peavey Legacy Preamp Series, which features miniaturizations of iconic Peavey amplifiers that have become highly sought after in recent years. While others have tried to capture these tones, only Peavey can deliver the genuine article. Each pedal is built with premium components inside a rugged die-cast enclosure, from the high-quality pots and switches to the fiberglass PCBs with 2-ounce copper and plated-through holes. Every control and cosmetic detail reflects the original amps, while the sounds stay true to their legendary tone... without the weight. With output levels adjustable for both instrument and line-level applications, the Decade Preamp is as flexible as it is faithful.
Rooted in history, built for now, the Decade Preamp carries the same spirit of innovation that defined the original, reborn for a new generation of players.
General Features:
Faithful recreation of the original Peavey Decade™ circuit (circa 1980) in a pedal
Switchable Saturation “channel” function
Internal 24V supply from standard 9V supply/battery
Hard Bypass switch with anti-click circuit
Pre and Post Gain controls
Three-band EQ
Tested and formally approved for worldwide EMC and FCC compliance by an independent laboratory
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Peavey Bandit Supreme Teal Stripe Pedal Preamp Pedal
$199.99
Peavey Bandit Supreme Teal Stripe Pedal Preamp Pedal
The Bandit Supreme pedal packs the legendary raw sound of the 2nd-gen Peavey Bandit 112/Supreme 160 “Teal Stripe” lead channel into a rugged amp-in-a-box for your pedalboard.
Authentic Bandit Tone
It’s an exact re-creation of the lead channel circuit found in the prized Bandit 112 (circa 1990) and the Supreme 160 “Teal Stripe” amplifiers.
Explosive Gain Range
With Pre and Post gain controls, a gain boost switch, and a mid-shift switch, you can dial in everything from crispy crunch to oversaturated distortion.
EQ to the Extreme
Controls for Bottom, Body, and Edge offer up to 15dB of boost or cut, giving you the power to shape your sound however you want.
Internal 18V Power
Enjoy responsive dynamics and ultra-low noise with the Bandit Supreme’s internal bipolar 18V power supply.
Specifications:
Hard Bypass Switch:Hard Bypass with anti-click circuit for silent switching
Mid-shift Switch: Switches between full-bodied mids and scooped '80s thrash metal tone
Gain Controls: Pre- and post-gain control plus gain switch for extreme gain potential
Current Draw: 9VDC = 50mADC
Item Number:036216303621630Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mackie ShowBox Battery-Powered All-in-One Live Performance Two-Button Footswitch
$49.99
$79.99
Mackie ShowBox 2-button FootswitchFootswitch for Mackie ShowBox Speaker System with 2 Buttons and TRS Cable
General Features:
Unlocks greater functionality for your Mackie ShowBox battery-powered speaker system
Plugs directly into the rear-mounted 6-channel mixer
Compact dual footswitch design saves space at your feet
Includes a 1/4-inch TRS cable
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hosa FSC-501 Latching Footswitch
$43.95
$65.92
Hosa FSC-501 Latching Footswitch
FSC-500 series footswitches by Hosa Technology are incredible values. With all-metal chassis and reinforced switches, all footswitch models are designed to withstand years of use. A hardwired 10 ft cord facilitates a broad range placement and rubber pads on both top and bottom prevent it from slipping. Available footswitch models include:
FSC-501: Latching (on-off) Footswitches, designed for guitar amp channel switching and other electronic applications
FSC-502: Momentary Footswitches, normally open (push-to-make), compatible with most electronic instruments and multitrack recorders
FSC-503: Momentary Footswitches, normally closed (push-to-break), compatible with Roland and Yamaha electronic instruments and multitrack recorders
A latching footswitch is designed for guitar amp channel switching, signal processor on-off, and similar electronic device functions. A momentary footswitch is designed to control keyboard/synthesizer sustain and patch advance, drum machine/sequencer start/stop, and multitrack recorder punch in/out.
Consult your owner’s manual to ensure compatibility.
Connector: 1/4 in TS
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hosa FSC-502 Momentary Footswitch Normally Open
$43.95
$65.92
Hosa FSC-502 Momentary Footswitch - Normally Open
FSC-500 series footswitches by Hosa Technology are incredible values. With all-metal chassis and reinforced switches, all footswitch models are designed to withstand years of use. A hardwired 10 ft cord facilitates a broad range placement and rubber pads on both top and bottom prevent it from slipping. Available footswitch models include:
FSC-501: Latching (on-off) Footswitches, designed for guitar amp channel switching and other electronic applications
FSC-502: Momentary Footswitches, normally open (push-to-make), compatible with most electronic instruments and multitrack recorders
FSC-503: Momentary Footswitches, normally closed (push-to-break), compatible with Roland and Yamaha electronic instruments and multitrack recorders
A latching footswitch is designed for guitar amp channel switching, signal processor on-off, and similar electronic device functions. A momentary footswitch is designed to control keyboard/synthesizer sustain and patch advance, drum machine/sequencer start/stop, and multitrack recorder punch in/out.
Consult your owner’s manual to ensure compatibility.
Connector: 1/4 in TS
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.