-12% sale
Rockford Fosgate Punch P600X4 600W Punch Series 4-Channel Stereo Class AB AMP
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate Punch P600X4 600W Punch Series 4-Channel Stereo Class AB AMP
$459.99 $519.00
Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-12% sale
Rockford Fosgate Punch P600X4 600W Punch Series 4-Ch Stereo Class AB Car AMP
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate Punch P600X4 600W Punch Series 4-Ch Stereo Class AB Car AMP
$459.99 $519.00
Rockford Fosgate Punch P600X4 600W Punch Series 4-Ch Stereo Class AB Car AMP The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8" 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-12% sale
Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier
$459.99 $519.00
Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.ca.gov
-12% sale
Rockford Fosgate P600X4 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate P600X4 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier
$459.99 $519.00
Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-22% sale
Alpine S-A32F S-Series 4-Channel Digital Amplifier 80 Watts RMS x 4 Alpine S-A32F S-Series 4-Channel Digital Amplifier 80 Watts RMS x 4
00
DAYS
00
HRS
00
MIN
00
SEC
Alpine Alpine S-A32F S-Series 4-Channel Digital Amplifier 80 Watts RMS x 4
$219.95 $280.00
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
-22% sale
ALPINE S-A32F 4-Channel Digital Class D Car Audio Amplifier ALPINE S-A32F 4-Channel Digital Class D Car Audio Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Alpine ALPINE S-A32F 4-Channel Digital Class D Car Audio Amplifier
$219.95 $280.00
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
-38% sale
ALPINE KTA-450 400w 4-Channel Car Amplifier Hideaway Amp Mounts Behind iLX-W650 ALPINE KTA-450 400w 4-Channel Car Amplifier Hideaway Amp Mounts Behind iLX-W650
00
DAYS
00
HRS
00
MIN
00
SEC
Alpine ALPINE KTA-450 400w 4-Channel Car Amplifier Hideaway Amp Mounts Behind iLX-W650
$219.95 $350.95
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW. General Features: Alpine KTA-450 Class D 4-channel Weather Resistant Power Pack Amplifier CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category Power Handling 50W RMS x 4 @ 4 Ohms 45W RMS x 4 @ 2 Ohms Total Power Handling: 200W RMS CTA-2006 compliant Frequency Response: 15-50 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels Fuse Rating: 15A Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-450 Package: KTA-450 Package owner's manual 4-Channel amplifier Wiring harness Mounting plate 2 Mounting brackets 4 Wire-ties 4 Hex-head machine screws 2 Pan-head machine screws 4 Pan-head self-tapping screws Warranty Information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-18% sale
Rockford Fosgate Prime R2-500X 4 Class D Amplifier <BR/> 500W 4-Channel Full Range Class D Amplifier Rockford Fosgate Prime R2-500X 4 Class D Amplifier <BR/> 500W 4-Channel Full Range Class D Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate Prime R2-500X 4 Class D Amplifier
500W 4-Channel Full Range Class D Amplifier
$329.99 $399.99
Rockford Fosgate Prime R2-500X4 500W Prime Series 4-Channel Full Range Class D Amplifier Primed for performance, the R2-500X4 is a 500-watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases. Rockford Fosgate's R2 amplifiers are the building blocks for great audio systems, powerful enough to even DRIVE our Punch speakers and subwoofers. They have undergone an amazing upgrade by packing them with the latest features at an incredible value. Best of all, they are designed and engineered here in Tempe, Arizona. General Features: Rockford Fosgate Prime R2-500X4 RMS Power Rating: 4 ohms: 75 watts x 4 Channel RMS Power Rating: 2 ohms: 125 watts x 4 Channel Bridged, 4 ohms: 250 watts x 2 Channel Total power output: 500 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeatable Auto Turn on Circuit Features C.L.E.A.N. Set-up 2/4 Channel Input Selection Switch Front and Rear Variable Input Gain adjustment level Continuously Variable On-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Rollback Protection Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Frequency Response: 20 Hz - 20 kHz Total Harmonic Distortion (THD): >1% Signal to Noise Ratio: xx dB Variable high-pass filter: 50 - 250 Hz, 24 dB/octave Variable low-pass filter: 50 - 250Hz, 24 dB/octave Recommended Fuse Rating: 80A 4-gauge power and ground wiring are recommended for installation Dimensions: 1.9" x "6.8" x "10.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-500X4 package: R2-500X4 owner's manual 4-Channel amplifier Two 7" Speaker input harnesses 3mm Allen Hex key Four 3/4" Screws 4 Flat washers Installation and Operation Instructions Certificate of Performance ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca
-31% sale
Rockford Fosgate PBR400X4D Compact 400W 4 Channel Punch Series Class D Amplifier Rockford Fosgate PBR400X4D Compact 400W 4 Channel Punch Series Class D Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate PBR400X4D Compact 400W 4 Channel Punch Series Class D Amplifier
$279.99 $399.99
Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
-31% sale
Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier
$279.99 $399.99
Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier  Primed for performance, the R2-300X4 is a 300-watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology, which reduces the vehicle's electrical system demand. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases. General Features: Rockford Fosgate Prime R2-300X4 Class-D Full-Range 4-Channel Amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged output at 4 ohms bridged mode Total power output: 3000 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up 2/4 Channel Input Selection Switch Front and Rear Variable Input Gain adjustment level Continuously Variable on-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full Range Class D Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers 1 Year Warranty Low level: 125mV-5V High level: 250mV-10V Frequency Response: 20 Hz - 20 kHz Hz Total Harmonic Distortion (THD): <1% Variable high-pass filter: 50 - 250 Hz, 24 dB/octave Variable low-pass filter: 50 - 250 Hz, 24 dB/octave Recommended Fuse Rating: 60A Dimensions: 1.9" x "6.8" x "10.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-300X4 package: R2-300X4 Owner's Manual 4-Channel amplifier Two 7" Speaker input harnesses 3mm Allen Hex key Four 3/4" Screws 4 Flat washers Installation and Operation Instructions Certificate of Performance Rockford Fosgate contact information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
