00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MB Quart RA1-280.4 Reference 4-Channel 280 Watt Max Car Audio Speaker Amplifier
$199.95
$300.00
MB Quart RA1-280.4 Reference 4-Channel 280 Watt Max Car Audio Speaker Amplifier
MB Quart Reference series four-channel car audio amplifier featuring innovative sound quality and power technology. The RA1-280.4 is a 280-watt car audio amplifier. Reference amplifiers feature DC Sensing, allowing any amplifier to be easily integrated into an OEM system by simply adapting an RCA cable from the source unit.
General Features:
Reference Series Series RA1-280.4
Class D 4 Ohm Stable 4-Channel Amplifier
RMS Power Rating @ 4 ohms: 50 watts x 4 channel
RMS Power Rating @ 2 ohms: 70 watts x 4 channel
RMS Power Rating Bridged, 4 ohms: 140 watts x 2 channel
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Variable high-pass filter: 50 - 250 Hz, 24 dB/octave
Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
Variable Bass Boost: 0 - 9 dB bass boost at 50 Hz
Fuse Rating: 40A
4 AWG gauge power and ground wiring is recommended for installation.
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the RA1-280.4 package:
RA1-280.4 Owner's manual
4-channel amplifier
4mm Hex key
2mm Hex key
Four 5/8" screws
MB Quart logo badge
Quickstart guide
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
$599.95
$1,000.00
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash.
General Features:
Mono subwoofer amplifier
1500W Mono Amplifier
RMS Power Output: 700W x 1 @ 4Ω
RMS Power Output: 1200W x 1 @ 2Ω
RMS Power Output: 1500W x 1 @ 1Ω
Class D Amplifier Circuit
Preamp and speaker-level inputs
Variable bass boost
Power Rating: 14.4V, ≤ 1% THD +N
The amp includes preamp- and speaker-level inputs
Install almost any vehicle, even one with a factory radio
Frequency Response: 20Hz – 400Hz
S/N Ratio: >75dB
optional RUX-KNOB.2 wired remote level control
Dimensions: 13.5” W x 2.6” H x 7.3” D
What is in the R2-A150M package:
Alpine R2-A150M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier + 4 Gauge Amp Kit
$429.95
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier + Ansolute KIT4 4 Gauge AMP Kit
Alpine introduces the all-new S-Series amplifiers - a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier + 0 Gauge Amp Kit
$439.95
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier + Ansolute KIT0 0 Gauge AMP Kit
Alpine introduces the all-new S-Series amplifiers - a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier
$399.95
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier
Alpine introduces the all-new S-Series amplifiers - a perfect match for the speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream TXP4.3500D Tarantula XP Series 3500W 4Ch - High Output Amplifier
$179.99
$319.98
Soundstream TXP4.3500D Tarantula XP Series 3500W 4Ch - High Output Amplifier
General Features:
1-ohm Stereo & 2-ohm Bridged Full Range Operation
LED Accent Lighting Illuminates Circuit Board, for Your Viewing Pleasure
Silicone Steel Alloy Core Power Supply Transformers & Flux Capacitors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AUTOTEK MM-1525.5D 1500 Watt Compact 5 Channel Amplifier
$299.99
$599.98
AUTOTEK MM-1525.5D 1500 Watt Compact 5-Channel Amplifier
General Features:
1,500-Watt Max Power
1 Channel X 800 Watts Sub Only At 1 Ohm
4 Channels X 150 Watts + 1 Channel X 400 Watts At 2 Ohms
4 Channels X 150 Watts + 1 Channel X 200 Watts At 4 Ohms
Aftermarket Class D Amp Replaces Or Supplements Vehicle’S Existing Oem Amp To Power Car’S Stereo Speakers
Can Run In 4-Channel Or Mono Mode
Drives Additional Power With A Small Footprint
Frequency Response: 10 Hz To 22 kHz
Total Harmonic Distortion (Thd) Less Than 0.1%
Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High-Speed Mosfets Bring Extreme Power With High Sound Quality And Minimum Distortion Levels
Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display And Showcase For Every Car Audio Installation
Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure Connection While Resisting Corrosion
Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And Secure Connections
Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low Voltage Circuit Which Delivers Minimal Distortion Through Amplification Process
RCA Preamp Audio Outputs And Speaker Level Audio Inputs
RCA Inputs And Outputs Provide the Highest Sound Quality Connection
Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The "Output" Rca Connections, Which Minimize The Need For Additional Cables Running The Length Of The Vehicle, Minimizing Noise
Onboard Variable Electronic Crossover 12 Db Per Octave
Built-In Bass Control
Amp Variable Low Pass: 40 Hz To 300 Hz
Amp Bass Boost 0 Db To 12 Db
Amp Subsonic Filter 10 Hz To 40 Hz
High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal Impact On Electrical System
Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp End Panel
Power Terminal 12-Volt/Gnd: 4 Awg
Speaker Terminal Wire Gauge: 12 AWG
Amp Fusing: External 100 Amps
Dimensions: 18 In. X 7 In. X 3.25 In.
