All Car Amplifiers (591)

Alpine HDA-F60 Status HDA-F60 Hi-Res 4-Channel Amplifier, 100W x 4 at 4-Ohm, 150W x 4 at 2-Ohm With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) 4-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick-connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 100W x 4 @ 4Ω 150W x 4 @ 2Ω Bridged: 300W x 2 @ 4Ω THD+N: 0.02% (10W into 4 ohm) S/N Ratio: 87dB (1W into 4 ohm) Frequency response: 10-60kHz (-3dB) Damping factor: 500 Selectable input level – HI/LO Selectable 2/4ch input Variable High pass / Low pass crossover Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-F60 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-F60 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 83dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the speakers for ultimate reliability. Easy Installation The HDA-F60 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to controls on the amplifier. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-V90 Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) 5-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick-connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 75W x 4 + 300W x 1 @ 4Ω 100W x 4 + 500W x 1 @ 2Ω Bridged: 200W x 2 @ 4Ω (ch1/2, ch3/4 only) THD+N: 0.02% (10W into 4 ohms) S/N Ratio: 87dB (1W into 4 ohms) Frequency response: 8-60kHz (-3dB) Damping factor: 500 (ch1/2/3/4), 1000 (subwoofer) Selectable input level – HI/LO Selectable 2/4/6ch input Variable High pass / Low pass crossover Variable Subsonic filter (subwoofer) Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-V90 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-V90 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 87dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the speakers and subwoofers for ultimate reliability. Easy Installation The HDA-V90 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to controls on the amplifier. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin-Vega XED6001D 600W RMS Class D XED Series Monoblock Car Amplifier with Bass Remote The Cerwin-Vega XED6001D XED Series Amplifier is your ticket to high-performance car audio with power, precision, and reliability. Designed with Xtreme Energy Design, these amplifiers are engineered to take your sound system to the next level, delivering exceptional power and efficiency for every beat. This unit is crafted with premium components for consistent, reliable operation. This is also ideal for high-power audio systems, effortlessly driving subwoofers and speakers with clean, distortion-free sound. The XED Series Amplifiers are built for those who crave deep bass, crisp highs, and seamless mids. With their cutting-edge technology and meticulous craftsmanship, they deliver the power and clarity needed to make every drive an immersive audio experience. General Features: XED Series Class D 2 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohm: 320 watts x 1 channel 2 ohm: 600 watts x 1 channel Total power output: 600 watts LED Power/Protect Light Wired bass level remote control included Speaker level (high level) input Signal-sensing remote turn-on Thermal, overload, and speaker short protection Compact size with Ambient backlit logo and aluminum chassis Gain, subsonic, LPF crossover, and bass boost adjustment Input sensitivity: Low level: 250mV - 6 volts High level: 1.1 - 20 volts Frequency Response: 10 - 250 Hz Total Harmonic Distortion (THD): <0.1% Signal to Noise Ratio: 101.1 dB Variable low-pass filter: 30 - 250 Hz Subsonic filter: 10 - 50 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 7.1" L x 4.7" W x 1.8" H Authorized Internet Dealer 1-year Manufacturer's Warranty  Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000W DVC 4-Ohm &  KIT4 4 Gauge Amp Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2000 DVC4 General Features: 10" / 254mm Shallow Subwoofer 2000 Watts MAX Power 700 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 4.48" / 114 mm Shallow Design Mounting Depth 84dB Sensitivity (1w/1m) 20 - 800 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.9L / 0.032ft3 Displacement Volume  Recommended Sealed Box: 14.2L / 0.50 Cubic Feet  Recommended Ported Box: 14.2L /0.50 Cubic Feet 9.25" / 235 mm Front Mount Baffle Cutout 3.66" / 93 mm Mounting Depth 6" / 154 mm Motor Diameter 15 lb Weight 13 x 13 x 8.5 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500W DVC 4-Ohm Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2500 DVC4 General Features: 12" / 304.8mm Shallow Subwoofer 2500 Watts MAX Power 800 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 5" / 129 mm Shallow Design Mounting Depth 85dB Sensitivity (1w/1m) 20 - 600 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.93L / 0.033ft3 Displacement Volume  Recommended Sealed Box: 28L / 1 Cubic Feet  Recommended Ported Box: 28L / 1 Cubic Feet 10.79" / 274 mm Front Mount Baffle Cutout 4.33" / 110 mm Mounting Depth 6.3" / 160 mm Motor Diameter 16.5 lb