Car Bass Restoration & Expanders (32)

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel. AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus Legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audiocontrol 3 Pin 3-pin power plug for Audio Control, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Audiocontrol 3 Pin These 3-pin connectors are used on our car and home products. If you’ve lost your connector, or if you like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 3-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States. 3 Pin, 3-pin power plug (Black) for Audio Control, Audiocontrol, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control The Epicenter & Cerwin-Vega EQ-770 Digital Bass Restoration Processor Bass Booster Expander with Remote & 7-Band Graphic EQ with Parametric E Auxiliary Input Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Cerwin-Vega EQ-770 7-Band Graphic EQ with Parametric E Auxiliary Input Just a heads up, the manufacturer's packaging and manual advertise this product as a parametric EQ. The product has a "graphic equalizer" printed on it, so that is what we are going with. EQ-770 is the most powerful equalizer. This device is equipped with several different rich sound output selections. Use the equalizer in the master channel of your audio to match the low-end, bass to full sound to your mix. Add back brilliant sounds to old digitalized recordings General Features: 7-Band Graphic Equalizer with Auxiliary Input Red illumination Master and subwoofer volume control 3 Sets of up to 7V preamp outputs (front, rear, and subwoofer) Subwoofer frequency and level control Nickel-plated RCA-level inputs Nickel-plated screw terminals Built-in fader control Authorized Internet Dealer 1-year Manufacturer's Warranty Product Specifications: Number of Bands: 7 Signal-to-noise ratio: 90dB Frequency response: 10 - 50000Hz Channel separation: 70dB What is in the EQ-770 package: EQ-770 owner's manual 7-Band Graphic Equalizer Quality Control Certificate ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control The Epicenter Concert Series Digital Bass Restoration Processor Bass Booster Expander with Remote & Absolute 4 Gauge Amp Kit Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Absolute KIT-4 Complete 4 Gauge Amplifier Kit Absolute USA Designed the Kit4 4 Gauge Premium Wiring Kit to Deliver Unrivaled Amounts of Power and Performance When Installing Your Amplifier. This 4 Gauge Wiring Kit Is Great for Powering Systems Up To 2000 Watts and Will Allow Your Amplifier to Perform at Its Full Potential. Helps You Make Connections and Brings Power to Your Radio, Subwoofers, And Speakers. High Performance and Professional Car Audio, Ideal for With Any Car Amplifier System. Product Features: Complete 4 Gauge Amplifier Kit 4-Gauge Premium CCA Wire 100% Oxygen-Free Designed Specifically for Car Audio Systems Up To 1000 Watts Premium Power and Ground Wire Provides Optimal Power Transfer Includes 2-Channel RCA Interconnect Cables for The Audio Signal Connection from the Receiver to The Amplifier Terminals Are Gold-Plated for Excellent Signal Transfer For Use in Any Car, Truck, RV, Or Boat Authorized Internet Dealer 1-Year Manufacturer's Warranty What is in the KIT4 package: 17 Ft. of Red 4 AWG High Current Power Cable 3 Ft. of Black 4 AWG Ground Cable 15 Ft. of RCA Triple Shielded Interconnect Audio Cable with Built-In Remote Wire 20 Ft. of 12 Awg Ofc Speaker Cable 20 Ft. of 16 Awg Remote Turn-On Wire 6 Ft. of Split Loom Tubing 1 Gold Plated 80 Amp AGU Fuse 1 4 Awg Gold Ring Terminal 1 4 Awg Water-Resistant Inline Fuse Holder 2 Ring Terminals 2 Spade Terminals (4 Gauge) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute BXPRO2 Digital Bass Maximizer Processor with Dash Mount Remote Control The Absolute BXPRO2 is one of the finest and most accurate bass-enhancing and restoration systems today! Enhance your listening experience with a device with several different bass output selections. The DBM-800 was also developed to restore low frequencies lost during the recording process so that your sound will always sound clean. And for your convenience, there is a dash-mounted level control unit that permits instant adjustments for your passengers who are not as much of a "bass-head" as you or whenever you need to turn it down just a little bit. General Features: Digital bass maximizer  and bass restoration processor with dash mount remote control Bass restoration lighted display, Max bass control designed to work with aftermarket and factory systems The bass output control circuit allows the unit to maximize the bass output of any audio system while restraining destructive bursts PFM Subsonic filter control to fine-tune the bass response Bass maximizer indicator, bass output control Balanced inputs, bass output control selectable grounding mode (balanced or unbalanced) Subsonic filter and bass level control preamp and speaker-level inputs switchable Programmable Frequency Match This universal product works with all Car Audio equipment such as Absolute, Cerwin Vega, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, etc. Bass Restoration Lighted Display Blue illuminated controls Parametric bass equalization The efficient bass equalization circuit 13.5V Max output level Frequency response: 10Hz - 10000Hz Balance input noise rejection: 60 dB Total harmonic distortion: 0.003%, S/N:130 dB Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute BXPRO2 Digital Bass Maximizer Processor with Dash Mount Remote Control The Absolute BXPRO2 is one of the finest and most accurate bass-enhancing and restoration systems today! Enhance your listening experience with a device with several different bass output selections. The DBM-800 was also developed to restore low frequencies lost during the recording process so that your sound will always sound clean. For your convenience, there is a dash-mounted level control unit that permits instant adjustments for your passengers who are not as much of a "bass-head" as you or whenever you need to turn it down just a little bit. General Features: Digital bass maximizer  and bass restoration processor with dash mount remote control Bass restoration lighted display, Max bass control designed to work with aftermarket and factory systems The bass output control circuit allows the unit to maximize the bass output of any audio system while restraining destructive bursts PFM Subsonic filter control to fine-tune the bass response Bass maximizer indicator, bass output control Balanced inputs, bass output control selectable grounding mode (balanced or unbalanced) Subsonic filter and bass level control preamp and speaker-level inputs switchable Programmable Frequency Match This universal product works with all Car Audio equipment such as Absolute, Cerwin Vega, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, etc. Bass Restoration Lighted Display Blue illuminated controls Parametric bass equalization The efficient bass equalization circuit 13.5V Max output level Frequency response: 10Hz - 10000Hz Balance input noise rejection: 60 dB Total harmonic distortion: 0.003%, S/N:130 dB Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Hifonics BXiPro3.0 Digital Bass Processor Epicenter 2CH Hi/Lo Converter w/ Noise Reduction The Hifonics BXiPRO3.0 Digital Bass Enhancement Processor integrates with an upgraded subwoofer system into any vehicle. Showcasing a compact design with a sleek finish, this all-in-one processor gives you 3x the power at half the size in space. With adjustable mounting solutions and multipoint installation options, including placing the processor behind dash-concealed locations, this processor will be as flexible as your installation demands. With rugged, reinforced connectors that feature Tiffany Style differential noise inputs, you’ll not only receive a processor that has superior connectivity where you need it the most, but you’ll also embrace selectable multilevel inputs and dual remote outputs (high-levels out and sub-levels out) that connect 2 different amplifiers. This processor also comes with a wired, adjustable, dash-mountable remote. General Features: BXiPro Bass Enhancer Processor with Dash Mount Remote Control Enhances and restores the bass level Screw-in power and speaker connectors to chassis for secure connections that prevent disconnection Dual-function bass remote Remote wire input, DC sense, and music sense turn on Input and output signal clip indicators Mono adjustable output level (can be controlled by bass remote) 48v high-level inputs Ability to use test tones to set input and output levels Fine-tuning adjustability using bass width and sweep Fixed 4v full range output Small profile Tiffany-style RCA connectors Low and high-level audio inputs (speaker-level inputs) Balanced differential inputs (for noise reduction) Authorized Internet Dealer 1-year Manufacturer's Warranty Functions & Operations: Adjustable bass enhancement preamp output Bass remote input Preamp full range output Adjustable bass level output Adjustable bass width and sweep adjustments Output level control with clip indicators Input level control with clip indicators Selectable input level range (RCA or speaker level) Selectable turn on the trigger (remote wire input, DC sense, and signal sense) Low-level inputs (RCA level) High-level input (speaker level) Power connector with two remote output trigger wires Dual concentric bass knob (A. bass level, B. output level) Product Specifications: Fuse value: 1A mini ATC Voltage range: 9.5V -15V Bass remote type: HF-U-02 Fixed voltage output full range: 4V Adjustable subwoofer output voltage: 0V -9V Maximally Flat Frequency Response Main: (-3dB) 10Hz to >50kHz Input Impedance Low-level inputs: 20k Ohms Input Impedance High-level inputs: 20k Ohms Maximum high-level Input Voltage on any input before clipping: >48V Maximum Output voltage at 1.0% THD+N (subwoofer output): 9.0V Signal to Noise Ratio (ref to 2Vrms out, unity gain): -84.0dBA EQ boost: Variable to +8.1dB Unit turn on options: 30mV High-Level Audio, 59mV RCA Audio, 2.2V DC Offset Current Draw: 0.32A Turn on Delay Time: 0.1 seconds Setup test tone track: 100 Hz & 1000Hz Dimensions: 109mm W x134mm D x 30.5mm H Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AudioControl LC2i PRO 2-channel line output converter+ Free Absolute Electrical Tape+ Phone Holderr High-level input line output converter More and more aftermarket amplifier installations depend on using the factory amp's powered outputs for its inputs. AudioControl's LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp. Bass feature Some factory radios dial down the bass as you increase the volume to protect the flimsy factory speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS™ circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest. Installation conveniences The included dash-mount wired remote control allows you to adjust the level of your subchannel on the go. Load selection switches make OEM integration easier, so the LC2i PRO will work with almost any factory sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sense, or remote 12-volt inputs. Product highlights: 2-channel active line output converter ACR-1 wired remote bass level control included Two speaker-level inputs with 40-volt (400 watts RMS) power handling Main and Bass preamp-level outputs (up to 9.5 volts) Main and Bass output controls for level matching adjustable AccuBASS corrects for factory bass roll-off More Info: selectable turn-on options: GTO signal Sense (DC offset), audio sense, or remote 12-volt input 12-volt turn-on lead output recommended fuse rating: 1 amp dimensions: 6-15/16"W x 1"H x 3"D weight: 0.75 pound warranty: 5 years Two-channel line output converter Two 4-pin captive-screw connectors (installed) ACR-1 Level control 16.5' Level-control cable (RJ-14) Quickstart guide (on cardboard label) Absolute BT1700 Vinyl Electrical Tape is a high-quality, multi-purpose vinyl insulating tape that is highly resistant to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable. Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds It withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified Specifications Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.