Amplifier Bass & Level Remotes (14)

Alpine RUX-H02 Halo wireless volume knob and subwoofer level controller for Alpine Halo and select Restyle receivers. Rotary volume and bass control for Alpine Halo receivers...Alpine's RUX-H02 Halo level controller lets you add a knob to your new Alpine touchscreen stereo so you can crank the overall volume or bass as your ancestors did — with a righteous flick of the wrist. This knob matches the rounded corners and beveled-edge styling of your Halo receiver. It attaches to its floating screen, holding the control correctly for handy adjustments from the driver's seat. You can control the bass by pushing the knob in as you twist. ...without wires!The RUX-H02 incorporates advanced Bluetooth® Low Energy technology to command the action without running another wire from your dash to the back of the receiver or sub-amplifier (if your system has an amp). A blue LED light lets you know the knob's active and ready to pair with your receiver. The RUX-H02's powered by a compact lithium battery that can be easily replaced.The RUX-H02 knob works with the Alpine iLX-F509 Halo9 and iLX-F511 Halo11 receivers, along with the i509-WRA-JK and i509-WRA-JL Restyle receivers for Jeep Wrangler and Gladiator models and the iLX-507 digital multimedia receiver.General Features: remote level controller for select Alpine touchscreen receivers built-in Bluetooth LE technology for wireless operations replaceable lithium CR2025 battery cell Blue LED indicator controls volume and subwoofer level turn left/right to change the volume push in a while, turning left/right to change sub level mounts to an Alpine Halo receiver with included mounting hardware works with the following Alpine receivers: iLX-507 iLX-F509 iLX-F511 i509-WRA-JK i509-WRA-JL What's in the RUX-H02 package: RUX-H02 owner's manual Wireless remote knob CR2032 3V battery Metal bracket Plastic bracket 2 Philips-head screws 2 Flat-head screws ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As more and more newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming absolutely crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may not be just as simple as adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies which makes it difficult to improve on sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S comes with an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. The controller adds quick adjustability to your system if needed or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov    

Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8 As more and more newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming absolutely crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may not be just as simple as adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies which makes it difficult to improve on sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building. The PXE-0850S comes with an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. The controller adds quick adjustability to your system if needed or it can be left out altogether if smartphone control is enough. General Features: Music & navigation sound mixing Can arbitrarily adjust the volume ratio of main/sub audio source Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time. Split-screen display, adding delay group, more convenient operation! Total volume adjustment Bass volume adjustment Sound source switching Auxiliary sound source switching EQ preset switching Frequency response: 20Hz - 20KHz Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input Outputs: 8 x 25W (Rated power), 12-channel RCA output 2.0 multichannel surround 31 Bands parametric EQ Hi-pass / Low-pass / Bandpass Crossover Time delays up to 20 MS per channel Input/output frequency summing Music & navigation sound mixing Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov    

 2 Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the PLC2 box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting knob without its housing) Additional front panel Flat washer Nut PLC2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine RUX-H01 Halo Remote Bass Knob For Halo and Select Alpine Amplifiers Make quick bass adjustments with the Remote Bass Knob designed to attach directly to the Alpine Halo display. General Features: Can be mounted to the iLX-f411 or used remotely from anywhere in the vehicle Adjust Gain from 0 - 12 DB Multi-Amp Capable (Standard Phone Cable Splitter Required, Not Included) Remote Bass Knob for the Alpine Halo Display Fits the iLX-F259, iLX-F309, and iLX-F411 9-inch and 11-inch screen Compatible with the X-A90M, X-A90V, R-A90S, R-A75M, R-A60M, S-A55V, PDX-V9, KTA-200M Also compatible with the X-A70F, R-A60F, and S-A32F in 3-channel mode for level control on channel 3 or 4 when bridged Authorized Internet Dealer ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers General Features: Remote Bass Level Control Knob 16-1/2" (5 meters) Connection cable Plugs directly in for quick direct subwoofer control Specifically designed as the controller for use with any of the following PDX Amplifiers: PDX-M12, and PDX-M6 Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB controller Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the package: Alpine Remote Bass Level Control module 16.4'  connecting cable  4 Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the PLC2 box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting knob without its housing) Additional front panel Flat washer Nut PLC2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting knob without its housing) Additional front panel Flat washer Nut Rockford Fosgate PLC2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

4 x Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the PLC2 box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting knob without its housing) Additional front panel Flat washer Nut PLC2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the PLC2box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting knob without its housing) Additional front panel Flat washer Nut PLC2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov