All Subwoofer Enclosures Boxes (188)

2 Absolute USA 6X9PKG 6 X 9 Inches Angled/Wedge Box Speaker (one pair) Absolute 6x9PKG Two 6 x 9 Speaker Box Angled/Wedge with speaker terminal; Holds Two 6" x 9" Speaker and features a sealed design for quality audio. The MDF material and automotive carpeting provide durability. PAIR 6 X 9 x 2 BOX ENCLOSURES for CAR AUDIO SPEAKERS 6X9." THICK MDF + THICK DURABLE ACOUSTIC CARPET General Features: Sealed airtight chamber each holds (1) 6 X 9 Inches speaker Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Fully carpeted Wedge style to allow speakers to fit towards the front or rear of the vehicle Thick MDF + Thick Durable Acoustic Carpet Gray Color Dimensions (W X H X D): 12.25 X 8.25 X 9.25 X 3.25 Inches Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute 6.5PKB Empty 6.5" Single Angled/Wedge Subwoofer Enclosure Speaker Box - Black Absolute enclosures have created a solid portfolio of reliability over the years, and the 6.5-inch box PKB is no different. Like most products, it adopts a sealed, airtight chamber design, created using a high-end MDF wood finish to work its magic. Its greatest strength, however, must be its lightweight nature that does not compromise on longevity, partly thanks to the thick, durable carpet covering the entire enclosure. General Features: Sealed airtight chamber, each holds (1) 6.5-inch speaker One Pair of 6.5" Angled Single Sealed Speaker Enclosures Speaker mounting depth: 4" Durable 1/2" Medium Density Fiberboard (MDF) construction Black carpet finish One set of spring terminals Each box is stuffed with polyfill Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Black Color Cutout: 5" Total Air Volume: 0.09 Cubic Ft. Weight: 3 Lbs. Mounting Depth: 4 1/4" Dimensions: Height: 8 1/8” Length: 8 1/8" Depth: 5" Construction: 1/2"High-Density MDF Wood Carpeted With Durable Trunk Liner Finish 1 Spring-Loaded Terminal Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute USA MSHF10 Single 10-Inch Sealed MDF Enclosure General Features: Single 10" Sealed Angled MDF Subwoofer Enclosure Insulated fiberglass liner 3/4" High-quality MDF material Professionally Sealed, caulked, and carpeted Designed for round woofers Durable black carpeting Gold screw terminals Subwoofer mounting depth: 8-1/4" Subwoofer cutout diameter: 9-5/8" Total box volume: 0.90 cubic feet Dimensions: 10"TD x 14"BD x 15-1/2W x 12"H Warning:Cancer and Reproductive Harm

Absolute USA VEGS12 Single 12" Black Slot Ported Subwoofer Enclosure Empty Box You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. Polyfill is built into the box, ensuring your subs perform perfectly. It's also better for your bass and better for you. General Features: 12" Ported Rectangle Subwoofer Enclosure Black carpet Gold-plated binding posts Banana clip ready 1 L-shaped vent/port Mounting depth: 15-1/4" Single 12" Vented MDF Enclosure Total port volume: 0.16 cubic feet Made from 3/4" Medium Density Fiberboard (MDF) Dimensions: 17"D x 19 1/4"W x 13-5/8"H Holds one 12" subwoofer Durable black carpeting Gold Terminals Tuning Frequency: 36Hz Internal Box Volume: 1.8 cubic feet UPC: 811234014936 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Absolute USA VEGD12 Dual 12" Slot Vented Ported Universal Subwoofer Sub Enclosure Empty Box Absolute USA introduces its Vented Ported series line-up of high-performance subwoofer enclosures to bridge the gap between competition-grade quality and universal-fitting pre-fabricated enclosures. The VEGD12 subwoofer enclosure is a dual 12-inch, universal fit, ported subwoofer box designed for maximum bass and responsiveness. and If you're looking for a big sound in a solid package. To get that sound, you need the right box, and the Absolute USA VEGD12 enclosure features a ported design that'll give you that extra boom you're looking for. Absolute USA VEGD12 ported enclosure holds two 12" subwoofers. Its large vents feature rounded inner corners that keep port noise minimum for a more accurate response. Just add the right sub, amp, and wiring, then mount the enclosure securely, and you're ready to hit the road with some real bass artillery in your arsenal. General Features: Dual 12 inch Ported Subwoofer box 3/4" MDF (Medium