00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Power Acoustik RZ4-3000D RAZOR Series 4 Channel Amplifier
$159.99
$279.98
Power Acoustik RZ4-3000D RAZOR Series 4 Channel Amplifier
We’re in a time where small is “in.” Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you must sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired…
Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn it on and off the amplifier. (Hi-Level Input only)
General Features:
Max Power 3,000 Watts
RMS Bridged @ 4Ω 750W x 2
RMS Power @ 2Ω 375W x 4
RMS Power @ 4Ω 285W x 4
Dimensions (4.75″w x 1.625″h) 12.25″
Compact 4.75” Chassis Design for Installation Versatility
MOSFET Power Supply w/ Audiophile Grade IR Transistors
Military Grade SMT PCB Maintains Dynamic Performance
2-ohm Stereo & 4-ohm Bridged Full Range Operation
8ga Power Wire & 12ga Speaker Wire Outputs
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mv-6V Low-Level RCA Inputs
High-Level Input w/ Signal Sense Auto Turn-on
Variable 12dB High Pass & Low Pass Crossovers
10-50Hz Variable 12dB Subsonic Crossover Protects Subwoofers
1 year manufacturer warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Power Acoustik RZ4-2000D RAZOR Series 4 Channel Amplifier
$124.99
$209.98
Power Acoustik RZ4-2000D RAZOR Series 4 Channel Amplifier
We’re in a time where small is “in.” Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you must sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired…
Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn it on and off the amplifier. (Hi-Level Input only)
General Features:
Max Power 2,000 Watts
RMS Bridged @ 4Ω 500W x 2
RMS Power @ 2Ω 250W x 4
RMS Power @ 4Ω 190W x 4
Dimensions (4.75″w x 1.625″h) 11″
Compact 4.75” Chassis Design for Installation Versatility
Compact 4.75” Chassis Design for Installation Versatility
MOSFET Power Supply w/ Audiophile Grade IR Transistors
Military Grade SMT PCB Maintains Dynamic Performance
2-ohm Stereo & 4-ohm Bridged Full Range Operation
8ga Power Wire & 12ga Speaker Wire Outputs
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mv-6V Low-Level RCA Inputs
High-Level Input w/ Signal Sense Auto Turn-on
Variable 12dB High Pass & Low Pass Crossovers
10-50Hz Variable 12dB Subsonic Crossover Protects Subwoofers
1 year manufactures warranty
⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Power Acoustik RZ4-1200D RAZOR Series 4 Channel Amplifier
$109.99
$189.98
Power Acoustik RZ4-1200D RAZOR Series 4-Channel Amplifier
We’re in a time where small is “in.” Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you must sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired…
Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn it on and off the amplifier. (Hi-Level Input only)
General Features:
Max Power 1,200 Watts
RMS Bridged @ 4Ω 300W x 2
RMS Power @ 2Ω 150W x 4
RMS Power @ 4Ω 100W x 4
Dimensions (4.75″w x 1.625″h) 9″
Compact 4.75” Chassis Design for Installation Versatility
MOSFET Power Supply w/ Audiophile Grade IR Transistors
Military Grade SMT PCB Maintains Dynamic Performance
2-ohm Stereo & 4-ohm Bridged Full Range Operation
8ga Power Wire & 12ga Speaker Wire Outputs
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mv-6V Low-Level RCA Inputs
High-Level Input w/ Signal Sense Auto Turn-on
Variable 12dB High Pass & Low Pass Crossovers
10-50Hz Variable 12dB Subsonic Crossover Protects Subwoofers
1 year manufactures warranty
⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A60M Monoblock 600 Watts Class-D Amplifier + 4 Gauge Amp Kit
$229.99
$319.99
Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4OR 4 Gauge Complete Amplifier Kit
Package Includes: 1 Alpine S2-A60M, 1 Absolute KIT4 Amplifier Kit 4 Gauge
Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier
General Features:
Alpine S-Series Mono Power Amplifier - S2-A60M
400W x 1 @ 4 Ohms RMS Power Output
600W x 1 @ 2 Ohms RMS Power Output
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Dimensions: 8” W x 8” H x 2.25” D
Authorized Internet Dealer
1-year Manufacturer's Warranty
Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme
Today, I would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of 4 AWG high current power cable
Three ft. of 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
Six ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit
$229.99
$319.99
Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4OR 4 Gauge Complete Amplifier Kit
Alpine S2-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S2-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S2-A60M package:
S2-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Online product registration information
Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme
Today, I would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of 4 AWG high current power cable
Three ft. of 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
Six ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A60M Mono-Channel 600 Watts S-Series Class-D Amplifier + 4 Gauge Complete Amplifier Kit
$239.99
$329.99
Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit
Alpine S2-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S2-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S2-A60M package:
S2-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual
Alpine Verification Certificate
Online product registration information
Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the correct wire and installation accessories. You might not know that some companies are playing some gimmicks, and you could get ripped off!
