4" Car Speakers (46)

Crunch Ground Pounder CS4CX 200W 4" 2-Way CS Series Coaxial Car Speakers  Item Description 4" CS Series 2-Way Car Speakers Power Handling: Silver alpha cellulose cones Moisture-resistant rubber surround Neo mylar soft dome tweeter 4 ohms impedance Sensitivity: 88dB Spade speaker terminals for easy installations Anti-resonant stamped steel basket for improved performance Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JBL GX428 105 Watts Max, GX Series 4" 2-Way Coaxial Car Audio SpeakersDesigned to fit into 4" factory locations without vehicle modification, the GX428 delivers high-energy JBL pro sound for in vehicle applications. Leveraging our patented Plus One™ woofer cone with three Ohm voice coil and edge-driven soft-dome tweeter mounted into our all new proprietary tweeter deflector, all individually voiced to deliver authentic JBL pro sound for your next roadtrip. To ensure that you get a great performance even with the windows down, the three ohm voice coil extracts more power from the amplifier, delivering high output and deeper bass. General Features: Power Handling 35W RMS, 105W Peak Frequency Response 75Hz – 21kHz Impedance 2.3 ohms Sensitivity (@ 2.83V/m) 90dB ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov  

ALPINE S-S40 140 Watt 4" Coaxial 2-Way Car Audio Speakers Alpine's been building quality car speakers for decades, and their latest S-Series S-S40 4" speakers are no exception. If you've been living with anemic factory sound, this step-up in range, tone definition, and power handling will make you giddy just about every time you hop behind the wheel. And if you're really jonesing for a boost in sound quality, hook them up to a powerful aftermarket stereo or amp for increased performance. Worthy materials Alpine's carbon-fiber-reinforced plastic woofer cones provide next-level sturdiness but are also agile enough to handle the complexities of the midrange. Their high amplitude multi-roll rubber surround contributes to reduced distortion for a cleaner sound, while silk dome tweeters give you all the precise details that bring out the character of the instruments and vocals. If you've never experienced Alpine sound quality, these speakers are a great place to start. Grilles are not included; the factory grilles should be suitable for most applications. General Features: 4" S Series 2-way Coaxial Car Speakers Peak Power Handling: 280 watts per pair / 140 watts each RMS Power Handling: 90 watts per pair / 45 watts each Carbon Fiber cone material Rubber speaker surround 3/4" Silk Dome Tweeters Swivel application tweeters H.A.M.R surround Shallow mounting design Ferrite magnet motor structure Top-mount Depth: 1-3/4" Cutout Dimensions: 3-11/16" Impedance: 4 ohms Frequency Response: 97 - 22000 Hz Sensitivity: 86 dB Grilles not included Authorized Internet Dealer What's in the  S-S40 package: 2-way speakers 4x6 Adapter brackets 12" Lengths of speaker wire Eight 3/4" Screws Eight 5/16" Screws Eight 1/4" Screws 8 Speed clips 8 Spacers 2 Adhesive backed gaskets Warranty information Online product registration information Important Notice sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

One Pair Rockford Fosgate Prime R14X2 120W Peak 4" 2-Way PRIME Series Coaxial Car Audio Speakers The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. The 4" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome tweeter. Includes grilles so they look as good as they sound. General Features: 4" 2-Way PRIME Series Coaxial Speakers Power Handling: Peak: 120 watts per pair / 60 watts each Power Handling: RMS: 60 watts per pair / 30 watts each Recommended power range: 5 - 30 watts RMS per channel Polypropylene mid-woofer cone material Rubber speaker surround CEA-2031 compliant speakers 1/2" Silk balanced dome tweeter Stamped steel basket 4 ohms impedance Integrated crossover system for tweeter protection Protective grilles and mounting hardware are included Klippel verification optimized components for