Weight 15 x 15 x 9 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000W DVC 4-Ohm Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2000 DVC4 General Features: 10" / 254mm Shallow Subwoofer 2000 Watts MAX Power 700 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 4.48" / 114 mm Shallow Design Mounting Depth 84dB Sensitivity (1w/1m) 20 - 800 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.9L / 0.032ft3 Displacement Volume  Recommended Sealed Box: 14.2L / 0.50 Cubic Feet  Recommended Ported Box: 14.2L /0.50 Cubic Feet 9.25" / 235 mm Front Mount Baffle Cutout 3.66" / 93 mm Mounting Depth 6" / 154 mm Motor Diameter 15 lb Weight 13 x 13 x 8.5 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500W DVC 4-Ohm Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2500 DVC4 General Features: 12" / 304.8mm Shallow Subwoofer 2500 Watts MAX Power 800 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 5" / 129 mm Shallow Design Mounting Depth 85dB Sensitivity (1w/1m) 20 - 600 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.93L / 0.033ft3 Displacement Volume  Recommended Sealed Box: 28L / 1 Cubic Feet  Recommended Ported Box: 28L / 1 Cubic Feet 10.79" / 274 mm Front Mount Baffle Cutout 4.33" / 110 mm Mounting Depth 6.3" / 160 mm Motor Diameter 16.5 lb Weight 15 x 15 x 9 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & 2 DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000W DVC 4-Ohm Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2000 DVC4 General Features: 10" / 254mm Shallow Subwoofer 2000 Watts MAX Power 700 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 4.48" / 114 mm Shallow Design Mounting Depth 84dB Sensitivity (1w/1m) 20 - 800 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.9L / 0.032ft3 Displacement Volume  Recommended Sealed Box: 14.2L / 0.50 Cubic Feet  Recommended Ported Box: 14.2L /0.50 Cubic Feet 9.25" / 235 mm Front Mount Baffle Cutout 3.66" / 93 mm Mounting Depth 6" / 154 mm Motor Diameter 15 lb Weight 13 x 13 x 8.5 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & 2 DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000W DVC 4-Ohm &  KIT4 4 Gauge Amp Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2000 10" Shallow-Mount Fiber Glass Subwoofer 2000 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2000 DVC4 General Features: 10" / 254mm Shallow Subwoofer 2000 Watts MAX Power 700 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 4.48" / 114 mm Shallow Design Mounting Depth 84dB Sensitivity (1w/1m) 20 - 800 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.9L / 0.032ft3 Displacement Volume  Recommended Sealed Box: 14.2L / 0.50 Cubic Feet  Recommended Ported Box: 14.2L /0.50 Cubic Feet 9.25" / 235 mm Front Mount Baffle Cutout 3.66" / 93 mm Mounting Depth 6" / 154 mm Motor Diameter 15 lb Weight 13 x 13 x 8.5 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & 2 DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500W DVC 4-Ohm &  KIT4 4 Gauge Amp Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2500 DVC4 General Features: 12" / 304.8mm Shallow Subwoofer 2500 Watts MAX Power 800 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 5" / 129 mm Shallow Design Mounting Depth 85dB Sensitivity (1w/1m) 20 - 600 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.93L / 0.033ft3 Displacement Volume  Recommended Sealed Box: 28L / 1 Cubic Feet  Recommended Ported Box: 28L / 1 Cubic Feet 10.79" / 274 mm Front Mount Baffle Cutout 4.33" / 110 mm Mounting Depth 6.3" / 160 mm Motor Diameter 16.5 lb Weight 15 x 15 x 9 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier & 2 DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500W DVC 4-Ohm Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier delivers Alpine-level power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp provides high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono-channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs DC Sound DSW2500 12" Shallow-Mount Fiber Glass Subwoofer 2500 Watts Dual 2.5" Voice Coil 4-Ohm Unleash Big Sound in Small Spaces – DC Sound DSW2500 DVC4 General Features: 12" / 304.8mm Shallow Subwoofer 2500 Watts MAX Power 800 Watts RMS Power 4 ohms Nominal Impedance Aluminum Basket 2.5" / 63.5mm Voice Coil Diameter 62 Oz Magnet Weight Ferrite Magnet Aluminum Voice Coil Former Material Copper Winding Voice Coil Material Paper Cone Material High Roll Rubber Surround Type Fiberglass Dust Cap Material 5" / 129 mm Shallow Design Mounting Depth 85dB Sensitivity (1w/1m) 20 - 600 Hz Frequency Response 20L / 0.7 ft3 Equivalent Volume Vas 38 Hz Free Air Resonance Fs 90 Hz Recommended Low Pass Crossover 0.93L / 0.033ft3 Displacement Volume  Recommended Sealed Box: 28L / 1 Cubic Feet  Recommended Ported Box: 28L / 1 Cubic Feet 10.79" / 274 mm Front Mount Baffle Cutout 4.33" / 110 mm Mounting Depth 6.3" / 160 mm Motor Diameter 16.5 lb Weight 15 x 15 x 9 W x L x H (Inches) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.