Guitar Pedals & Effects (33)

On-Stage PS801 Pedal Power Pack Enjoy streamlined pedal power and a tidy pedalboard with our PS801 Pedal Power Pack. This 9-volt power adapter uses only one electrical outlet and a daisy chain to power eight effect pedals at once-no need for individual adapters or cables. Converter plugs are included to enable compatibility with the majority of pedals that use 9-volt power, including Line 6 modeling pedals. General Features: 1500 mA adapter powers up to eight pedals-no need for multiple power supplies Heavy-duty output cable withstands frequent use and coiling Included multi-plug cable delivers power to eight pedals for tidy cable management Included converters adapter plugs to fit a wide range of 9 V effects including Line 6 modeling pedals Note: Included 9V battery connectors can be used to power pedals with a 9V battery in situations where power sources are limited. These should not be used to power vintage pedals that require a 9V battery Product Properties: 9V Battery Connectors Used to power pedals with 9V battery in situations where power sources are limited. Not for use to connect to internal battery connector in pedals AC Adapter Input AC100-240V~50/60Hz, Max: 0.6A AC Adapter Output DC 9V/1500mA (positive out, negative in) Application Powers up to 8 effect pedals Color Black Includes Adapter, 8-plug daisy chain, (2) 9V battery connectors, (1) Line 6 connector, (1) 3.5mm connector, (1) reverse polarity connector Plug Size 5.5/2.1mm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

On-Stage GPB-DLX Deluxe Pedalboard The GPB-DLX Deluxe Pedalboard provides a secure foundation for pedals and enables users to easily store and transport an entire effect chain as a single portable unit. The main platform and upper tier are angled toward the user for comfortable viewing and ease of operating the foot switches. While pedals vary in size, this two-tiered board has plenty of room for up to 11 standard-sized (1590B enclosure) pedals. The upper tier, which holds three standard-sized pedals, can be removed entirely, or positioned on the left, on the right, or in the center of the main platform to fit the user’s preferred pedal arrangement. An added benefit of the upper tier is that a power supply, buffer, or other utility device can be mounted below it without taking up precious pedal space. With the upper tier oriented left or right, the main platform accommodates volume and wah pedals. Slot cutouts make it easy to neatly and efficiently route patch cables and power cords below the surface and out of the way for an organized setup. Constructed of steel, this pedalboard delivers reliable support for your equipment and resists flexing. Nonslip rubber feet prevent slides and skids to keep the setup safely in place. Adhesive hook-and-loop strips are included to prepare the platform and pedals for proper mounting. Quickly attaching pedals using magnets (sold elsewhere) is also possible. For ease of storage and transportation, a protective padded gig bag is included that features a zipper closure, a top handle, and a removable adjustable shoulder strap. General Features: Keeps your effect chain organized, connected, and easy to transport Enables you to configure the board to fit your preferred pedal layout Makes it easy and comfortable to use your pedals’ foot switches Accommodates your volume- and wah-sized pedals Provides space for three of your standard-sized pedals on the upper tier Allows you to mount your power supply or utility device under your pedals to maximize space Facilitates routing and management of your cables Delivers reliable support and stability for your equipment Prevents slides and skids to keep your gear safely in place Product Properties: Color Black Construction Steel Gig Bag Interior Dimensions 21" (L) x 13" (W) x 5.5" (H) Includes Gig bag and adhesive hook & loop strips Main Platform Dimensions 20" (L) x 12" (W) Upper Tier Dimensions 10.5" (L) x 5" (W) Weight 6.5 lb Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-WOODROW-U Woodrow '55 Instrument Amplifier Pedal Universal Audio’s Woodrow ’55 perfectly captures the warm tube-style breakup tones of the king of ’50s tweed amplifiers! This pedal is an authentic end-to-end emulation of the classic ’50s 1 x 12-inch combo, sporting three different boost types to push the Woodrow ’55 into that throaty growl that defined rock ‘n’ roll overdrive tone for decades. Guitarists are amazed at how closely the Woodrow ’55 re-creates the sound of a hot tube amp recorded in a live room, and this lifelike quality comes courtesy of UA’s incredible mic, cab, and Dynamic Room Modeling technology. What's more, each pedal in the UAFX series allows you to bypass your amplifier's preamp when the pedal is engaged via the special "4-cable" mode, supercharging your amp with two additional channels. If you’re looking for even greater control, the Woodrow ’55 sports Bluetooth and MIDI compatibility so you can connect to Universal Audio’s UAFX app for enhanced editing, expanded control, access to artist presets, and more! A trio of distinct amp styles Woodrow ’55 comes loaded with three different boosts to push your sound into overdrive — from a raunchy ’50s-style wail to more modern, articulate tones. Stock: In this mode, the boost is pure clean gain without any added distortion. When you start cranking the knob, the midrange and treble response kick in, with a reduced bass to prevent flubbing.KP-3K: If you’re after clarity and high-end detail, this one’s for you! This boost brightens up your tone by borrowing the preamp design from a famous ’80s digital delay pedal.EP-III: Thick, saturated, and warm — how does that sound? The EP-III boost is based on the tape echo of the same name, with plenty of gain and color on tap to add a delightfully vintage character to your tone. Switch up your speakers Part of the Woodrow ’55’s magic is found in the dead-on speaker/cab emulations, bolstered by Universal Audio’s Dynamic Room Modeling technology. The Woodrow ’55 comes loaded with three cab/mic/speaker settings, seamlessly matched to the three different amplifier modes. Guitarists looking to cover a wide sonic range will love experimenting with the different speaker and amp pairings; plus, when registering the Woodrow ’55 with Universal Audio, you get three more free cab sims to play with! 4-cable mode offers powerful channel switching Each pedal in Universal Audio’s UAFX series features a special “4-cable” mode accessible via the UAFX Control app, allowing you to bypass your amp’s preamp when the pedal is engaged for incredibly realistic tube-style tones. By hooking your pedal up to both your effects loop send/return and the front of amp input, you can instantly switch between your amp’s stock tone and your UAFX pedal routed straight into the power amp, effectively adding two extra channels to your amplifier. What’s more, Universal Audio designed this feature with multiple pedal setups in mind — you can connect any number of UAFX pedals in this configuration for multi-channel madness! Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Woodrow '55 boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app, new footswitch modes for intelligent preset switching, and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, explore Live, Tour, and A/B-C/D footswitch performance modes, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: Authentic end-to-end replication of one of the most iconic 1 x 12-inch tweed combo amplifiers of the '50s 3 distinct boost options to bolster your base tweed tone 3 separate speaker/cab/mic options for a wide range of different tonal flavors 3 bonus cabs are provided when registering the Woodrow '55 Room knob adds some air and ambiance to your signal 4-cable mode bypasses your amplifier's preamp when the pedal is engaged, giving you 2 more channels to play with USB-C port for firmware updates Bluetooth compatible for access to Universal Audio’s UAFX app Save and access presets using the right footswitch USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Amp Emulation, Boost Analog/Digital:    Digital Form Factor:    Pedal EQ:    Tone Control Presets:    1 x Onboard Amp Modeling:    3 x Speaker models, 3 x Cabinet emulations Distortion/Overdrive:    3 x Boost Circuits Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C (firmware updates) Bypass Switching:    Buffered Software:    UAFX Control mobile app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Features:    Mono/Stereo, 4-cable mode, Bluetooth v5.0 Power Source:    9V DC (400mA) power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-WDR Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-STARLIGHT-U UAFX Starlight Echo Station Delay Pedal Universal Audio runs the game when it comes to spot-on emulations of classic studio hardware and effects, all powered by their cutting-edge DSP. Now, they’ve taken those effects to the stage with a killer line of guitar pedals packed with emulations of some of the most desirable delays of all time. The Universal Audio Starlight Echo Station is a delay lover’s Holy Grail, loaded with two stunning re-creations of legendary echo units and a pristine custom-designed digital delay in a single, ultra-robust chassis. From the crunchy repeats of the Tape EP-III and the dark, brooding modulated bucket brigade echoes of the Analog DDM to the crystalline chime of the Precision delay, the Starlight Echo Station is the ultimate foil for shoegazers, psych-rockers, and experimentalists. USB MIDI compatibility expands your control even further, with additional presets and BPM clock sync. Plus, with enhanced features such as stereo and dual-mono operation, true bypass with silent switching, and a preset mode for switching between two delay types while preserving your echo tails, the Starlight Echo Station offers inexhaustible creative potential! Tape EP-III There’s something special about tape delay — the less-than-perfect repeats, the subtle wow and flutter of the tape, and that intangible vibe that just makes you crave more! The Echo Station’s Tape EP-III effect is an accurate emulation of one of music’s most renowned tape delays, which was heartily embraced by guitar luminaries such as Neil Young, Jimmy Page, and Eric Johnson. The Tape EP-III captures the vibe of the original unit, including the musical preamp section, which can be driven into gritty distortion for adding more bite to the delayed signal — making for the opposite effect of the darkening repeats heard on bucket-brigade delays. Additionally, the Tape EP-III features the dropouts, tape slices, and noise inherent to the vintage devices, but it allows you to season them to taste. Finally, the Tape EP-III comes in three variations, each with its own distinctive character. Analog DMM Based on the iconic vintage delay pedal housed in a massive trapezoid chassis, the Analog DMM is the prototypical bucket-brigade delay: warm and wooly with disintegrating repeats that made it a favorite choice of shoegazers in the 1990s. Like the original, the Analog DMM includes a chorus-vibrato control for adding a touch of seasick warble. Plus, Universal Audio took this effect further than the original, stretching the delay time to a full second versus the original unit’s contestable claim of 400ms. Faithfully re-creating the standard by which all other bucket-brigade delays are judged, the Analog DMM is absolutely addictive! Precision While many musicians love colorful analog delays, sometimes a part demands the pristine clarity of a cutting-edge digital delay unity. That’s where Precision comes in. Designed from the ground up for the Starlight Echo Station, Precision serves up crystal-clear repeats with loads of modulation options derived from UAD’s venerable plug-in library. For crisp ambient textures, Precision is a no-brainer; however, it also pairs excellently with hardware synthesizers for concocting Vangelis-style synthscapes. Free bonus effect: Cooper Time Cube Along with the three stunning stock effects, Universal Audio throws in an additional effect when you register your Starlight Echo Station — Cooper Time Cube — which can be loaded onto the pedal via USB. Designed by Bill Putnam and Duane H. Cooper, the Cooper Time Cube was the world’s first electromechanical delay, which used a coiled garden hose to provide a unique echo effect with a fixed delay time. With modern champions like Jack White and award-winning engineer Vance Powell, the Cooper Time Cube has seen a recent resurgence — it has a magical way of fattening any signal and adding stereo width to a mono source. Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Starlight Echo Station Delay boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app and USB MIDI control with BPM clock sync, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: 2 legendary echo unit emulations and a cutting digital delay powered by UAD DSP Tape EP-III re-creates the vibey, idiosyncratic character of celebrated tape echo Analog DMM is a faithful reproduction of the standard-bearer for bucket-brigade delay Precision offers crystal-clear digital delay with modulation derived from UAD’s plug-in library Preset mode for switching between 2 different effects with a spillover option for preserving echo tails Free bonus effect upon registration: Cooper Time Cube Operates in mono, dual-mono, and stereo modes with automatic mono/stereo detection Rugged enclosure with top-notch components True bypass and optional buffered bypass modes UAFX Control app expands functionality USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Delay, Echo Analog/Digital:    Digital Effects:    Tape EP-III, Analog DMM, Precision Digital Delay, Cooper Time Cube Delay (download) Presets:    Recall Stored Settings, 6 x Subdivision Options, 2 x Dual-delay Modes Max Delay Time:    2500ms Inputs:    2 x 1/4" TS (L/mono,R) Outputs:    2 x 1/4" TS (L/mono,R) USB:    USB-C (updates) True Bypass:    Yes, Switchable to Buffered (via software) Features:    Dual-processor UAFX Engine Software:    UAFX Control app (Android/iOS 11 or later) Power Source:    9V DC 400mA power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-STAR Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-RUBY-U Ruby '63 Top Boost Amplifier Pedal Inspired by the legendary 2 x 12-inch combo amplifier that powered the British invasion, Universal Audio’s Ruby ’63 Top Boost amp pedal is loaded with jangle and bite! This pedal is an end-to-end emulation of one of the most iconic British amps of the ‘60s, sporting Brilliant, Normal, and Vibrato channels that deliver everything from chimey cleans to all-out crunch. Guitarists are amazed at how closely the Ruby ’63 recreates the sound of a tube amp recorded in a live room, and this life-like quality comes courtesy of UA’s incredible mic, cab, and Dynamic Room Modeling technology. What's more, each pedal in the UAFX series allows you to bypass your amplifier's preamp when the pedal is engaged via the special "4-cable" mode, supercharging your amp with two additional channels. For even greater control, the Ruby ’63 sports Bluetooth and MIDI compatibility to connect to Universal Audio’s UAFX app for enhanced editing, expanded control, access to artist presets, and more! Three distinct amp styles Ruby ’63 comes loaded with three different channels for a wealth of sonic possibilites. Plus, depending on which channel you’re using, the boost control offers unique way to add some character to your tone! Normal: Looking for a chimey clean tone? This setting features a high amount of headroom and simplified tone controls. As a nod to the original model, this setting’s only EQ shaping control is the Cut knob — both the Bass and Treble knobs are completely disabled. Turning the boost knob activates a germanium-style treble booster.Brilliant: The perfect mode for guitarists chasing a ‘60s-style British tube crunch. This setting has the lowest amount of headroom and incorporates an extra tube for boosted treble and gain. In this mode, the boost injects a tape delay-inspired style of preamp gain into your signal.Vibrato: This setting is similar to the Brilliant channel, but with the addition of a deep, choppy vibrato setting. To keep things smooth and clear, this setting’s boost control adds clean gain. Switch up your speakers Part of the Ruby ’63’s magic is found in the dead-on speaker/cab emulations, bolstered by Universal Audio’s Dynamic Room Modeling technology. The Ruby ’63 comes loaded with three cab/mic/speaker settings, seamlessly matched to the three different amplifier modes. Guitarists looking to cover a wide sonic range will love experimenting with the different speaker and amp pairings; plus, when registering the Ruby ’63 with Universal Audio, you get three more free cab sims to play with! 4-cable mode offers powerful channel switching Each pedal in Universal Audio’s UAFX series features a special “4-cable” mode accessible via the UAFX Control app, allowing you to bypass your amp’s preamp when the pedal is engaged for incredibly realistic tube-style tones. By hooking your pedal up to both your effects loop send/return and the front of amp input, you can instantly switch between your amp’s stock tone and your UAFX pedal routed straight into the power amp, effectively adding two extra channels to your amplifier. What’s more, Universal Audio designed this feature with multiple pedal setups in mind — you can connect any number of UAFX pedals in this configuration for multi-channel madness! Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Ruby '63 boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app, new footswitch modes for intelligent preset switching, and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, explore Live, Tour, and A/B-C/D footswitch performance modes, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: Authentic end-to-end replication of one of the most iconic 2 x 12-inch British combo amplifiers of the ’60s 3 separate channels including Brilliant, Normal, and Vibrato to run the tonal gamut Deep, harmonic vibrato available on the Vibrato channel Room knob adds some air and ambiance to your signal Boost control for easy breakup, with unique functions on each amp channel 3 separate speaker/cab/mic options for a wide range of different tonal flavors 3 bonus cabs are provided when registering the Ruby ’63 4-cable mode bypasses your amplifier's preamp when the pedal is engaged, giving you 2 more channels to play with USB-C port for firmware updates Bluetooth-compatible for access to Universal Audio’s UAFX app Save and access presets using the right footswitch USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Amp Emulation, Boost Analog/Digital:    Digital Channels:    3 Form Factor:    Pedal EQ:    2-band EQ, Cut Presets:    1 x Onboard Amp Modeling:    3 x Speaker models, 3 x Cabinet emulations Distortion/Overdrive:    Boost Effects:    Vibrato Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C (firmware updates) Bypass Switching:    Buffered Software:    UAFX Control mobile app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Features:    Mono/Stereo, 4-cable mode, Bluetooth v5.0 Power Source:    9V DC (400mA) power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-RUBY Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-OX-STOMP-U OX Stomp Dynamic Speaker Emulator Stereo Pedal Building off Universal Audio’s industry-defining Ox unit, the Ox Stomp Dynamic Speaker Emulator is a single-pedal solution for perfectly produced guitar tones. Simply pair the Ox Stomp with your preferred amp-in-a-box or digital amp modeler to elevate your tone with 22 masterfully emulated speaker/cab combinations, which are powered by Universal Audio’s cutting-edge Dynamic Speaker Modeling. Ox Stomp’s two 3-position mic switches allow you to pair any of its six vintage mic replications to achieve the recorded cab tone of your dreams, and you can also choose an additional mic for your Room control. No produced guitar tone is complete with a slew of effects, so Ox Stomp also boasts an extensive array of delay, compression, reverb, modulation, and EQ parameters accessible via the UAFX Control app with MIDI compatibility to expand your control even further. The 6-position rig knob ties it all together, giving you instant access to six of your favorite cab/mic/effect combinations. Whether you’re running a UAFX amp pedal or any other form of amp modeler, Ox Stomp will transform your tone with record-ready studio sonics! More than 20 legendary cabs to choose from The Ox Stomp is a comprehensive stompbox solution for perfectly produced guitar tones, and it all starts with Universal Audio’s immaculately modeled cabinet and speaker emulations. From classic 1950s combos to roaring high-gain stacks, Ox Stomp sports 22 speaker/cab combos to cover any musical application in the book. Moreover, Universal Audio’s Dynamic Speaker Modeling Technology replicates every minute sonic nuance and harmonic detail of your chosen speakers, including cone cry, speaker breakup, and even a dedicated knob to fine-tune Speaker Drive. Six vintage microphone emulations To attain a truly studio-polished tone, speakers are only half the battle — you will need a few mics to capture your cabs! Luckily, Ox Stomp has six spot-on re-creations of the most iconic vintage microphones in recording history. Classic ribbons, discerning condensers, and time-tested dynamic microphones — the Ox Stomp’s two 3-way microphone switches allow you to pair any of this pedal’s microphone emulations together in the configuration of your choice. Plus, the Room knob gives you the power to choose any of the Ox Stomp’s six mic models as your room mic to add a touch of breath and liveliness to your signal. Picky about your mic placement? The UAFX Control app offers