the best possible performance Frequency Response: 100-20,000 Hz Top-mount Depth: 1-3/4" Sensitivity: 85dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R14X2 owner's manual Two 4" Two-way speakers 2 Grilles Two 15' Lengths of speaker wire (each has female quick-slides on one end and tinned bare wire on the other) Eight 1-1/4" Screws 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Alpine EV-40M-T 4" Front Dash Speaker Upgrade Kit Compatible Fit Select 17-24 Model 3 & 20-24 Model Y & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Elevate your Tesla’s audio experience with the Alpine EV-40M-T, a premium 4" midrange front dash speaker upgrade designed for seamless integration and enhanced sound clarity. With Tesla-specific tuning and plug-and-play installation, this upgrade transforms your listening experience without compromising the vehicle’s aesthetics. Optimized for Tesla’s Interior The EV-40M-T is engineered to complement Tesla’s unique cabin acoustics, delivering clear and balanced audio with a refined soundstage. Whether you're commuting or enjoying a road trip, these speakers enhance every detail of your music, podcasts, and calls. Effortless Plug-and-Play Installation Designed for Tesla Model 3 (2017-2024) and Model Y (2020-2024), the EV-40M-T includes OEM-specific connectors and adapter rings for a hassle-free installation. No cutting or modifications are required, ensuring a factory-like fit with improved sound performance. Enhanced Audio with Precision Engineering Featuring Alpine’s hybrid carbon fiber cone construction and H.A.M.R. (High Amplitude Multi-Roll) surround technology, the EV-40M-T provides distortion-free audio with improved midrange and high-frequency response. The included 1" neodymium tweeter adds crisp, detailed highs for a fuller and more immersive listening experience. Built for Longevity Constructed with premium materials, including strontium ferrite magnets and hybrid carbon fiber cones, the EV-40M-T is designed for durability while maintaining the high-quality craftsmanship expected by Tesla owners. General Features: Direct-fit speaker upgrade for Tesla Model 3 (2017-2024) and Model Y (2020-2024) Includes (3) 4" midrange speakers with strontium ferrite magnets Includes (1) 1" neodymium tweeter for high-frequency clarity Hybrid carbon fiber cone material for accurate and powerful sound reproduction Alpine’s H.A.M.R. surround technology for enhanced linearity and performance Plug-and-play installation with integrated OEM adapter rings Custom-tuned for Tesla’s unique acoustic environment Engineered for stealth integration, preserving Tesla’s sleek aesthetic Optional tweeter installation—professional assistance recommended Technical Specifications Specification Details Speaker Type (3) 4" midrange speakers + (1) 1" tweeter Materials Hybrid carbon fiber cone and neodymium tweeter magnet Surround Technology Alpine H.A.M.R. (High Amplitude Multi-Roll) Frequency Response 90Hz - 20kHz Power Handling 40W RMS / 160W Peak Sensitivity 90 dB Impedance 4 Ohms Vehicle Compatibility 2017-2024 Tesla Model 3, 2020-2024 Tesla Model Y Installation Type Plug-and-play (tweeter may require modification)   Upgrade your Tesla’s sound system with Alpine’s EV-40M-T and enjoy crystal-clear midrange and high-frequency performance with a factory-fit design. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BRV-S40 4" BassRev Series 4-ohm 2-Way Coaxial Speaker Set & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Using proprietary software technology and a powerful digital sound processor, we pushed the envelope of what’s possible in a sound system, redefining how you experience your music on the road.H.E.D.G.E. Surround – The symmetrical shape, coupled with the High Excursion Design Gathered Edge, allows the speaker to operate more symmetrically and linearly for increased output and extended low frequency.Unique Design – The unique, lapel-shaped cone allows us to achieve high cone excursion for greater motion