Class-D Amplifiers (339)

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier + Absolute Kit0 0 Gauge Amp Kit Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MP654+MICRO4V2+MSHXM694LK Motorsport series 6.5" Pro Compression Integrated Horn midrange 150W RMS, PAIR + 4-Channel Full Range Class D Amplifier+Harley Davidson Cut in Lid Kit  with HXM69F4 Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W670 or iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W670 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W670 iLX-W650, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W670 iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Warranty information Online product registration information FCC Compliance Statement Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HXP104 HEX 10" 700W RMS 4-Ohm Subwoofer For the ultimate sounding subwoofer, look no further than HEX PRO series. Equipped with our patented TDXTM Technology (Thermal Dyne Extreme), the motor structure is integrated into the robust cast basket aluminum frame for optimal thermal heat dissipation resulting in longer play at SPL levels, greater longevity and superior reliability! GENERAL INFORMATION  4Ω Impedance 700W RMS,1400W MAX Dual Voice Coil Mounting Diameter: 9.4 Inches / 239mm Mounting Depth: 7.5 inches / 191mm ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HXP102 HEX 10" 700W RMS 2-Ohm Subwoofer For the ultimate sounding subwoofer, look no further than HEX PRO series. Equipped with our patented TDXTM Technology (Thermal Dyne Extreme), the motor structure is integrated into the robust cast basket aluminum frame for optimal thermal heat dissipation resulting in longer play at SPL levels, greater longevity and superior reliability! GENERAL INFORMATION  2Ω Impedance 700W RMS,1400W MAX Dual Voice Coil Mounting Diameter: 9.4 Inches / 239mm Mounting Depth: 7.5 inches / 191mm ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DXM600.2D DXM 2-Channel Full Range Class D WaterPRO IPX67 RATED Waterproof multi-layer circuit boards for marine applications - Balanced differential inputs for noise-free operation regardless of the source - Full-range digital Class D technology with Direct FET power MOSFET output stage - 12dB per octave adjustable crossovers and phase control for system tuning. Selectable 3 option Auto Turn-On Mode circuit designed to work with ANY OEM head-unit, simplifies installation. GENERAL INFORMATION  170W x 6CH @ 2Ω / 110W x 6CH @ 4Ω / 340W x 3CH @ 4Ω Bridged RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 40-400Hz, 12dB Per Octave Slope Frequency Response: 10-33KHz Selectable X-Over: LPF / FULL / HPF Selectable 2CH / 6CH Input Modes Dimensions: 11.76” x 4.33” x 1.73” / 298.6 x 110 x 44.0 mm RCA Input & Speaker & Power Supply Harness Kits and Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DXM600.2D DXM 2-Channel Full Range Class D WaterPRO   IPX67 RATED Waterproof multi-layer circuit boards for marine applications - Balanced differential inputs for noise-free operation regardless of the source - Full-range digital Class D technology with Direct FET power MOSFET output stage - 12dB per octave adjustable crossovers and phase control for system tuning. Selectable 3 option Auto Turn-On Mode circuit designed to work with ANY OEM head-unit, simplifies installation. GENERAL INFORMATION  1200W x 1CH @ 1Ω / 800W x 1CH @ 2Ω / 500W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 40-250Hz (LPF), 24dB Per Octave Slope Subsonic Filter: 10-55Hz Bass Boost: 0-18dB Variable Phase Adjustment Frequency Response: 10-350Hz Dimensions: 11.76” x 4.33” x 1.73” / 298.6 x 110 x 44.0 mm RCA Input & Speaker & Power Supply Harness Kits and Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DXM600.2D DXM 2-Channel Full Range Class D WaterPRO   IPX67 RATED Waterproof multi-layer circuit boards for marine applications - Balanced differential inputs for noise-free operation regardless of the source - Full-range digital Class D technology with Direct FET power MOSFET output stage - 12dB per octave adjustable crossovers and phase control for system tuning. Selectable 3 option Auto Turn-On Mode circuit designed to work with ANY OEM head-unit, simplifies installation. GENERAL INFORMATION  200W x 4CH @ 2Ω / 125W x 4CH @ 4Ω / 400W x 2CH @ 4Ω Bridged RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 40-400Hz, 12dB Per Octave Slope Frequency Response: 10-33KHz Selectable X-Over: LPF / FULL / HPF Selectable 2CH / 4CH Input Modes Dimensions: 11.76” x 4.33” x 1.73” / 298.6 x 110 x 44.0 mm RCA Input & Line-Out, Speaker,Power Supply Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DXM600.2D DXM 2-Channel Full Range Class D WaterPRO   IPX67 RATED Waterproof multi-layer circuit boards for marine applications - Balanced differential inputs for noise-free operation regardless of the source - Full-range digital Class D technology with Direct FET power MOSFET output stage - 12dB per octave adjustable crossovers and phase control for system tuning. Selectable 3 option Auto Turn-On Mode circuit designed to work with ANY OEM head-unit, simplifies installation. GENERAL INFORMATION  300W x 2CH @ 2Ω / 200W x 2CH @ 4Ω / 600W x 1CH @ 4Ω Bridged RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 40-400Hz, 12dB Per Octave Slope Frequency Response: 10-33KHz Selectable X-Over: LPF / FULL / HPF Bass Boost: 0-18dB Dimensions: 9.5” x 4.33” x 1.73” / 241.6 x 110 x 44.0 mm RCA Input & Line-Out, Speaker,Power Supply Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio HXM1100.6D HXM 6-Channel 1100W RMS Full Range Class D Amplifier DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a small-footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. GENERAL INFORMATION  90 W x 4 + 150 W x 2 @ 4Ω 150 W x 4 + 250 W x 2 @ 2Ω 300 W x 2 @ 4Ω bridged + 500 W x 1 @ 4Ω bridged S/N: ≤ 96.7 dBA / THD: .03% Dimensions: 12.8 x 5.28 x 1.75 inches / 327v x 134 x 45 mm Remote Level Control Included Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HXM1200.1D Mono 1200W RMS Full Range Class D Sub Amplifier. DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a small-footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. GENERAL INFORMATION  550 W x 1 @ 4Ω 850 W x 1 @ 2Ω 1200 W x 1 @ 1Ω S/N: ≤ 97.4 dBA / THD: .07% Dimensions: 11.7 x 5.28 x 1.75 inches / 297 x 134 x 45 mm Remote Level Control Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.