in-depth positioning control over all three of your mics, in addition to thorough per-mic EQ settings. UAFX Control app offers a studio-grade effects arsenal Guitarists are amazed by the studio-grade quality of the Ox Stomp’s mic and speaker emulations. Of course, one last ingredient is key to any well-produced guitar tone: effects. That’s no problem here — simply use your mobile device to pair the UAFX Control app with your Ox Stomp to access an incredible array of studio and guitar effects, from genuine UA 1176 compression to spacey reverb to delay to extensive EQ options. Once you’ve chosen your required effects, you can save cab/mic/effect combinations to the rig knob for instant access to six of your favorite tonal presets — a must-have feature for guitarists running several disparate digital amplifier models in a single show or session. Moreover, the Ox Stomp’s “B” footswitch can be configured to serve as a mirror image to the “A” side, effectively giving you six more rigs to choose from. Do you prefer a small set of rigs? Set the “B” footswitch to a variety of other uses, including serving as a dedicated on/off toggle for one of your effects. As a bonus, Universal Audio also includes 100 masterfully curated rig presets to choose from right out of the box! Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Ox Stomp Dynamic Speaker Emulator boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: Extraordinarily lifelike cabinet, microphone, and effect modeler, designed to elevate amp-in-a-box pedals and digital amplifier modeling units with perfectly produced tones 22 speaker cabinet simulations, offering some of the iconic cab and speaker combos in guitar history Universal Audio Dynamic Speaker Modeling captures every sonic detail and harmonic nuance of the Ox Stomp’s speaker selection, including speaker breakup, cone cry, and speaker drive 6 precisely modeled vintage microphone emulations supply a studio-grade snapshot of your chosen cab Up to 3 microphone emulations can be dialed in at once: Mic 1, Mic 2, and Room (your room mic selection) UAFX Control app offers a wealth of effects to choose from, including UA 1176 compression, reverb, EQ (including per-mic EQ), stereo delay, mic placement options, and more 6-position Rig knob grants instant access to your favorite cab/mic/effect combinations Second footswitch can be configured to function as a mirror to the A footswitch, effectively giving you 6 unique rigs to choose from Includes 100 expertly curated rig setups for track-ready tones right out of the box Analog dry through to keep your dry signal pure when the effect is disengaged Durable metal enclosure with silent switching USB-C port for easy updates Requires a dedicated 9V DC, center-negative, 400mA power supply (not included) USB MIDI compatibility for expanded control Tech Specs; Pedal Type:    Speaker Emulator Analog/Digital:    Digital Amp Modeling:    22 x speakers, 6 x microphones Inputs:    2 x 1/4" TS (line/Hi-Z) Outputs:    2 x 1/4" TS USB:    1 x USB-C (updates) Bypass Switching:    Buffered Bypass Software:    UAFX Control app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Power Source:    9V DC (400mA) power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.3 lbs. Manufacturer Part Number:    GPM-OXSTP Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-KNUCKLES-U '92 Rev F Dual Rec Amplifier Pedal A watershed year for high-gain amplification, 1992 introduced the double-rectified monster that would unite metalheads, punks, and rockers alike with its fire-breathing tone. Three decades down the line, Universal Audio’s Knuckles ’92 Rev F Dual Rec Amplifier puts the punch of that all-time classic tube head on your pedalboard. This stereo amp and cab simulation pedal’s Green, Orange, and Red channel voicings supply everything from the original amp’s signature tight and ultra-saturated gain-laden sounds to a rich palette of full-bodied cleans. Six classic microphone and cabinet configurations allow you to twist and tweak Knuckles’ response to your taste, and you also get an onboard TS-style overdrive, preamp boost, and a noise gate to cut out unwanted noise. What’s more, Universal Audio’s UAFX app unlocks a host of expanded tone-shaping options, including the ability to switch between EL34 and 6L6 power tubes, change from solid-state to tube rectification, and fine-tune every element of every setting. Additionally, with USB MIDI compatibility, you can further expand your control with additional presets and performance modes. From subterranean nu-metal riffage to buzzsaw pop-punk crunch to arguably the most pivotal metal tones of the ’90s and the aughts, Universal Audio’s Knuckles ’92 pedal comprehensively captures the soul of hard-hitting California boogie. Multichannel madness Universal Audio’s UAFX pedals are revered at Sweetwater for their uncompromising commitment to sonic accuracy, capturing every tonal nuance and harmonic detail of the amps that inspired them. And to truly replicate the vibe of a classic double-rectified amplifier, one voice simply won’t cut it — the original amp’s trio of channels ran the tonal gamut, resulting in its widespread adoption among players from disparate musical backgrounds. To match the flexibility of the original, Knuckles packs three channels: Green, Red, and Orange. Combined with this pedal’s built-in TS-style overdrive and integrated preamp boost, Knuckles tackles everything from face-melting lead tones to thunderous crunch, along with a pleasing assortment of cleans to balance out this pedal’s all-out aggression. 4-cable mode offers powerful channel switching Each pedal in Universal Audio’s UAFX series features a special “4-cable” mode accessible via the UAFX Control app, allowing you to bypass your amp’s preamp when the pedal is engaged for incredibly realistic tube-style tones. By hooking your pedal up to both your effects loop send/return and the front of amp input, you can instantly switch between your amp’s stock tone and your UAFX pedal routed straight into the power amp, effectively adding two extra channels to your amplifier. What’s more, Universal Audio designed this feature with multiple pedal setups in mind — you can connect any number of UAFX pedals in this configuration for multichannel madness. Switch up your speakers Most of Knuckles’ magic is in its handpicked microphone and speaker combinations, bolstered by Universal Audio’s Dynamic Room Modeling technology. Knuckles sports three of these settings right out of the box, granting you a trio of roaring 4 x 12-inch tones to choose from. Furthermore, you can connect to the UAFX app to unlock three additional cabs. Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Knuckles ’92 boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app, new footswitch modes for intelligent preset switching, and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, explore Live, Tour, and A/B-C/D footswitch performance modes, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: UAFX amp modeling pedal that rigorously replicates the tone of a classic double-rectified California tube head championed by iconic metalheads, punks, rockers, and more Includes Green, Orange, and Red channels to deliver everything from the original’s signature ultra-tight high-gain saturation to smoldering lead tones to captivating cleans Built-in TS-style overdrive and preamp boost inject your tone with a dose of extra heat Dish out gain-laden tones without a hint of noise thanks to the built-in noise gate Includes 3 studio-ready cab/mic emulations, with 3 more available via the UAFX app Presets available to save your favorite sounds 4-cable mode bypasses your amplifier’s preamp when the pedal is engaged USB-C port for firmware updates Bluetooth-compatible for access to Universal Audio’s UAFX app USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Amp Emulation, Overdrive Analog/Digital:    Digital Channels:    3 Form Factor:    Pedal EQ:    3-band EQ, Presence Presets:    1 x Onboard Amp Modeling:    6 x Cabinet emlations Distortion/Overdrive:    Overdrive Effects:    Noise Gate Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C (firmware updates) Bypass Switching:    Buffered Software:    UAFX Control mobile app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Features:    Mono/Stereo, 4-cable mode, Bluetooth v5.0 Power Source:    9V DC (400mA) power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-KNUC Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-GOLDEN-U UAFX Golden Reverberator Pedal Universal Audio’s stunning emulations of classic studio reverbs have become indispensable tools in the production arsenals of artists and engineers alike, including those of us at Sweetwater. Now, with the Universal Audio Golden Reverberator pedal, guitarists can take those breathtaking ambient reverbs out of the studio and place them on their pedalboards. Packed with three reverb types — Spring 65, Plate 140, and Hall 224 — the Golden Reverberator pedal can instantly go from splatty and splashy to lush and atmospheric, and anything in between. While the Golden Reverberator is built on the classics, it leverages its powerful DSP to expand the capabilities of the original units, delivering several modulation options, stereo and dual-mono operation, and the ability to switch between presets while allowing the effects to spill over and keep their tails intact. Additionally, with USB MIDI compatibility, you can further expand your control with additional presets. Have you always wanted to bring your favorite studio reverbs onstage? Don't delay in checking out the Golden Reverberator from Universal Audio! Spring 65 Because of its dynamic nature, spring reverb is notoriously difficult to emulate. That’s why Universal Audio spent over three years developing the Spring 65 to capture every detail, nuance, splash, and drip of physical reverb tanks. With three unique variations of tube-driven tanks to choose from, Spring 65 will astound you with its uncanny accuracy. Plate 140 An indispensable part of the larger-than-life studio recordings of the 1970s, plate reverbs are unmatched for their lush sound, shimmering tails, and ability to slip into a mix without muddying up the works. The Golden Reverberator’s Plate 140 provides three distinctive plates to fuse your guitar lines with epic atmospherics. Add new dimension to a singing solo or bathe strummed chords in a warm, reverberant wash for immersive soundscapes, among other applications. Hall 224 One of the earliest professional-grade digital reverb units, the 224 was highly renowned for its crystal-clear reverbs and detailed tweakability. The Hall 224 provides a tasty alternative to the Spring 65 and Plate 140, with a modern edge suited for experimental and ambient guitar work. Choose from small, medium, and large hall settings to find the perfect environment for your guitar parts to sit, and independently control the decay of the high, mid, and low frequencies to tailor the reverb’s sound to any setting. Two additional free effects: Plate 224 and Chamber 224 Along with the three stunning stock effects, Universal Audio adds a bonus in the form of offering two additional 224 effects when you register your Golden Reverberator — Plate 224 and Chamber 224 — which can be loaded onto the pedal via USB. Plate 224 boasts a sweet, bright top end that's perfect for clean guitars; Chamber 224 is echoic and brooding, making it ripe for ambient arrangements. Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Golden Reverberator boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: 3 classic studio reverb effect emulations powered by UAD DSP Spring 65 accurately re-creates 3 unique vintage reverb tanks Plate 140 offers the warm, lush reverb that was a staple of 1970s studio recordings Hall 224 comes in 3 flavors, small, medium, and large, with independent control over high-, mid-, and low-frequency decay 2 free effects upon registration: Plate 224 and Chamber 224 Operates in mono, dual-mono, and stereo modes with automatic mono/stereo detection Rugged enclosure with top-notch components True bypass and optional buffered bypass modes UAFX Control app expands functionality USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Reverb Analog/Digital:    Digital Effects:    Spring 65, Plate 140, Hall 224 Presets:    Recall Stored Settings Inputs:    2 x 1/4" TS (L/mono,R) Outputs:    2 x 1/4" TS (L/mono,R) USB:    USB-C (updates) True Bypass:    Yes, Switchable to Buffered (via software) Features:    Dual-processor UAFX Engine Software:    UAFX Control app (Android/iOS 11 or later) Power Source:    9V DC 400mA power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-GOLD Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-ENIGMATIC-U Enigmatic '82 Overdrive Special Amplifier Pedal Of all the amplifiers in 6-string history, there is no model more mythologized than the boutique D-style amps favored by Stevie Ray Vaughan, John Mayer, Robben Ford, and other all-time greats — the Universal Audio Enigmatic ’82 brings their sound to the masses. The Enigmatic ’82 brilliantly captures the unmatched dynamics and blooming overtones of a D-style amp revered for its rather “special” overdrive tones, precisely modeled by UA using a myriad of vintage examples that span over 30 years of production. This pedal’s flexible control configuration provides you with the same sound-shaping controls as an original model, including switchable Jazz and Rock modes to grant you harmonic-dense overdrive, shimmering clean elegance, and everything in between. Furthermore, the Enigmatic ’82 allows you to build your dream D-style amp from the ground up, with flexible FET preamp and HRM overdrive voicings, tone stack options, power tube bias, and beyond. You also get a trio of studio-grade cabinet/microphone combinations onboard, in addition to enhanced editing options, artist presets, and more via the UAFX control app with MIDI compatibility to expand your control even further. Short of a 6-figure investment into a vintage D-style amplifier, the Enigmatic ’82 is a surefire solution to capture one of the most sought-after sounds in guitar history. Immaculately modeled using vintage originals Tracking down a single D-style amp to model is no small feat. However, a single model doesn’t tell the whole story — as any of amplifier historians will be quick to tell you, D-style amplifiers are famously flexible in design, with most models featuring custom-voiced circuits tuned to their owner’s tonal tastes. In a true testament to its dedication to sonic authenticity, Universal Audio took on the herculean task of rounding up scores of the iconic amplifiers that inspired the Enigmatic ’82. The result? An immensely powerful pedal that merges all the best bits of the 1970s Santa Cruz–made models with the later Los Angeles amplifiers. This pedal perfectly captures the tremendously touch-sensitive dynamics and harmonic-drenched voice that made the original brand the most mythologized amp manufacturer in guitar history. And yet, the Enigmatic ’82 goes one step further: this pedal’s UAFX control app integration allows you to essentially build your own custom D-style amplifier from scratch. From the FET preamp to the legendary HRM overdrive voicing to the 1980s tone stack from another revered D-style amp, the Enigmatic ’82 gives you myriad options to mix and match, including more nuanced elements like output tube bias, power supply stiffness, and much more. In stark contrast to the goop-covered circuits of the original D-style amplifiers, the inner machinations of your Custom mode creations are no enigma. 4-cable mode offers powerful channel switching Each pedal in Universal Audio’s UAFX series features a special “4-cable” mode accessible via the UAFX Control app, allowing you to bypass your amp’s preamp when the pedal is engaged for incredibly realistic tube-style tones. By hooking your pedal up to both your effects loop send/return and the front of amp input, you can instantly switch between your amp’s stock tone and your UAFX pedal routed straight into the power amp, effectively adding two extra channels to your amplifier. What’s more, Universal Audio designed this feature with multiple pedal setups in mind — you can connect any number of UAFX pedals in this configuration for multichannel madness. Switch up your speakers Much of the Enigmatic ’82’s magic is found in its handpicked microphone and speaker combinations, bolstered by Universal Audio’s Dynamic Room Modeling technology. The Enigmatic ’82 boasts three of these settings right out of the box, supplying you with a clear and focused 1 x 12-inch cab and dual 2 x 12-inch cabs with a rounder, deeper voice. Furthermore, the Enigmatic ’82’s companion UAFX app unlocks a whopping six additional cabinets, with several massive-sounding 4 x 12-inch monsters at your disposal. Stock cabinets: 1 x 12-in. Black GB25 2 x 12-in. Boutique D65 2 x 12-in. Brute Bonus cabinets: 4 x 12-in. UK V30 2 x 12-in. JBF120 1 x 12-in. Black EV12 4 x 12-in. Stripped GB 1 x 12-in. JBG125 2 x 12-in. D-EV12 Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Enigmatic ’82 boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app, new footswitch modes for intelligent preset switching, and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, explore Live, Tour, and A/B-C/D footswitch performance modes, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: UAFX modeling pedal that captures the sound of a nearly mythological amplifier Modeling based on a variety of vintage examples spanning over 30 years of production Versatile tone-shaping options, including a 3-band EQ, Bright, Presence, Ratio, and Room ambience Classic D-style Rock/Jazz switch provides 2 distinct tonal voices to play with Comes equipped with 3 studio-grade mic/cab combinations right out of the box, with 6 bonus cabs available via the UAFX app Custom mode gives you the power to mix and match different elements of the most famous D-style amps, including preamps, mods, tone stacks, and more Presets are available to save your favorite sounds 4-cable mode bypasses your amp's preamp when the pedal is engaged USB-C port for firmware updates Bluetooth for access to Universal Audio's UAFX app USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Amp Emulation Analog/Digital:    Digital Channels:    2 Form Factor:    Pedal EQ:    3-band EQ, Deep/Mid, Bright, Presence Presets:    1 x Onboard Amp Modeling:    3 x Speaker Models Distortion/Overdrive:    Overdrive Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C (firmware updates) Bypass Switching:    Buffered Bypass Software:    UAFX Control mobile app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Features:    Mono/Stereo, 4-cable mode, Bluetooth v5.0 Power Source:    9V DC 400mA power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-ENIG Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-DREAM-U Dream '65 Reverb Amplifier Pedal Big cleans, deep vibrato, springy reverb — sound familiar? Universal Audio’s Dream ’65 Reverb Amp pedal is an authentic start-to-finish emulation of perhaps the most recorded 1 x 12-inch combo amp of all time. This pedal gives you everything an original model would and more, boasting three speaker options and three amp versions — stock and two common modifications — that perfectly capture the sparkling cleans and rich overdrive of this pedal’s inspiration. Guitarists are amazed at how closely the Dream ’65 re-creates the sound of a tube amp recorded in a live room, and this lifelike quality comes courtesy of UA’s incredible mic, cab, and Dynamic Room Modeling technology. What's more, each pedal in the UAFX series allows you to bypass your amplifier's preamp when the pedal is engaged via the special "4-cable" mode, supercharging your amp with two additional channels. Are you looking for even greater control? The Dream ’65 sports Bluetooth and MIDI compatibility to connect to Universal Audio’s UAFX app for enhanced editing, expanded control, access to artist presets, and more! A trio of distinct amp styles The Dream ’65 comes loaded with three different amp versions for a wealth of sonic possibilities. Naturally, this pedal emulates the stock version of its inspiration, but two modded versions are included with unique boost controls for added flexibility. Stock: Looking for lush cleans? This is the setting for you! In this mode, the Boost knob adds up to 10dB of clean gain. Lead: In this mode, the bright cap is removed when the boost is above OFF, giving lower boost settings a rich, rounded-off tone. Once you make it past around 10 o’clock, the Dream ’65 kicks up the midrange for a greater punch when playing with drive. D-Tex: The pride and joy of Texas blues tone! This setting significantly increases gain and midrange for a smooth overdriven tone. Cranking the Boost knob reduces the impact of the tone stack, leading to a more open tone. Switch up your speakers Part of the Dream ’65’s magic is found in the speaker/cab emulations, bolstered by Universal Audio’s Dynamic Room Modeling technology. The Dream ’65 comes loaded with three cab/mic/speaker settings, seamlessly matched to the three amplifier modes. Guitarists looking to cover a wide sonic range will love experimenting with the different speaker and amp pairings; plus, when registering the Dream ’65 with Universal Audio, you get three more free cab sims to play with! 4-cable mode offers powerful channel switching Each pedal in Universal Audio’s UAFX series features a special “4-cable” mode accessible via the UAFX Control app, allowing you to bypass your amp’s preamp when the pedal is engaged for incredibly realistic tube-style tones. By hooking your pedal up to both your effects loop send/return and the front of amp input, you can instantly switch between your amp’s stock tone and your UAFX pedal routed straight into the power amp, effectively adding two extra channels to your amplifier. What’s more, Universal Audio designed this feature with multiple pedal setups in mind — you can connect any number of UAFX pedals in this configuration for multichannel madness! Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Dream ’65 boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app, new footswitch modes for intelligent preset switching, and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, explore Live, Tour, and A/B-C/D footswitch performance modes, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: Authentic end-to-end replication of 1 of the most iconic 1 x 12-in. combo amplifiers of the ’60s Boost control for easier breakup with unique settings on each amp mode Built-in spring reverb and vibrato to capture the sound of the ’60s 3 separate speaker/cab/mic options for a wide range of tonal flavors Stock mode is supplemented with 2 of the most iconic mods of the original 3 bonus cabs are provided when registering the Dream ’65 4-cable mode bypasses your amplifier's preamp when the pedal is engaged, giving you 2 more channels to play with USB-C port for firmware updates Bluetooth for access to Universal Audio’s UAFX app Save and access presets using the right footswitch USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Amp Emulation, Boost Analog/Digital:    Digital Form Factor:    Pedal EQ:    2-band EQ Presets:    1 x Onboard Amp Modeling:    3 x Speaker models, 3 x Cabinet emulations Distortion/Overdrive:    3 x Boost Circuits Effects:    Reverb, Vibrato Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C (firmware updates) Bypass Switching:    Buffered Software:    UAFX Control mobile app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Features:    Mono/Stereo, 4-cable mode, Bluetooth v5.0 Power Source:    9V DC (400mA) power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-DRM Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-DEL-VERB-U Del-Verb Ambience Companion Reverb and Delay Pedal One part Golden Reverberator and one part Starlight Echo Station, Universal Audio’s Del-Verb Ambience Companion combines six of the UAFX series’ authentic effect models into a stereo reverb and delay powerhouse. First up, this pedal’s reverb side contains three exacting emulations, with a classic tube-driven spring reverb, an atmospheric plate reverb unit, and a clarity-packed hall reverb from the early days of the digital revolution. They’re all perfectly paired with the delay side’s ‘70s-style tape echo, pedal-inspired analog delay, and the UAFX Precision delay for a well-defined digital snap. Moreover, the delay side offers two setting-specific knobs — Color and Mod — to unlock an endless level of tweaking, and that’s before you get to the UAFX app’s downloadable custom voicings and USB MIDI compatibility to expand your control even further. A wealth of utility features, including analog dry through, spillover/trails functionality, tap tempo, stereo/dual mono operation, and more, complete the long-standing UAFX formula of packing studio-grade sound into a simple stompbox. Three expertly emulated echoes The Del-Verb Ambience Companion’s reverb side contains three expertly emulated modes, the same modes found on Universal Audio’s highly renowned Golden Reverberator pedal. Spring 65: This setting comes straight out of an early ’60s tube amp with a veritable wave of surfy splash. Golden Unit captures the de-facto standard guitar reverb tone, and guitarists of all stripes often prefer a spring-style reverb for a do-it-all workhorse ’verb. Plate 140: Replicates the moody sound of the world’s first plate reverb unit. This setting produces a dense, full reverb that adds weight and atmosphere to your every note. Hall 224: Clean, crisp, and clear — this mode is based on the first-ever digital reverb units, with a shimmering hall tone. A trio of top-class delays Just like the reverb section, the Del-Verb’s delay algorithms come straight out of another classic Universal Audio pedal: the Starlight Echo Station. Tape EP-III: If you’re after a character-filled delay with plenty of wow and flutter, this mode will surely be your go-to. Tape EP-III is a nearly indistinguishable re-creation of a legendary tape echo unit from the ’70s, famously used by some of rock’s most renowned guitarists. Analog DMM: If you’re not sure what this one is, one strum through the Analog DMM is sure to jog your memory, man. It’s an absolute classic of analog delay tone with massive character in the color-filled degrading repeats. Precision: Vibe-filled analog and tape delays are all well and good, but sometimes the pristine echo of a digital delay is required. When that time comes, flip over to the Precision mode for crystal-clear repeats with the utmost sonic clarity. Stretch out your sonic boundaries with the Color and Mod controls The Del-Verb has two character-packed controls to further fine-tune your delays: Color and Mod. Color adjusts a unique element of each Delay’s tone, from the record level of the Tape EP-III to the input gain of the Analog DMM to the delay tone of Precision. In comparison, Mod gives you access to two distinct modulation effects for each of your delays, and it’s completely out of the circuit at the noon position. Tape EP-III Mod: On the left side of the knob, this Mod setting gives you NOS tape, while the right side supplies the warbly sound of a well-used reel. Analog DMM Mod: Vibrato can be found on the left side, and the right side gives you a lush chorus. Precision: Looking for the jet-engine swoosh of a fast-paced flanger? Slide the knob over to the left. Like the Analog DMM Mod, the right side of this Mod setting is also a watery chorus. Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Del-Verb Ambience Companion boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app and USB MIDI control with BPM clock sync, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: Stereo reverb and delay pedal boasting immaculately emulated replications of some of the most sought-after hardware units in history UAFX dual-engine processing delivers the highest level of sonic authenticity Runs separate stereo instances of the reverb and delay sides for maximum depth and atmosphere 3 spot-on emulations of legendary reverb units, including an amp-style spring reverb, a moody plate reverb, and one of the world’s first digital reverb units 3 vintage-style echoes, from a timeless analog delay pedal to a ’70s-style tape echo replication to Universal Audio’s own Precision Delay Optional UAFX Control app offers tap tempo, custom effect voicing, and many other fine-tuning features Buffered bypass operation keeps your signal strong in long cable runs Analog dry through retains your dry signal’s purity Optional spillover/trails to keep the echo rolling when the pedal is disengaged Can be operated in both stereo and dual mono modes USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Delay, Reverb Analog/Digital:    Digital Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C Bypass Switching:    Buffered Software:    UAFX Control app Power Source:    9V DC power supply (sold separately) Power Usage:    400mA Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-DLVRB Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Audio UA-ANTI-U UAFX Anti 1992 High Gain Amp Pedal Tracing back to the early ’90s, as everything from grunge and thrash to death metal and black metal exploded in popularity, a deluge of distortion took the guitar world by storm. Now, with Universal Audio’s UAFX Anti 1992 High Gain Amp, the seminal sounds of the era’s multidimensional suite of distorted and overdriven tones were carefully captured, modeled, and packaged into a sleek stompbox. Equal parts amp-in-a-box and distortion-deliverance pedal, the UAFX Anti 1992 gives you access to a diverse array of sonic-sculpting tools, with multiple cab-speaker combos, live and preset modes, performance-focused channel settings, a 4-cable mode, and beyond. Plus, the Anti 1992 features a 3-band EQ, onboard noise gate, and a slew of customization options available via the accompanying UAFX Control mobile app (including bonus cabs), immensely expanding your stereo-shaping capabilities. Additionally, with USB MIDI compatibility, you can further expand your control with additional presets and performance modes. Guitarists agree that the UAFX Anti 1992 masterfully supplies the degrees of distortion that the pedal’s spiritual predecessor — an iconic 120-watt tube head — delivered to define an era. Spanning Scandinavia and Southern California to Seattle and South Florida, an onslaught of early-’90s metal tones is ripe for your pedalboard. Six onboard modes of era-defining tonal terror Beneath the sleek and ergonomic form factor of the Anti 1992 High Gain Amp, Universal Audio’s UAFX dual-engine empowers worlds of diverse distortions, unrivaled in its emulation authenticity. Its hexad of tone-crafting possibilities comprises time-tested cab-mic combination settings alongside performance-minded channel designations comprising Rhythm, Crunch, and Lead modes. UK V30: 4 x 12-inch Marshall cab, stocked with V30s CA V30: 4 x 12-inch Oversized cab, loaded with V30s White 75: 4 x 12-inch Marshall cab, with iconic Celestion 75s D65: 2x12 cab stocked with D65s Super 80: 4 x 12-inch cab, featuring Celestion 80s Brown JB: 4 x 12-inch cab, utilizing JBL speakers State-of-the-art sound, control, and room modeling Packing the multidimensional sonics of the 120-watt tone titan that birthed an era of sound into a singular stompbox is no small feat. However, UA knew the UAFX Anti 1992 needed to innovate on the iconic tones of the time. Every setting and sonic configuration utilizes the company’s cutting-edge Dynamic Room Modeling technology, derived from its award-winning OX, to give lifelike depth and dimension to your hallmark tones. Its dual-switch design expands your gain-crafting capabilities with Live and Preset modes accessed from the right-side switch, while the left-side switch can be configured for Live, Gate, or Overdrive operations. Moreover, high and low input routing is available, in addition to four BIAS Modes: Cool, Warm, Cool Choke, and Warm Choke, with additional Post Gain and Room parameters to further hone your tones. Expanded sonic-sculpting capabilities Diving into the Anti 1992’s accompanying UAFX Control app unveils a detailed suite of sound-design possibilities, accessed via Bluetooth pairing with your iOS or Android device. Presets designed by guitarists from Nevermore, Arch Enemy, Tetrarch, and the Black Dahlia Murder supply era-accurate tones from your favorite records — but these album-ready presets are only the beginning! TS-style overdrive and TCE-inspired integrated preamp settings are selected via the app, with a Bright Switch toggle and customizable Noise Gate Threshold, Attack, Release, and Hold values instantly realized, hands-free. A trio of comprehensive Clean, Punch, or Punch+ options expand the Rhythm channel’s capabilities. Punch mode combines the high-voltage lead with the Clean channel’s robust lows, optimized for 7- or 8-string guitars, and a plethora of down-tuned destruction. Punch+ augments this mode by introducing a 10,000-ohm cathode resistor to the rig’s cold clipper circuit, resulting in a multiplicative boon to gain, harmonics, crunch, and character. Powerful channel-switching control Each pedal in Universal Audio's UAFX series features a "4-cable" mode accessible via the UAFX Control app, allowing you to bypass your amp's preamp when the pedal is engaged for incredibly realistic tube-style tones. By hooking your pedal up to both your effects loop send/return and the front of amp input, you can instantly switch between your amp's stock tone and your UAFX pedal routed straight into the power amp, effectively adding two extra channels to your amplifier. What's more, Universal Audio designed this feature with multiple pedal setups in mind — you can connect any number of UAFX pedals in this configuration for multichannel madness! Get the most out of your UAFX gear UAFX 2.0 is here, designed to give you the greatest control over your tone and your live setup. With this latest update, the Anti 1992 High Gain Amp boasts improved Bluetooth and USB-C controls for enhanced connection with Universal Audio's powerful UAFX app, new footswitch modes for intelligent preset switching, and USB MIDI control, opening a world of vast performance capabilities. Whether you engage the UAFX app to unlock deeper tone shaping and access artist-curated presets and effects, explore Live, Tour, and A/B-C/D footswitch performance modes, or connect with your programmable MIDI rig for access to 128 recallable presets and enhanced real-time expression, UAFX 2.0 is primed to elevate every dimension of your playing experience. General Features: Comprehensive high-gain amp emulation pedal provides multidimensional distortions from landmark ’90s metal machines 6 cab and speaker pairings were captured via OX-derived Dynamic Room Modeling tech for unmatched depth and realism across iconic combo configurations UAFX dual-engine delivers robust, lifelike tones from the hallmark 120W tone titan that defined the era TS-style overdrive, malleable boost, onboard noise gate, and TCE-inspired integrated preamp supply record-ready sounds Accompanying UAFX Control app (iOS/iPadOS/Android) opens a gateway to near-limitless sonic sculpting, customization, preset management, and input routing Rhythm Mode includes 3 options for expanded sound design 4-cable mode augments tone-crafting potential via comprehensive interoperative integration tools USB MIDI compatibility for expanded control Tech Specs: Pedal Type:    Amp Emulation, Boost Analog/Digital:    Digital Channels:    2 Form Factor:    Pedal EQ:    3-band EQ, Presence Presets:    1 x Onboard Amp Modeling:    6 x Speaker models Distortion/Overdrive:    3 x Overdrive Effects:    Noise Gate Inputs:    2 x 1/4" TS Outputs:    2 x 1/4" TS USB:    1 x USB-C (firmware updates) Bypass Switching:    Buffered Software:    UAFX Control mobile app OS Requirements - Mac:    iOS 13 or later OS Requirements - PC:    Android 10 or later Features:    Mono/Stereo, 4-cable mode, Bluetooth v5.0 Power Source:    9V DC (400mA) power supply (sold separately) Height:    2.56" Width:    3.62" Depth:    5.55" Weight:    1.24 lbs. Manufacturer Part Number:    GPM-ANTI Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.