Car EQs & Sound Processors (92)

Soundstream MPQ-7B 7-Band Parametric Equalizer w/ Independent Subwoofer Level Control General Features: 30V Bipolar Switching Power Supply 20dB Headroom Eliminated Signal Overload 2 Selectable Balanced RCA Inputs w/ Input gain Front, Rear, & Subwoofer RCA Outputs Seven Frequency Bands with +/- 18db Boost/Cut 40Hz, 100Hz, 275Hz, 700Hz, 2kHz, 5kHz, 14kHz Independent Subwoofer Level Control Selectable Low-Pass Filter: 32Hz, 64Hz, 125Hz Input Selector Switch Fader Control Blue Backlit Control Knobs S/N Ratio: 115dB THD: 0.05% Stereo Separation: 82dB Frequency Response: 10Hz-15kHz Max Output Voltage: 8V ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate RFPEQU Universal Punch Equalization Control & Line Driver General Features: 2-channel universal Punch EQ Built-in line driver provides a bass boost to any aftermarket audio system High voltage line driver allows for up to 10 volts of RMS output Built-in Punch EQ2 equalizer Independent gain control Auto-Sense turn-on with remote out (high level in) 2-channel (left/right) high-level signal input 2 RCA (left/right) low-level output Low distortion and low noise operation Speaker level to RCA line level converter PEQ remote included Discreet surface mount technology Easily mounts behind the dash Operating Voltage: 9-16 VDC @ 200 mA Frequency Response: 20-20,000 Hz Input Impedance: 20,000 ohms Output Impedance: 500 ohms Input Voltage: 650mV-10V RMS Output Voltage: 10V RMS THD+N: .005% Signal to Noise Ratio: >100dB @ 2V (CEA) >110dB @ 10V (Max Output) EQ Frequency Controls: Up to +18dB @ 45 Hz Up to +12dB @ 12,500 Hz Fuse Size: 1 amp It is recommended to install as close to the source unit as possible Dimensions: 4.72"W x 3.15"D x 1.1"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the RFPEQU package: Rockford Fosgate RFPEQU owner's manual Rockford Punch EQ wired remote Hideaway universal PEQ module 16.5' remote cable with RJ-45 connectors on both ends 12" Power harness 12" Signal input harness LED with attached 8" power/ground harness Additional remote front panel Mounting bracket Installation instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream BX-15 Digital Bass Reconstruction Processor General Features: Dash Mount Remote Control Bass Restoration Lighted Display Parametric Bass Control PFM Subsonic Filter Balanced Inputs Bass Output Control PWM High Head Room Power Supply Output Level: 13.5 volt Frequency Response: 10Hz 100KHz THD: 0.003% S/N Ratio: 130dB Balanced Input Noise Rejection: 60 dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PROX4.1 5-Way Electronic Crossover Optimized for Extreme SPL Applications 4-Way Electronic Crossover with Remote Level Control Knob General Features: Dash Mounted Subwoofer Level Control Low/Sub, Mid-Low, Mid-High, High/Tweeter 8.5V Maximum RCA Output Line Driver Mute Keys on All Channels High/Tweeter Signal Processing Options: Variable 1kHz-10kHz High-Pass Crossover Mid-High Signal Processing Options: Variable 12dB 550Hz-3kHz High-Pass & 4kHz-20kHz Low-Pass Crossover Mid-Low Signal Processing Options: Variable 12dB 50Hz-400Hz High-Pass & 30Hz-5kHz Low-Pass Crossover Low/Subwoofer Signal Processing Options: Optional 3-stage 24dB Subsonic Filter Variable 50Hz-350Hz 12dB Low-Pass Crossover Dedicated 1800 Phase Inversion Switch Variable 0-12db 45Hz Bass Boost Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream PROX4.1 5-Way Electronic Crossover Optimized for Extreme SPL Applications & Absolute KIT8 8 Gauge Amp kit 4-Way Electronic Crossover with Remote Level Control Knob General Features: Dash Mounted Subwoofer Level Control Low/Sub, Mid-Low, Mid-High, High/Tweeter 8.5V Maximum RCA Output Line Driver Mute Keys on All Channels High/Tweeter Signal Processing Options: Variable 1kHz-10kHz High-Pass Crossover Mid-High Signal Processing Options: Variable 12dB 550Hz-3kHz High-Pass & 4kHz-20kHz Low-Pass Crossover Mid-Low Signal Processing Options: Variable 12dB 50Hz-400Hz High-Pass & 30Hz-5kHz Low-Pass Crossover Low/Subwoofer Signal Processing Options: Optional 3-stage 24dB Subsonic Filter Variable 50Hz-350Hz 12dB Low-Pass Crossover Dedicated 1800 Phase Inversion Switch Variable 0-12db 45Hz Bass Boost Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PWM-5V 5-Band Parametric Equalizer w/ Subwoofer Control Maybe you’ve got an older car audio system from which you want to get more. Perhaps you’ve got an all-new setup that you want to get the maximum potential. In either case, Power Acoustik’s NEW PWM-5V has (5) bands of equalization that’ll let you fine-tune your sound, along with independent master volume, subwoofer level, and fader controls’ll maintain your highs and lows in balance.The PWM-5V features RCA inputs so that you can connect them to your aftermarket system. The RCA outputs ensure that your amplifiers get a clean, powerful signal for maximum