All Car Amplifiers (414)

Hifonics ZD-3350.1D 3350 Watt RMS Zeus Delta Series Class-D Monoblock Car Amplifier THE Hifonics ZEUS DELTA monoblock amplifier delivers 3350 watts, which features PWM MOSFET power supply for maximum current levels. General Features: Class D Stable Monoblock Amplifier RMS Power Rating @4 ohms: 850 watts x 1 channel RMS Power Rating @2 ohms: 1675 watts x 1 channel RMS Power Rating @1 ohm: 3350 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Wired remote bass level control included Soft start turn-on Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 15 - 250 Hz Onboard electronic crossover Total Harmonic Distortion (THD): Variable low-pass filter: 50 - 250 Hz Subsonic filter: 15 - 40 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 175A Onboard electronic crossover 4 AWG gauge power and ground wiring is recommended for installation. Dimensions: 6.89" W x 20.27" L x 3.15" H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier + Absolute KIT4 4 Gauge Amp Kit The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash. General Features: Mono subwoofer amplifier 1500W Mono Amplifier  RMS Power Output: 700W x 1 @ 4Ω RMS Power Output: 1200W x 1 @ 2Ω RMS Power Output: 1500W x 1 @ 1Ω Class D Amplifier Circuit Preamp and speaker-level inputs Variable bass boost Power Rating: 14.4V, ≤ 1% THD +N The amp includes preamp- and speaker-level inputs Install almost any vehicle, even one with a factory radio Frequency Response: 20Hz – 400Hz S/N Ratio: >75dB optional RUX-KNOB.2 wired remote level control Dimensions: 13.5” W x 2.6” H x 7.3” D What is in the R2-A150M package: Alpine R2-A150M owner's manual Mono subwoofer amplifier Four 1" pan-head screws 3mm Allen key 2.5mm Allen key Owner's manual  Alpine Verification Certificate Warranty information Power supply note Online product registration information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier + Absolute KIT0 0 Gauge Amp Kit The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash. General Features: Mono subwoofer amplifier 1500W Mono Amplifier  RMS Power Output: 700W x 1 @ 4Ω RMS Power Output: 1200W x 1 @ 2Ω RMS Power Output: 1500W x 1 @ 1Ω Class D Amplifier Circuit Preamp and speaker-level inputs Variable bass boost Power Rating: 14.4V, ≤ 1% THD +N The amp includes preamp- and speaker-level inputs Install almost any vehicle, even one with a factory radio Frequency Response: 20Hz – 400Hz S/N Ratio: >75dB optional RUX-KNOB.2 wired remote level control Dimensions: 13.5” W x 2.6” H x 7.3” D What is in the R2-A150M package: Alpine R2-A150M owner's manual Mono subwoofer amplifier Four 1" pan-head screws 3mm Allen key 2.5mm Allen key Owner's manual  Alpine Verification Certificate Warranty information Power supply note Online product registration information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier  + Alpine RUX-KNOB.2 Remote Bass Level Control Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier  + Alpine RUX-H01 Halo Bass Knob Remote Bass Level Control Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Alpine RUX-H01 Halo Bass Knob Remote Bass Level Control The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Alpine RUX-KNOB.2 Remote Bass Level Control The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Absolute KIT0 0 Gauge Amp Kit Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Absolute KIT4 4 Gauge Amp Kit Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier  Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M package: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT0 0 Gauge Amp Kit The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT4 4 Gauge Amp Kit The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.