and height compared to a traditional speaker.OPTIM Sync Technology – Using a proprietary dynamic bass boost algorithm, we can extend the bass frequency on each speaker while staying within the safe operating limits. Each speaker features a pre-EQ to enhance the tonal balance during playback.General Features:• High Excursion Design Gathered Edge (H.E.D.G.E.) rubber surround increases output and low frequency extension• Unique lapel cone shape for high excursion• OPTIM Sync Technology pre - EQ selection specific to each driver (requires 3.0 or newer update on PXE -C80-88)• Polypropylene and Mica Cone Material for increased rigidity• Ferrite magnet• Gun metal chemical topcoat for premium aestheticSYSTEM TECH SPECS:• Woofer Size: 4”• Tweeter Size: 0.75”• Maximum Peak Power: 120W• Maximum RMS Power: 40W• Frequency Response: Without BassRev 75 Hz – 20k Hz, With BassRev 67 Hz – 20k Hz• Impedance: 4Ω• Sensitivity: 84dB• 30% SPL increase for increased loudness• 25% X-Max increase for increased cone movement• Mounting Depth: 45mm (1.77”)SYSTEM COMPONENTS:• 4” Component Speaker Set• 0.75” Tweeter Set Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BRV-S40 4" BassRev Series 4-ohm 2-Way Coaxial Speaker Set Using proprietary software technology and a powerful digital sound processor, we pushed the envelope of what’s possible in a sound system, redefining how you experience your music on the road.H.E.D.G.E. Surround – The symmetrical shape, coupled with the High Excursion Design Gathered Edge, allows the speaker to operate more symmetrically and linearly for increased output and extended low frequency.Unique Design – The unique lapeled cone shape allows us to achieve high cone excursion for more motion and height when compared to a traditional speaker.OPTIM Sync Technology – Using a proprietary dynamic bass boost algorithm, we can extend the bass frequency on each speaker while staying within the safe operating limits. Each speaker features a pre-EQ to enhance the tonal balance during playback.General Features:• High Excursion Design Gathered Edge (H.E.D.G.E.) rubber surround increases output and low frequency extension• Unique lapel cone shape for high excursion• OPTIM Sync Technology pre-EQ selection specific to each driver (requires 3.0 or newer update on PXE-C80-88)• Polypropylene and Mica Cone Material for increased rigidity• Ferrite magnet• Gun metal chemical topcoat for premium aestheticSYSTEM TECH SPECS:• Woofer Size: 4”• Tweeter Size: 0.75”• Maximum Peak Power: 120W• Maximum RMS Power: 40W• Frequency Response: Without BassRev 75 Hz – 20k Hz, With BassRev 67 Hz – 20k Hz• Impedance: 4Ω• Sensitivity: 84dB• 30% SPL increase for increased loudness• 25% X-Max increase for increased cone movement• Mounting Depth: 45mm (1.77”)SYSTEM COMPONENTS:• 4” Component Speaker Set• 0.75” Tweeter Set Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine EV-40M-T 4" Front Dash Speaker Upgrade Kit Compatible Fit Select 17-24 Model 3 & 20-24 Model Y Elevate your Tesla’s audio experience with the Alpine EV-40M-T, a premium 4" midrange front dash speaker upgrade designed for seamless integration and enhanced sound clarity. With Tesla-specific tuning and plug-and-play installation, this upgrade transforms your listening experience without compromising the vehicle’s aesthetics. Optimized for Tesla’s Interior The EV-40M-T is engineered to complement Tesla’s unique cabin acoustics, delivering clear and balanced audio with a refined soundstage. Whether you're commuting or enjoying a road trip, these speakers enhance every detail of your music, podcasts, and calls. Effortless Plug-and-Play Installation Designed for Tesla Model 3 (2017-2024) and Model Y (2020-2024), the EV-40M-T includes OEM-specific connectors and adapter rings for a hassle-free installation. No cutting or modifications are required, ensuring a factory-like fit with improved sound performance. Enhanced Audio with Precision Engineering Featuring Alpine’s hybrid carbon fiber cone construction