Density Fiberboard) construction Encased in durable black carpeting Premium carpeted finish Silver spring-loaded binding post terminals Banana clip ready Tuned Ported Slots to optimize Bass Response Subwoofer mounting depth: 15-1/4" Subwoofer cutout diameter: 11-1/4" Box volume: 1.635 cubic feet (per chamber) Total box volume: 3.27 cubic feet Port volume: 0.16 cubic feet (per port) Dimensions: 32.24"W x 17.52"W x 13.5"H Dimensions 819mmX445mmX343mm 2 Years Manufacturer Warranty This universal enclosure box fits most 12" round subwoofers such as Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, JBL, Boss Audio, Diamond Audio, Hifonics, Cerwin-Vega, Rockford-Fosgate and ... Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Alpine PSS-TSUB-T3A 10” Subwoofer & Amplifier Upgrade Kit for 2017-2023 Tesla Model 3 & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Get ludicrous bass performance in your Tesla! The PSS-TSLA-T3A is a 10” sealed, pre-loaded subwoofer & power pack amplifier kit designed for plug-and-play performance for the 2017-2023 Tesla Model 3 with factory-equipped premium sound systemBoost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-T3A directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful 200W 10” sealed subwoofer, without cutting or modifying. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.General Features:• Designed for 2017–2023 Tesla Model 3 Premium• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer in Premium Sound-equipped vehicles• Not compatible with Tesla Base Audio system• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness and integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2017–2023 Tesla Model 3 with OEM Premium Audio System• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz – 300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB12 12" BassRev™ Powered Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Get the benefits of large-enclosure sound in a shallow-enclosure design! With proprietary technology designed to increase bass output without compromising space, the BassRev Powered Subwoofer Enclosures are sure to take your bass performance to the next level.OPTIM Sync Technology – The built-in DSP amplifier includes OPTIM Sync technology, which uses a proprietary dynamic bass-boost algorithm to extend bass frequencies on the preloaded subwoofer, delivering big-bass sound in a shallow enclosure.Shallow Design – The subwoofer's shallow footprint allows it to fit virtually anywhere in most vehicles.Attractive Design – The subwoofer enclosure is built from sturdy MDF with a double-brace structure, finished with premium black carpet and an embroidered white Alpine logo for bold contrast.General Features:• Preloaded BassRev Subwoofer• Available in a 10” or 12” size• Built-in powered DSP amplifier with OPTIM Sync technology• Shallow footprint for flexible fitment• Sealed enclosure• Carpeted MDF enclosure with double brace structure• Embroidered Alpine logo• Extended grille designSYSTEM COMPONENTS:• Preloaded Subwoofer EnclosureSYSTEM TECH SPECS:• 12” Enclosure Dimensions: 533mm (21”) W x 343mm (13.5”) H x 168mm (6 5/8”) D• Power Handling: 200W RMS / 400W Peak• Nominal Impedance: 4Ω• Frequency Response: 31 Hz – 200 Hz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Double The Fun -Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.Dishing It Out -The S2-SB10V comes loaded with Alpine's S2-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance.Getting It Together -Two S2-SB10V enclosures can be linked using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.General Features:• 10" ported subwoofer enclosure• loaded with Alpine's S2-W10D4 subwoofer• linkable to second S2-SB10V enclosure with linking kit (sold separately)• Kevlar-reinforced pulp cone with Santoprene rubber surround• power handling: 600 watts RMS• frequency response: 28-200 Hz• 2-ohm impedance• dimensions: 16"W x 12.75"H x 15"D• warranty: 1 yearSpecifications:• Driver: Single 10."• Impedance: 2Ω (dual 4Ω voice coils paralleled)• Power Handling: 600W RMS• Enclosure: Ported• Frequency Response: 28-200Hz• Port Tuning: 36Hz• Dimensions: W = 16.0", H = 12.750", Depth = 15.0" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.