-51% sale
Cerwin Vega CVP1200.4D 4-Channel 1200W Bridgeable Class D Amplifier Cerwin Vega CVP1200.4D 4-Channel 1200W Bridgeable Class D Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Cerwin Vega Mobile Cerwin Vega CVP1200.4D 4-Channel 1200W Bridgeable Class D Amplifier
$119.99 $239.99
                    Cerwin Vega CVP1200.4D 4-Channel 1200W Bridgeable Class D Amplifier The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those that are budget-conscious. And with this 1,200 Watt Max 4 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and follows standards and practices set forth by CTA (Consumer Technology Association). General Features: Cerwin Vega CVP1200.4D CVP Series 4-Channel Class D 1 Ohm Stable Amplifier RMS Power Rating: 150 Watts x 4 @ 2Ω 100 Watts x 4 @ 4Ω Total RMS power output: 600 Watts Total Peak power output: 1200 Watts Class-D Circuitry 2-Ohm Stereo, 4-Ohm Bridged Full Range Operation Handles HI and LO level input to 12V Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-6V High Level or Low-Level RCA Input Variable 12dB High, Low, & Subsonic Crossovers Fuse - 25 amp x 2 Dimensions: 11.81"W x 9.05"L x 2.09"H Authorized Internet Dealer 1-year Manufacturer's Warranty Includes official LAB vinyl sticker (2.13" x 2.75") ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
-50% sale
2 Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 2 Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate 2 Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4
$559.98 $1,100.00
2 Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
-31% sale
Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Class D Amplifier 50 watts RMS x 4 Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Class D Amplifier 50 watts RMS x 4
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Class D Amplifier 50 watts RMS x 4
$279.99 $399.99
Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
-12% sale
Alpine X-A70F Car Amplifier 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier Alpine X-A70F Car Amplifier 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Alpine Alpine X-A70F Car Amplifier 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier
$799.95 $900.00
 Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configurations, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and short speaker protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the X-A70M package: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet X-A70M owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
-41% sale
Alpine KTA-30FW Car Amplifier 600W Max, 300W RMS KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier Alpine KTA-30FW Car Amplifier 600W Max, 300W RMS KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier
00
DAYS
00
HRS
00
MIN
00
SEC
Alpine Alpine KTA-30FW Car Amplifier 600W Max, 300W RMS KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier
$419.95 $700.95
Alpine KTA-30FW 600W Max, 300W RMS KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier Half The Size, Double The Power Get a huge increase in sound performance over your factory system. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30FW Weather Resistant Tough Power Pack is sure to add higher output and increased dynamic range for those open cab vehicles and toys. The KTA-F30W is perfect for when you want to boost your sound system but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power. The KTA-30FW is ready for your adventures. It is weather-resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30FW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles. General Features: Alpine KTA-30FW Class-D Full Range 4-Ohm Stable 4-Channel Amplifier Designed for use in Side-by-Sides, Boats, Open-Top Vehicles, and Motorcycles RMS Power Rating: 4 ohms: 75 watts x 4 Channel RMS Power Rating: 2 ohms: 75 watts x 4 Channel 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) Total power output: 600 watts CEA-2006 Compliant Amplifier Power Wire Harness Included Pulse Width Modulated MOSFET power supply Wired remote bass level control included Soft start turn-on Switchable 4 or 2 channel operation Speaker-level (high-level) inputs Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink IP66 Waterproof Rating Input sensitivity: Low level: 0.2V-4V Input sensitivity: High level: 0.5V-10V Frequency Response: 15 - 36000 Hz Total Harmonic Distortion (THD): <0.1% Signal to Noise Ratio: >98 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Dimensions: 9-3/16"W x 3-3/4"D x 1-3/4"H Authorized Dealer 1-year Manufacturer's Warranty What is in the box: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter Alpine KTA-30FW Tough Power Pack owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

NATIONWIDE DELIVERY

At Absolute Pro Music, we are glad to ship to most countries! Check our list.

SECURE SHOPPING

We takes credit card information security seriously, we have implemented a variety of technical and procedural controls to ensure transactions on our site remain private and protected.

SHOP WITH CONFIDENCE

Absolute Pro Music wants to make sure that you are completely satisfied. If for some reason you aren't happy with product(s) and want to return it, we make returns simple.

HELP CENTER

You can simply give us a call at +1 800.674.27.24 , and our support staff will answer your call immediately! Explain your issue, what you'd like to change, or what you'd like to add onto your phone system, and get help in real time.
Absolute Pro Music
American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa