00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream ST4.1200D Stealth 1200W 4Channel Class D Motorcycle Car Audio Amplifier
$138.99
$269.98
Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier
Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle…
Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only)
General Features:
Total power output: 1,200watts
2-Ohms: 150 Watts x 4 channels
4-Ohms: 100 Watts x 4 channels
4-Ohms/Bridged: 300 Watts x 2 channels
High-Efficiency Class D Full-Range Amplifiers
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
2-ohm Stereo & 4-ohm Bridged Full-Range Operation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-12V High-Level or Low-Level RCA Input
Automatic Turn-On Hi-Level Signal Sensing
Quick Disconnect RCA/High-Level Wire Harness
Quick Disconnect Power and Speaker Output Harness
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
Amplifier Dimensions 3″W x 1.5″H x 7.75″W
Weight: 1.90lbs
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE KTA-450 400w 4-Channel Car Amplifier
$219.95
$350.00
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology
The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW.
General Features:
Alpine KTA-450
Class D 4-channel Weather Resistant Power Pack Amplifier
CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category
Power Handling
50W RMS x 4 @ 4 Ohms
45W RMS x 4 @ 2 Ohms
Total Power Handling: 200W RMS
CTA-2006 compliant
Frequency Response: 15-50 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
Fuse Rating: 15A
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-450 Package:
KTA-450 Package owner's manual
4-Channel amplifier
Wiring harness
Mounting plate
2 Mounting brackets
4 Wire-ties
4 Hex-head machine screws
2 Pan-head machine screws
4 Pan-head self-tapping screws
Warranty Information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & KIT0 Installation AMP Kit
$501.90
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT0 0 Gauge / 2500 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & KIT4 Installation AMP Kit
$496.90
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT4 4 Gauge / 2000 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & KIT8 Installation AMP Kit
$491.90
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT8 8 Gauge / 1000 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & KIT10 Installation AMP Kit
$486.90
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & PAK1
$481.90
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob & Absolute TW500 Piezo Super Dome Tweeter & Electrical Tape & Cell phone Mobile Bracket Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob Bundle
$476.90
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & KIT0 Installation AMP Kit
$533.40
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT0 0 Gauge / 2500 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & KIT4 Installation AMP Kit
$528.40
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT4 4 Gauge / 2000 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & KIT8 Installation AMP Kit
$523.40
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT8 8 Gauge / 1000 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A60F 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & KIT10 Installation AMP Kit
$518.40
$799.95
Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & RUX-H01 Remote Bass Knob & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback.
The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
General Features:
R-Series Class D 2 ohms Stable 4-Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 channel
RMS Power Rating: 2 ohms: 150 watts x 4 channel
RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms
Total power output: 600 watts
LED Power/Protect Light
Signal sensing remote turn-on
Hi-Res Certified
CTA-2006 compliant
Low level: 0.2 - 4 volts Input sensitivity
High level: .5 - 10 volts Input sensitivity
Frequency Response: 10 - 45000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 80 dB
Variable high-pass filter: 50 - 6,000 Hz
Variable low-pass filter: 50 - 400 Hz
Fuse Rating: 60A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11.12" L x 6.92" W x 2.14" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A60F Package:
Alpine R2-A60F owner's manual
4-Channel amplifier (2 installed 30A ATO fuses)
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
2mm Allen key
Alpine Verification Certificate
Warranty information
Power supply note
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.