Today, I would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 AWG high current power cable
Three ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
Six ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier & 4 X XED-62+6.5" Speaker + Absolute KIT4 4 Gauge Amp Kit
$259.99
$519.99
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier & 2 Pairs XED-62+6.5" Speaker + Absolute KIT4 4 Gauge Amp Kit
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier
The Cerwin Vega XED6004D 4 Channel Amplifier is the perfect addition for anyone looking for amazing power in a compact design. The XED6004D features the latest high-efficiency digital Class D topology. This amp offers 500 Watts max in a compact design, giving you all the power you need without wasting space.
General Features:
Cerwin Vega XED Series Class D Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 80 watts x 4 channel
2 ohms: 120 watts x 4 channel
Bridged, 4 ohms: 240 watts x 2 channel
Total power output: 120 watts
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Bass gain/level remote included
Input sensitivity:
Low level: 250mV - 6.0 volts
High level: 1.3 - 20.0 volts
Total Harmonic Distortion (THD): <0.1%
Variable high-pass filter: 35 - 250 Hz, 24 dB/octave
Variable low-pass filter: 35 - 250 Hz, 24 dB/octave
Variable Bass Boost: bass boost at 50 Hz
Fuse Rating: 2 x 25A
Dimensions: 1.8" W x 7.1" L x 4.7" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Cerwin-Vega Mobile XED62 300W 6.5" XED Series 2-Way Coaxial Car Speakers
For the best live concert experience and most distortion-free performance, look no further than Cerwin-Vega Mobile speakers. They utilize high-energy and high-tolerance components to achieve the best reproduction of music. This pair of XED 6-1 2 in. 300-Watt 2-Way Coaxial Speakers feature curvilinear poly cones, butyl rubber surrounds and balanced metal dome 3 4 in. CV tweeters. They will also work with a piezo 1" add-on tweeter kit sold separately. For maximum sonic performance to precision studio playback, Cerwin-Vega Mobile speakers deliver for just about any applicationGeneral Features:
6.5" 2-Way Coaxial Car Speakers
Power Handling:
Peak: 300 watts
Curvilinear polypropylene cone
Butyl rubber surround
.75" balanced metal dome tweeter
Frequency Response: 60 - 18000 Hz
Top-mount Depth: 2.2"
Mounting diameter: 4.96"
Sensitivity: 94dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier + 4 Gauge Amp Kit
$189.99
$339.99
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier + Absolute KIT4 4 Gauge Amp Kit
The Cerwin Vega XED6004D 4 Channel Amplifier is the perfect addition for anyone looking for amazing power in a compact design. The XED6004D features the latest high-efficiency digital Class D topology. This amp offers 500 Watts max in a compact design, giving you all the power you need without wasting space.
General Features:
Cerwin Vega XED Series Class D Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 80 watts x 4 channel
2 ohms: 120 watts x 4 channel
Bridged, 4 ohms: 240 watts x 2 channel
Total power output: 120 watts
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Bass gain/level remote included
Input sensitivity:
Low level: 250mV - 6.0 volts
High level: 1.3 - 20.0 volts
Total Harmonic Distortion (THD): <0.1%
Variable high-pass filter: 35 - 250 Hz, 24 dB/octave
Variable low-pass filter: 35 - 250 Hz, 24 dB/octave
Variable Bass Boost: bass boost at 50 Hz
Fuse Rating: 2 x 25A
Dimensions: 1.8" W x 7.1" L x 4.7" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier
$149.99
$299.99
Cerwin Vega XED6004D 500W MAX 4 Channel XED Series Car Micro Compact Amplifier
The Cerwin Vega XED6004D 4 Channel Amplifier is the perfect addition for anyone looking for amazing power in a compact design. The XED6004D features the latest high-efficiency digital Class D topology. This amp offers 500 Watts max in a compact design, giving you all the power you need without wasting space.