and H.A.M.R. (High Amplitude Multi-Roll) surround technology, the EV-40M-T provides distortion-free audio with improved midrange and high-frequency response. The included 1" neodymium tweeter adds crisp, detailed highs for a fuller and more immersive listening experience. Built for Longevity Constructed with premium materials, including strontium ferrite magnets and hybrid carbon fiber cones, the EV-40M-T is designed for durability while maintaining the high-quality craftsmanship expected by Tesla owners. General Features: Direct-fit speaker upgrade for Tesla Model 3 (2017-2024) and Model Y (2020-2024) Includes (3) 4" midrange speakers with strontium ferrite magnets Includes (1) 1" neodymium tweeter for high-frequency clarity Hybrid carbon fiber cone material for accurate and powerful sound reproduction Alpine’s H.A.M.R. surround technology for enhanced linearity and performance Plug-and-play installation with integrated OEM adapter rings Custom-tuned for Tesla’s unique acoustic environment Engineered for stealth integration, preserving Tesla’s sleek aesthetic Optional tweeter installation—professional assistance recommended Technical Specifications Specification Details Speaker Type (3) 4" midrange speakers + (1) 1" tweeter Materials Hybrid carbon fiber cone and neodymium tweeter magnet Surround Technology Alpine H.A.M.R. (High Amplitude Multi-Roll) Frequency Response 90Hz - 20kHz Power Handling 40W RMS / 160W Peak Sensitivity 90 dB Impedance 4 Ohms Vehicle Compatibility 2017-2024 Tesla Model 3, 2020-2024 Tesla Model Y Installation Type Plug-and-play (tweeter may require modification)   Upgrade your Tesla’s sound system with Alpine’s EV-40M-T and enjoy crystal-clear midrange and high-frequency performance with a factory-fit design.

2 Pair Cerwin Vega XED42 XED Series 4" 2-Way Coaxial Speakers Defy all odds and overcome budget limitations with the best-in-class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS offer tremendous value and sound that will be music to your ears. Specifications: SPEAKER SIZE - 4” SPEAKER TYPE - TRI AXIAL, SPEAKER TYPE - CO AXIAL OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE DIAPHRAGM MATERIAL - ALUMINIUM BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM CROSSOVER INCLUDED - YES - INTERNAL FREQUENCY RESPONSE (HZ): 70HZ-20KHZ VOICE COIL DIAMETER - INCH (MM) - 1"  POWER HANDLING RMS: 20W POWER HANDLING MAX: 150W MOUNTING DEPTH: 2.25” (57.3MM) MOUNTING DIAMETER: 3.9” (101MM) GRILL: YES Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMDX4 DMDX SERIES 4" 2-WAY CONCENTRIC COAXIAL SPEAKERS High-Fidelity Sound • Affordable Upgrade • Everyday Value Upgrade your ride with the all-new Diamond Audio DMDX Concentric Coaxial Speakers—engineered for car audio enthusiasts who want high-quality sound without the high price. The DMDX series delivers the perfect balance of clarity, power, and value, making it the ideal car audio upgrade for drivers who demand more than factory sound. With its advanced concentric coaxial design, the DMDX lineup produces an incredibly natural soundstage, combining crisp highs, rich midrange detail, and tight, responsive bass. Every note is precise, every lyric is clear, and every beat hits with energy—transforming your daily drive into a concert on wheels. Built with Diamond Audio’s heritage of sound innovation, these coaxial car speakers are crafted from premium components for lasting performance. Whether you’re replacing OEM speakers or enhancing your aftermarket sound system, the DMDX series is the ultimate way to achieve affordable high-fidelity sound. Specifications: Power Handling - Watts (RMS/Peak): 30W RMS / 90W MAX Frequency Response (Hz): 70Hz-20KHz Sensitivity (1W/1M): 82dB Nominal Impedance (ohms): 4Ω Free-Air Resonance (Hz): 110Hz Mounting Depth-inch (mm): 1.81" (46mm) Cut-Out Diameter -inch (mm): 3.7" (94mm) Overall Diameter -inch (mm): 4.02" (102mm) Overall Height -inch (mm): 2.01" (51.1mm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega XED42 