performance. You will also notice this particular Equalizer has a built-in Voltage-Level Indicator. General Features: Power Supply: 11-15 DC Max Output Voltage: 8.5V RMS Frequency Response: 10-50 kHz ± 1 dB Equalization Range: ± 12 dB Subwoofer Crossover Frequency: 43-60 Hz Input Impedance: 20K Ohms Output Impedance: 2K Ohms S/N Ratio: 80 dB Ref. 1V Input T.H.D.: 0.05% SIZE: 7″L x 4.25″W x 1.25″H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PWM-20 4-Band Parametric Equalizer w/ Subwoofer Electronic Crossover General Features: Power Supply: 11-16 DC Neg. Ground Max Output Voltage: 7V RMS/12V Peak Frequency Response: 20-20000Hz Equalization Range: ± 12 dB Subwoofer Crossover Frequency: 30-250 Hz S/N Ratio: 110 dB Ref. 1V Input T.H.D.: 0.05% Blue LED Back Lighting Selectable Balanced Inputs Independent Subwoofer Output and Level SIZE: 7″L x 4.25″W x 1.25″H 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As more and more newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may be more complex than adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies, making it difficult to improve sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you to take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full-range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S has an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. If needed, the controller adds quick adjustability to your system, or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays of up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As more and more newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may be more complex than adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies, making it difficult to improve sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you to take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full-range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S has an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. The controller adds quick adjustability to your system if needed or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays of up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream BX-12 Digital Bass Reconstruction Processor with Remote + Free Absolute Electrical Tape+ Phone Holder They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Soundstream Digital Bass Reconstruction Processor. The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem! Bass Reconstruction Processor SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music. WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency. DASH CONTROL: included with this bass processor can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled. General Features: Digital Bass Processor Enhances the user bass control Dash mount remote control included for convenience PFM Subsonic filter and bass level control Chrome logo plate Top-mounted lights during operation Parametric dass control Balanced RCA inputs with gold-plated contacts PWM High headroom power supply Output Level: 13.5 volt Frequency Response: 10–100,000Hz THD: 0.002% S/N Ratio: 132dB Balanced input noise rejection: 60 dB 1-year Manufacturer's warranty Absolute BT1700 Vinyl Electrical Tape is a good quality, multi-purpose vinyl insulating tape. It has great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable.Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds Withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified Specifications: Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream BX-12 Digital Bass Reconstruction Processor with Remote + Free Absolute Electrical Tape+ Phone Holder They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Soundstream Digital Bass Reconstruction Processor. The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem! Bass Reconstruction Processor SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music. WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency. DASH CONTROL: included with this bass processor can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled. General Features: Digital Bass Processor Enhances the user bass control Dash mount remote control included for convenience PFM Subsonic filter and bass level control Chrome logo plate Top-mounted lights during operation Parametric dass control Balanced RCA inputs with gold-plated contacts PWM High headroom power supply Output Level: 13.5 volt Frequency Response: 10–100,000Hz THD: 0.002% S/N Ratio: 132dB Balanced input noise rejection: 60 dB 1-year Manufacturer's warranty Absolute BT1700 Vinyl Electrical Tape is a good quality, multi-purpose vinyl insulating tape. It has great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable.Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds Withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified Specifications: Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.