00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate T2500-1bdCP mono sub amplifier 2500W RMS x 1 at 2 ohms
$1,449.99
$2,229.99
Rockford Fosgate T2500-1bdCP Power Series mono sub amplifier 2,500 Watts RMS x 1 at 2 ohms
The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, efficiently driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!
Product highlights:
mono subwoofer amplifier
1,500 watts RMS x 1 at 4 ohms (2,500 watts RMS x 1 at 2 ohms)
2,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
Master Sync: allows two of these amps to be tied together
variable low-pass filter (32-250 Hz, 24 dB/octave)
selectable subsonic filter (28Hz, 12 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
preamp inputs and outputs
1/0-gauge power and ground leads and an 250-amp fuse recommended — wiring and hardware not included with amplifier
No onboard fuses — when installing multiple amps in a system, an additional 250-amp in-line fuse between the distribution block and the amplifier is recommended
21-7/8"W x 2-3/16"H x 9-7/16"D
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Prime R1200-1D 1200W Class-D Monoblock 1-Ohm Amplifier
$429.99
$679.99
Rockford Fosgate Prime R1200-1D 1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers. The Prime R1200-1D subwoofer amplifier delivers high efficiency through its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers, featuring an infrasonic filter to prevent ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.
General Features:
Rockford Fosgate Prime Series R1200-1D
Class-D 1-Ohm Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 400 watts x 1 channel
RMS Power Rating: 2 ohms: 800 watts x 1 channel
RMS Power Rating: 1 ohm: 1200 watts x 1 channel
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy-duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity: 150mV - 4V
Frequency Response: 20 - 250Hz
Total Harmonic Distortion (THD): <1.0%
Signal to Noise Ratio: 100dB
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
Subsonic (infrasonic) filter: 15 - 40 Hz, 12 dB/octave
Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz
Fuse Rating: 150A x 1 (recommended, not included)
12 AWG speaker wire gauge outputs
4-gauge power and ground wiring is recommended for installation
Weight: 7.825 lbs
Dimensions: 11.06"W x 6.77"L x 1.97"H
Also Found As Prime 1200 Watt, R12001D, R1200, R12001
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate R250X4 Prime 250 Watts 4-Channel Amplifier + 4 Gauge Amp Kit
$299.99
$800.00
Rockford Fosgate Prime Series R250X4 250 Watts RMS, 4-Channel Class AB Car Audio Amplifier + Absolute 4 Gauge Amp KitThe Prime R250X4 is a 250-watt 4-channel amplifier capable of running 2-Ohms stereo on all channels and 4-Ohms bridged/mono on the rear channels. Includes on-board Punch Bass and front/rear crossover controls. The Prime R250X4 is a 4-Channel amplifier perfect for any Car Audio Fanatic getting into mobile audio wanting a single amplifier to run a complete audio system. This amplifier features selectable Punch Bass to tune low frequencies, variable crossovers to either protect your high-frequency speakers or feeding only bass to your subwoofers.General Features:
4-channel car amplifier
40 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
125 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
CEA-2006 Compliant
variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
selectable bass boost (0, 6, 12 dB at 45 Hz)
Class-AB amplifier design
MOSFET power supply
frequency response: 20-20K Hz
preamp and speaker-level inputs
8-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and this amplifier is recommended
Dimensions: 11-1/4"W x 2-1/16"H x 6-13/16"D
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TM1.6000D 6000W Class D Trax Micro Series Monoblock Amplifier
$154.99
$240.80
Precision Power TM1.6000D 6000W Peak Class D Trax Micro Series Monoblock Amplifier
General Features:
Trax Micro Series Class D Stable Monoblock Amplifier
Total peak power output: 6000 watts
LED Power/Protect Light
Wired bass level remote control included
Speaker-level (high-level) inputs
Signal sensing remote turn-on
Thermal, overload, and speaker short protection
Compact and space saving design
Fits behind truck, seats, or wheel wells
Variable low-pass filter: 35 - 250 Hz
Subsonic filter: 10 - 50 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 50A
4 AWG gauge amplifier wiring kit is recommended for installation
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TM1.4000D 4000W Class D Trax Micro Series Monoblock Amplifier
$119.99
$166.40
Precision Power TM1.4000D 4000W Peak Class D Trax Micro Series Monoblock Amplifier
General Features:
Trax Micro Series Class D Stable Monoblock Amplifier
Total peak power output: 4000 watts
LED Power/Protect Light
Wired bass level remote control included