XED Series 4" 2-Way Coaxial Speakers Defy all odds and overcome budget limitations with the best-in-class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears. Specifications: SPEAKER SIZE - 4” SPEAKER TYPE - TRI AXIAL, SPEAKER TYPE - CO AXIAL OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE DIAPHRAGM MATERIAL - ALUMINIUM BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM CROSSOVER INCLUDED - YES - INTERNAL FREQUENCY RESPONSE (HZ): 70HZ-20KHZ VOICE COIL DIAMETER - INCH (MM) - 1" POWER HANDLING RMS: 20W POWER HANDLING MAX: 150W MOUNTING DEPTH: 2.25” (57.3MM) MOUNTING DIAMETER: 3.9” (101MM) GRILL: YES Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega H40 HED 2025 Edition 4” 2-Way Coaxial Full Range Speaker Set Transform your car audio system with the Cerwin Vega HED 2025 Edition H40, a 4” 2-way coaxial full-range speaker system designed to bring you dynamic, high-definition sound across the entire frequency spectrum. As part of the HED Series, the H40 delivers crystal-clear highs, full-bodied mids, and punchy bass, turning every drive into a captivating listening experience. Whether you're enjoying bass-heavy tracks or delicate acoustic music, the H40 ensures every note is heard with remarkable clarity and depth. 2-Way Coaxial Design for Balanced Sound The H40 features a 4” woofer and a 1” PEI tweeter that work together to create a full-range, dynamic audio experience. The polypropylene cone offers responsive bass and midrange reproduction, while the UV-treated foam surround provides enhanced durability, ensuring long-lasting performance. The dynamically balanced 1” PEI tweeter, powered by a neodymium magnet, delivers crisp, detailed highs, ensuring every song is rich in clarity and free from distortion. HED Series Features 4” Woofer & 1” PEI Tweeter – A complete 2-way coaxial system providing balanced, full-range audio with precise bass, clear mids, and brilliant highs. Responsive Polypropylene Cone – Offers detailed, accurate sound reproduction across the entire frequency range. UV-Treated Foam Surround – Ensures durability and performance in all conditions, even during extended listening sessions. Dynamically Balanced 1” PEI Tweeter – Produces crisp, bright high frequencies with exceptional clarity, powered by a neodymium magnet for maximum efficiency. Integrated Crossover with Tweeter Protection – Guarantees smooth transitions between frequencies, protecting the tweeter from distortion at high volumes. Strontium Ferrite Woofer Magnet – Provides strong bass response and enhanced low-end performance for a fuller, more immersive sound. Powder-Coated, Rigid Stamped Steel Basket – Reduces unwanted vibrations and distortion, ensuring precise and stable sound reproduction. Sold in Pairs – Ideal for a balanced stereo system, providing consistent, high-quality sound across your vehicle. The H40 offers exceptional sound quality, crafted with Cerwin Vega’s engineering expertise to deliver reliable performance and precision. Whether you're upgrading your factory system or building a custom audio setup, the H40 will bring your music to life with stunning clarity and power. Elevate your sound with Cerwin Vega’s HED Series and enjoy a superior audio experience wherever you go! Specifications: POWER RATING: 150WMAX / 50WRMS FREQUENCY RESPONSE: 85HZ-20KHZ                   SENSITIVITY (1W/1M): 84DB                             NOMINAL IMPEDANCE: 4Ω     FREE-AIR RESONANCE (F0): 99HZ    MOUNTING DEPTH: 46MM / 1.81IN  CUT-OUT DIAMETER: 94MM / 3.7IN  OVERALL DIAMETER: 102MM / 4.02IN         OVERALL HEIGHT: 53MM / 2.09IN  General Features: RESPONSIVE POLYPROPYLENE CONE UV TREATED FOAM SURROUND DYNAMICALLY BALANCED 1/2'' PEI TWEETER INTEGRATED CROSSOVER WITH TWEETERPROTECTION                    NEODYMIUM TWEETER MAGNETS STRONTIUM FERRITE WOOFER MAGNET                            POWDERCOATED, RIDGID STAMPED STEEL BASKET                 SOLD IN PAIRS MESH STEEL GRILLES INCLUDED Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.