General Features:
Cerwin Vega XED Series Class D Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 80 watts x 4 channel
2 ohms: 120 watts x 4 channel
Bridged, 4 ohms: 240 watts x 2 channel
Total power output: 120 watts
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Bass gain/level remote included
Input sensitivity:
Low level: 250mV - 6.0 volts
High level: 1.3 - 20.0 volts
Total Harmonic Distortion (THD): <0.1%
Variable high-pass filter: 35 - 250 Hz, 24 dB/octave
Variable low-pass filter: 35 - 250 Hz, 24 dB/octave
Variable Bass Boost: bass boost at 50 Hz
Fuse Rating: 2 x 25A
Dimensions: 1.8" W x 7.1" L x 4.7" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A32F Compact 4-Channel Amplifier w/ Pair of Alpine 6.5" Speakers Package
$389.99
$779.99
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier w/ Pair of Alpine S-S65C 6.5" Speakers Package + Absolute KIT8 Complete 8 Gauge Amplifier Wiring Kit
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
Alpine Type-S S-S65C 240W 6.5" Component Type-S 2-way speaker set w/ Silk Tweeters
General Features:
6-1/2" Type-S Series Car Speakers
Power Handling Peak: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each (CEA-2031 Certified)
Tuned poly-mica cone woofer
Butyl rubber surround for natural response and stability
1" Wide-Range Silk dome tweeter
Optimized air-flow design
Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity
HD Polymer frame
FEA-optimized motor structure
OEM mounting adapters included
Swivel-mount tweeter
4 ohms impedance
Square-wire short voice coil
The new cone design allows for faster energy transfer & clarity
Aramid-reinforced TIL bobbin holds voice coil wire very rigid
High-grade network components
Neodymium tweeter magnet structure
Low-distortion strontium woofer magnet
Speaker grilles KTE-S610G optional and sold separately
Top-mount depth: 2-1/4"
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S-S65C package:
2 Woofers
2 Woofer mount adapter brackets
2 Tweeters
2 Flush mount housings
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-3/16" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
S-S65C owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A32F 4-Channel Digital Class D Car Audio Amplifier + Cerwin-Vega XED650C Component + V465 6.5" Speaker& Amp Kit
$349.95
$699.99
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier + Cerwin-Vega XED650C Component Speaker + Cerwin-Vega V465 6.5" Speaker + Absolute KIT8 Complete 8 Gauge Amplifier Wiring Kit
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.
These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
Cerwin-Vega XED650C 600W 6.5" 2-Way Component Power Handling Speaker
Experience clear, vibrant sound and hear aspects of songs you probably weren't aware of with premium quality products by Carwin-Vega designed and manufactured to make you hear the music and 'feel' it. Made from premium quality materials, every unit from this brand ensures nothing less than long-lasting performance while providing the best live concert experience.
General Features:
6.5" XED Series 2-Way Component System
Power Handling:
Peak: 300 watts
RMS: 30 watts
Curvilinear polypropylene cone
Butyl rubber surround
Linear woven treated red spider
1" balanced metal dome CV tweeter
Frequency Response: 60-18,000 Hz
Top-mount Depth: 2.2"
Sensitivity: 93dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
Cerwin-Vega V465 400W 6.5" 2-Way Vega Series Coaxial Speakers w/ Titanium Tweeters
General Features:
Peak Power Handling: 400 watts
RMS Power Handling: 75 watts
Mica-filled poly cone
Vega's signature red surround
1" titanium dome tweeter
Frequency Response: 55-20,000 Hz
Top-mount Depth: 2.78"
Sensitivity: 94dB
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier + Absolute 8 Gauge Amplifier Kit
$229.95
$280.00
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier + Absolute KIT8 8 Gauge Amplifier Kit
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.
These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.