Includes Wired Bass Remote, Mounting Hardware, and Manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
$249.95
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
$599.95
$1,000.00
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash.
General Features:
Mono subwoofer amplifier
1500W Mono Amplifier
RMS Power Output: 700W x 1 @ 4Ω
RMS Power Output: 1200W x 1 @ 2Ω
RMS Power Output: 1500W x 1 @ 1Ω
Class D Amplifier Circuit
Preamp and speaker-level inputs
Variable bass boost
Power Rating: 14.4V, ≤ 1% THD +N
The amp includes preamp- and speaker-level inputs
Install almost any vehicle, even one with a factory radio
Frequency Response: 20Hz – 400Hz
S/N Ratio: >75dB
optional RUX-KNOB.2 wired remote level control
Dimensions: 13.5” W x 2.6” H x 7.3” D
What is in the R2-A150M package:
Alpine R2-A150M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega VCU84 1200 Watts Class D Marine Amplifier with Remote Bass Knob Control + 4gauge Amp Kit
$399.99
$799.99
Cerwin Vega VCU84 Class D Marine Amplifier with Remote Bass Knob Control, 1200 watts Max Power Output, 4 Channel Amplifier, Red and Black + Absolute KIT4 4 Gauge Amp KitGeneral Features:
Cerwin Vega Micro Series VCU84
Class-D Full Range 4-Ohm Stable 4-Channel Amplifier
RMS Power Rating 4 ohms: 80 watts x 4 channel
RMS Power Rating 2 ohms: 150 watts x 4 channel
Bridged, 4 ohms: 300 watts x 2 channel
Total power output: 550 watts
Compact Universal All-Weather Application
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
High-Power Digital Class D Advanced Technology IR Chipset
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
2/4 channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat sink for extreme heat dissipation
Input sensitivity: 200mV-10V
Frequency Response: 10 - 30000 Hz
Total Harmonic Distortion (THD): 0.5%
Signal Noise Ratio: >85 dB
Channel Separation: >55 dB
Variable high-pass filter: 40 - 400 Hz, 24 dB/octave
Variable low-pass filter: 40 - 400 Hz, 24 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
Fuse Rating: 40 A x 2
8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
Dimensions: 4.02"W x 8.8"L x 1.4"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega VCU84 1200 Watts Class D Marine Amplifier with Remote Bass Knob Control
$379.99
$759.99
Cerwin Vega VCU84 Class D Marine Amplifier with Remote Bass Knob Control, 1200 watts Max Power Output, 4 Channel Amplifier, Red and BlackGeneral Features:
Cerwin Vega Micro Series VCU84
Class-D Full Range 4-Ohm Stable 4-Channel Amplifier
RMS Power Rating 4 ohms: 80 watts x 4 channel
RMS Power Rating 2 ohms: 150 watts x 4 channel
Bridged, 4 ohms: 300 watts x 2 channel
Total power output: 550 watts
Compact Universal All-Weather Application
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
High-Power Digital Class D Advanced Technology IR Chipset
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
2/4 channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat sink for extreme heat dissipation
Input sensitivity: 200mV-10V
Frequency Response: 10 - 30000 Hz
Total Harmonic Distortion (THD): 0.5%
Signal Noise Ratio: >85 dB
Channel Separation: >55 dB
Variable high-pass filter: 40 - 400 Hz, 24 dB/octave
Variable low-pass filter: 40 - 400 Hz, 24 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
Fuse Rating: 40 A x 2
8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
Dimensions: 4.02"W x 8.8"L x 1.4"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream AR1-10000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
$229.99
$299.98
Soundstream AR1-10000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
Arachnid Amplifiers are the next step in performance and value. Taking advantage of our tried-and-true Class A/B Full Range and Improved Efficient Class-D Monoblock available platforms. Arachnid Series continues down the road of reliability and longevity you expect from us. Boosting a small electrical audio signal to a much higher voltage capable of driving speakers and subwoofers. Most vehicles’ standard systems can’t offer this high-power output that pushes your audio system to high volumes and precision like the Arachnid Series Amplifiers can.
General Features:
10,000W Monoblock Class D Arachnid Series Car Amplifier with Bass Remote
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs
Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
12dB Bass Boost Increases Low Octave Harmonics
Dash Mount Gain Control Module Included
MAX Power: 10,000w
RMS Power 4Ω: 1,000 x 1
RMS Power 2Ω: 1,800 x 1
RMS Power 1Ω: 3,000w x 1
Remote Gain Control: Included
Dimensions 8.75” D x 2.25” H: 17.50” W
3-Year Warranty Manufacture Warranty
⚠️Warning: This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.