Speaker-level (high-level) inputs
Signal sensing remote turn-on
Thermal, overload, and speaker short protection
Compact and space saving design
Fits behind truck, seats, or wheel wells
Variable low-pass filter: 35 - 250 Hz
Subsonic filter: 10 - 50 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 50A
4 AWG gauge amplifier wiring kit is recommended for installation
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TM1.3000D 3000W Class D Trax Micro Series Monoblock Amplifier
$119.99
$147.80
Precision Power TM1.3000D 3000W Peak (1500W RMS) Class D Trax Micro Series Monoblock Amplifier
General Features:
Trax Micro Series Class D 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohm: 1000 watts x 1 channel
2 ohm: 1500 watts x 1 channel
Total RMS power output: 1500 watts
LED power (green) / protect (red) light indicator
Wired bass level remote control included
1 pair of pre-amp outputs
Signal sensing remote turn-on
Thermal, overload, and speaker short protection
Pulse Width Modulated MOSFET power supply
Preamp RCA outputs to daisy chain multiple amps
Dual speaker terminals simplify hooking multiple speakers
Heavy duty aluminum alloy heat-sink
Low Level Input sensitivity: 0.2 - 6 volts
Variable low-pass filter: 35 - 300 Hz
Subsonic filter: 10 - 50 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 75A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 16.5" L x 9.75" W x 2.50" H
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TM1.2000D 2000W Class D Trax Micro Series Monoblock Amplifier
$89.99
$125.80
Precision Power TM1.2000D 2000W Peak Class D Trax Micro Series Monoblock Amplifier
General Features:
Trax Micro Series Class D Stable Monoblock Amplifier
Total peak power output: 2000 watts
LED Power/Protect Light
Wired bass level remote control included
Speaker-level (high-level) inputs
Signal sensing remote turn-on
Thermal, overload, and speaker short protection
Compact and space saving design
Fits behind truck, seats, or wheel wells
Input sensitivity:
Low level: 0.25 - 8 volts
High level: 0.25 - 8 volts
Frequency Response: 10 - 250 Hz
Variable low-pass filter: 32 - 350 Hz
Subsonic filter: 15 - 50 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 50A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: L x W x H
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TM4.2000D 2000W Class D Trax Micro 4-Channel Micro Car Amplifier
$109.99
$128.60
Precision Power TM4.2000D 2000W Peak Class D Trax Micro Series 4-Channel Micro Car Amplifier
General Features:
Trax Micro Series Class D Stable 4-Channel Amplifier
RMS Power Rating:
4 ohm: 100 watts x 4 channel
2 ohm: 150 watts x 4 channel
Bridged: 400 watts x 2 channel @ 4 ohm
Total power output: 2000 watts
LED power and protect light
Speaker-level (high-level) inputs
2 pairs of pre-amp outputs
Signal-sensing remote turn-on
3-way protection circuitry (thermal, overload, and speaker short protection)
Input sensitivity:
Low level: 250 mV - 8 volts
High level: 250 mV - 8 volts
Frequency Response: 10 - 250 Hz
Fuse Rating: 50A
1/0 AWG gauge amplifier wiring kit is recommended for installation
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TRAX1.3000D 3000W Trax 2 ohm Stable Monoblock Class-D Amplifier
$159.99
$212.00
Precision Power TRAX1.3000D 3000W Max (1500W RMS) Trax Series 2 ohm Stable Monoblock Class-D Amplifier
General Features:
Precision Power Trax Series TRAX1.3000D
Class-D 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 1000 watts x 1 chan.
2 ohms: 1500 watts x 1 chan.
1 ohm: _ watts x _ chan.
Total power output: 3000 watts
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty aluminum alloy heat-sink
Input sensitivity: 200mV - 6V
Variable low-pass filter: 32 - 300Hz
Subsonic filter: 10 - 50Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 25A x 3
Specifications:
Power Specifications - Full Range Channels:
RMS Power @ 4 ohms: 1000 watts x 1 channels
RMS Power @ 2 ohms: 1500 watts x 1 channels
Amplifier Specifications:
Amplifier Series: Trax
Amplifier Class: D
Number of Channels: 1 - Mono
Total Peak Power Output: 3000 watts
Total RMS Power Output: 1500 watts
Maximum Input Gauge Size: 4 AWG
Minimum Impedance Unbridged: 2 ohms
Speaker Level Inputs: No
Preamp Outputs: 1 pair
Built-in Crossover: Low-Pass (LP), Subsonic
Low-Pass Crossover Frequency: 32 - 300 Hz
Subsonic Filter: 10 - 50 Hz
Bass Boost: 0 - 12 dB
Bass/Gain Remote: Yes
Fuse Rating: 25A x 3
Total Fuse Rating: 75
Strappable: Yes
CEA-2006 Compliant: No
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TRAX1.2000D 2000W 2-ohm Stable Monoblock Class-D Car Amplifier
$119.99
$177.60
Precision Power TRAX1.2000D 2000W Max (700W RMS) 2-ohm Stable Monoblock Class-D Car Amplifier
General Features:
Precision Power TRAX1.2000D
Class-D 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 700 watts x 1 chan.
