All Subwoofer Enclosures Boxes (188)

Alpine S2-SB12V 12" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Double The Fun -Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.Dishing It Out -The S2-SB12V comes loaded with Alpine's S2-W12D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 35 Hz to maximize performance.Getting It Together -Two S2-SB12V enclosures can be linked using Alpine's KTX-H12 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.General Features:• 12" ported subwoofer enclosure• loaded with Alpine's S2-W12D4 subwoofer• linkable to second S2-SB12V enclosure with linking kit (sold separately)• Kevlar-reinforced pulp cone with Santoprene rubber surround• power handling: 600 watts RMS• frequency response: 26-200 Hz• 2-ohm impedance• dimensions: 17"W x 14.75"H x 15.5"D• warranty: 1 yearSpecifications:• Driver: Single 12."• Impedance: 2Ω (dual 4Ω voice coils paralleled)• Power Handling: 600W RMS• Enclosure: Ported• Frequency Response: 26-200Hz• Port Tuning: 35Hz• Dimensions: W = 17.0", H = 14.750", Depth = 15.50" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-DB8V-TRK Dual 8” Alpine Halo S-Series Preloaded Truck Subwoofer Enclosure with ProLink™ General Features: • Unique Alpine Halo Design with ProLink™• Deep Bass Output• Great Low Frequency Extension• Side-Firing Cabin Loading Ports• Expandable width from 40” – 51” allows for compact, under-the-rear-seat installation in many full size trucks including: 2018+ RAM 1500 (Crew Cab), 2015+ Ford F-150 (Crew Cab), 2018+ GMC Sierra / Chevrolet Silverado (Crew Cab), 2020+ Jeep Gladiator and many other vehicle applications• Rubber, modular foot design accommodates trucks with uneven under-seat areas• Integrated amplifier tray for hideaway amp installation• Dimensions: 40” - 51”(Adjustable-W) x 8-3/4”(H) x 13-3/4”(D)• Dual 4Ω Subwoofers Wired in Parallel for a 2Ω Load• Frequency Response: 35Hz-215Hz• Vented Tuning Frequency: 36Hz• Sensitivity: 84dB• Power Handling: 600W RMS (300W x 2)• Compatible with S-A60M / S2-A60M & OPTIM8® (PXE-C80-88) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-SB10 2400W Peak (800W RMS) Loaded Single 10" Sealed Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle General Features: Sealed enclosure with 1 10" Status Series Subwoofer Includes one Alpine HDZ-W10 subwoofer Clear Acrylic side viewing windows with etched Alpine classic six chiclets Integrated blue/green switchable LED lighting Power Handling: Peak: 2400 watts RMS: 800 watts Final Impedance: 2-ohm Pulp/Mica cone High-Amplitude Multi-Roll (HAMR) surround Carbon Fiber dust cap Frequency Response: 27 - 200 Hz Sensitivity: 82.2 dB Dimensions: 13.75" L x 13.75" H x 16.25" W Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-TSUB-T3A 10” Subwoofer & Amplifier Upgrade Kit for 2017-2023 Tesla Model 3 Get ludicrous bass performance in your Tesla! The PSS-TSLA-T3A is a 10” sealed, pre-loaded subwoofer & power pack amplifier kit designed for plug-and-play performance for the 2017-2023 Tesla Model 3 with factory equipped premium sound systemBoost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-T3A directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful 200W 10” sealed subwoofer, without cutting or modifying. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.General Features:• Designed for 2017–2023 Tesla Model 3 Premium• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer in Premium Sound-equipped vehicles• Not compatible with Tesla Base Audio system• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness and integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2017–2023 Tesla Model 3 with OEM Premium Audio System• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz – 300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This combined with a front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink Double The Fun -Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.Dishing It Out -The S2-SB10V comes loaded with Alpine's S2-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance.Getting It Together -Two S2-SB10V enclosures can be linked using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.General Features:• 10" ported subwoofer enclosure• loaded with Alpine's S2-W10D4 subwoofer• linkable to second S2-SB10V enclosure with linking kit (sold separately)• Kevlar-reinforced pulp cone with Santoprene rubber surround• power handling: 600 watts RMS• frequency response: 28-200 Hz• 2-ohm impedance• dimensions: 16"W x 12.75"H x 15"D• warranty: 1 yearSpecifications:• Driver: Single 10."• Impedance: 2Ω (dual 4Ω voice coils paralleled)• Power Handling: 600W RMS• Enclosure: Ported• Frequency Response: 28-200Hz• Port Tuning: 36Hz• Dimensions: W = 16.0", H = 12.750", Depth = 15.0" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB12V 12" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink Double The Fun -Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.Dishing It Out -The S2-SB12V comes loaded with Alpine's S2-W12D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 35 Hz to maximize performance.Getting It Together -Two S2-SB12V enclosures can be linked using Alpine's KTX-H12 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.General Features:• 12" ported subwoofer enclosure• loaded with Alpine's S2-W12D4 subwoofer• linkable to second S2-SB12V enclosure with linking kit (sold separately)• Kevlar-reinforced pulp cone with Santoprene rubber surround• power handling: 600 watts RMS• frequency response: 26-200 Hz• 2-ohm impedance• dimensions: 17"W x 14.75"H x 15.5"D• warranty: 1 yearSpecifications:• Driver: Single 12."• Impedance: 2Ω (dual 4Ω voice coils paralleled)• Power Handling: 600W RMS• Enclosure: Ported• Frequency Response: 26-200Hz• Port Tuning: 35Hz• Dimensions: W = 17.0", H = 14.750", Depth = 15.50" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-DB8V-TRK Dual 8” Alpine Halo S-Series Preloaded Truck Subwoofer Enclosure with ProLink™ General Features: • Unique Alpine Halo Design with ProLink™• Deep Bass Output• Great Low Frequency Extension• Side-Firing Cabin Loading Ports• Expandable width from 40” – 51” allows for compact, under-the-rear-seat installation in many full size trucks including: 2018+ RAM 1500 (Crew Cab), 2015+ Ford F-150 (Crew Cab), 2018+ GMC Sierra / Chevrolet Silverado (Crew Cab), 2020+ Jeep Gladiator and many other vehicle applications• Rubber, modular foot design accommodates trucks with uneven under-seat areas• Integrated amplifier tray for hideaway amp installation• Dimensions: 40” - 51”(Adjustable-W) x 8-3/4”(H) x 13-3/4”(D)• Dual 4Ω Subwoofers Wired in Parallel for a 2Ω Load• Frequency Response: 35Hz-215Hz• Vented Tuning Frequency: 36Hz• Sensitivity: 84dB• Power Handling: 600W RMS (300W x 2)• Compatible with S-A60M / S2-A60M & OPTIM8® (PXE-C80-88) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-SB10 2400W Peak (800W RMS) Loaded Single 10" Sealed Enclosure General Features: Sealed enclosure with 1 10" Status Series Subwoofer Includes one Alpine HDZ-W10 subwoofer Clear Acrylic side viewing windows with etched Alpine classic six chiclets Integrated blue/green switchable LED lighting Power Handling: Peak: 2400 watts RMS: 800 watts Final Impedance: 2-ohm Pulp/Mica cone High-Amplitude Multi-Roll (HAMR) surround Carbon Fiber dust cap Frequency Response: 27 - 200 Hz Sensitivity: 82.2 dB Dimensions: 13.75" L x 13.75" H x 16.25" W Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DPUS10 400W Peak (200W RMS) Loaded Single 10" Sealed Underseat Enclosure with Bass Remote  The DPUS10, an addition to Diamond’s line of under-seat enclosures, boasts unique features designed to simplify installation, address audio issues from the OEM vehicle’s audio signal, and alleviate space concerns. The DPUS10 offers 20V line-level inputs and auto turn-on circuits for OEM integration. To combat poor OEM signal quality, the DPUS10 features dual bass controls, one for level and the second with Diamonds’ exclusive bass enhancement engine. The DPUS10 also includes the standard low-pass, subsonic filters, and phase adjustments. Notably, the enclosure/amplifier housing is remarkably compact, yet solid with its cast aluminum construction, ensuring it fits a wide range of applications while delivering impressive output from the onboard 10 inch powered subwoofer and 200WRMS amplifier. This compact design reassures you that the DPUS10 will not only enhance your audio experience but also save valuable space in your vehicle. General Features Single 10" Sealed Loaded Subwoofer Enclosure with Built-In Amplifier Power Handling: Peak: 400 watts RMS: 200 watts Built-in Class D amplifier Includes bass remote for Diamond Bass Enhancement Engine (DBEE) DBEE signal bandwidth adjustment feature Super-slim Under seat subwoofer enclosure Gauge power and ground wiring is recommended for installation Enclosure Dimensions: 13.58" L x 9.65" W x 2.76" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" DMD Series Subwoofer Polypropylene Cone Nitrile Butadiene Rubber NBR Surround Slim and shallow subwoofer construction Black spider with woven tinsel leads Vented pole piece for cooler operation Klippel optimized motor and suspension symmetry Sensitivity: 84.0 dB Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Thermal, short, and overload protection circuits Auto turn-on signal circuit Speaker-level (high-level) inputs 120 volts high-level and low-level inputs PWM MOSFET power supply for reliable connection Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 16 dB Subsonic Filter: 20 Hz (fixed) RCA Preamp Output: No Fuse Rating: 30A x 1  Enclosure Features: 10" Sealed Enclosure Box Finish: Black Aluminum Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute USA SQ6.5PKB 6.5" Square Flat Empty Enclosure Box – Black Carpet The Absolute USA SQ6.5PKB delivers a compact, durable, and acoustically optimized your 6.5 inch speaker enclosure. Known for reliability and long-lasting build quality, Absolute USA enclosures feature solid MDF construction and airtight sealed chambers for accurate, controlled sound reproduction. Finished in thick black carpet for extra protection and a clean appearance, this lightweight enclosure is ideal for rear decks, custom installs, or tight spaces where performance and durability matter. General Features: Sealed airtight chamber designed to hold one (1) 6.5-inch speaker 0.20 cubic feet internal air volume (net) Solid MDF construction with durable black carpet finish Includes speaker terminal cup for easy wiring Compatible with most standard 6.5-inch speakers Square, low-profile design ideal for rear deck or custom installs Black color One Unit Dimensions (W X H X D): 7.75 X 7.75 X 5 Inches Package Dimensions (W X H X D): 11 X 8 X 8 Inches Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.