2 ohms: 1000 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 2000 watts
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Speaker-level (high-level) inputs
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: 200 mV - 6 V
Variable low-pass filter: 32 - 300 Hz
Subsonic filter: 10 - 50 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 25A x 2
Dimensions: 9.75"W x 14"L x 2.5"H
Specifications:
Amplifier Class: D
Number of Channels: 1 - Mono
Total Peak Power Output: 2000 watts
Total RMS Power Output: 1000 watts
Maximum Input Gauge Size: 4 AWG
Minimum Impedance Unbridged: 2 ohms
Minimum Impedance Bridged: Not Bridgeable
Speaker Level Inputs: No
Preamp Outputs: 1 pair
Built-in Crossover: Low-Pass (LP), Subsonic
Low-Pass Crossover Frequency: 32 - 300 Hz
Subsonic Filter: 1 - 50 Hz
Bass Boost: 0 - 12 dB
Bass/Gain Remote: Yes
Fan Cooled: No
Fuse Rating: 25A x 2
Total Fuse Rating: 50
Strappable: Yes
CEA-2006 Compliant: No
Amp Bluetooth Connectivity: No
Hi-Res Certified: No
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TRAX1.1500D 1500W Class D Trax Series Monoblock Amplifier
$89.99
$115.80
Precision Power TRAX1.1500D 1500W Peak (750W RMS) Class D Trax Series Monoblock Amplifier
General Features:
Trax Series Class D 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohm: 500 watts x 1 channel
2 ohm: 750 watts x 1 channel
Total RMS power output: 750 watts
Power and protect LED light indicator
Wired bass level remote control included
1 pair of pre-amp outputs
Signal sensing remote turn-on
Thermal, overload, and speaker short protection
Input sensitivity:0.2 - 6 volts
Total Harmonic Distortion (THD): 1%
Variable low-pass filter: 32 - 300 Hz
Subsonic filter: 10 - 50 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 70A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 15" L x 9.75" W x 2.5" H
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Precision Power TRAX5.2200D 2200W Trax Series 2-ohm Stable 5 Channel Class-D Amplifier
$149.99
$227.00
Precision Power TRAX5.2200D 2200W Max (1100W RMS) Trax Series 2-ohm Stable 5 Channel Class-D Amplifier
General Features:
Precision Power Trax Series TRAX5.2200D
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4 ohms: 100 watts x 4 chan., 350W x Sub chan.
2 ohms: 150 watts x 4 chan., 500W x Sub chan.
1 ohm: ------------N/A------------
Bridged, 4 ohms: 300 watts x 2 chan., 500W x Sub chan.
Total power output: 2200 watts
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty aluminum alloy heat-sink
Input sensitivity: 200mV - 6V
Variable high-pass filter: 80- 1200 Hz, 12 dB/octave
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 40 A x 2
Specifications:
Power Specifications - Full Range Channels:
RMS Power @ 4 ohms: 100 watts x 4 channels
RMS Power @ 2 ohms: 150 watts x 4 channels
Bridged RMS Power: 300 watts x 2 channels
Power Specifications - Subwoofer Channel:
RMS Power @ 4 ohms: 300 watts x 1 channels
RMS Power @ 2 ohms: 500 watts x 1 channels
Amplifier Specifications:
Amplifier Series: Trax
Amplifier Class: D
Number of Channels: 5
Total Peak Power Output: 2200 watts
Total RMS Power Output: 1100 watts
Maximum Input Gauge Size: 4 AWG
Minimum Impedance Unbridged: 2 ohms
Minimum Impedance Bridged: 4 ohms
Speaker Level Inputs: No
Preamp Outputs: No
Built-in Crossover: Low-Pass (LP), High-Pass (HP)
High-Pass Crossover Frequency: 80 - 1200 Hz
Low-Pass Crossover Frequency: 50 - 250 Hz
Bass Boost: 0 - 12 dB
Bass/Gain Remote: Yes
Fuse Rating: 40A x 2
Total Fuse Rating: 80
CEA-2006 Compliant: No
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.