00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Pioneer GM-A6704 1000W Peak (380W RMS) 4-Channel Class AB 2-Ohm Stable Car Amplifier
$190.00
$440.00
Pioneer GM-A6704 1000W Peak (380W RMS) 4-Channel Class AB 2-Ohm Stable Car Amplifier
General Information
Pioneer A-Series GM-A6704
Class-AB FullRange 2-Ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 60 watts x 4 chan.
2 ohms: 95 watts x 4 chan.
Bridged, 4 ohms: 190 watts x 2 chan.
Max power output: 1000 watts.
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
Balanced Isolator Input Circuit
LED power (on) and protect (off) indicators
Soft start turn-on
4, 3 or 2 channel operation
Speaker-level (high-level) inputs with Signal Sensing Turn-on
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity:
Low level: 300mV - 6.5V
High level: 3V - 26V
Frequency Response: 10 - 70,000 Hz
Total Harmonic Distortion (THD): <0.05%
Signal to Noise Ration: >95 dB
Selectable crossover modes (Ch A&B): LPF / OFF / HPF
Crossover frequency Ch A: 80hz, 12 dB/octave
Variable crossover frequency (Ch B): 40 - 500 Hz, 12 dB/octave
Variable Bass Boost (Ch B): 0 to +12 dB bass boost at 50 Hz
4 gauge power and ground wiring is recommended for installation.
Dimensions: 13-3/4"W x 8-1/2"L x 2-3/8"H
⚠️Warning:This product can expose you to [name of chemical], which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Pioneer GM-D10004 400W Peak 4-Channel GM Digital Series Class-D Amplifier
$180.00
$210.00
Pioneer GM-D10004 400W Peak 4-Channel GM Digital Series Class-D Amplifier
General Information
GM Digital Series 4-Channel Class-D Car Amplifier
RMS Power Rating:
4 ohms: 45 watts x 4 chan.
2 ohms: 45 watts x 4 chan.
Bridged, 4 ohms: 90 watts x 2 chan.
4 or 2 channel operation
Variable high-pass filter (80 Hz, 12 dB/octave)
Variable low-pass filter (80 Hz, 12 dB/octave)
Frequency Response: 10-40,000 Hz
Signal to Noise Ratio: 75dB
Total Harmonic Distortion (THD): <.05%
Power and Ground wiring is included
Dimensions: 7-1/8"W x 2-1/2"D x 1-1/2"H
⚠️Warning:This product can expose you to [name of chemical], which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Pioneer GM-DX874 1200 Watts Class D 4-Channel Amplifier and Bass Boost Remote
$269.99
$800.00
Pioneer GM-DX874 1200 Watts Class D 4-Channel Amplifier with Bass Remote Control
The Pioneer GM-DX874 four-channel amplifier will deliver 100 watts of RMS to your front and rear speakers for powerful music. Highly efficient Class D technology keeps this powerful amp running as cool as it looks and allows for a compact chassis that fits in many out-of-the-way spaces. The frequency response of this amplifier stretches up to 50,000 Hz to support crystal-clear Hi-Res playback. Pioneer uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Speaker-level inputs allow you to install this amp in a factory system without RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high- and low-pass filters let you adjust the sound for your vehicle's interior, whether you're driving speakers or subs.
General Features:
Pioneer GM-DX874
Full Range Class D 4 Channel Amplifier
RMS Power Rating: 4 ohms: 100 watts x 4 Channel
RMS Power Rating: 2 ohms: 150 watts x 4 Channel
RMS Power Rating: 1 ohm: 125 watts x 4 Channel
Bridged, 4 ohms: 300 watts x 2 Channel
Total power output: 1200 watts
CTA-2006 Compliant Amplifier
Wired remote bass level control included
High-Quality Textured Aluminum Panel and Tough Frame
4 channel operation
Gold-plated RCA Terminals
Aluminum Top Board
Hi-Res Audio Capable
Frequency Response: 10 - 50 Hz
Total Harmonic Distortion (THD): < 0.05% (1 kHz)
Signal to Noise Ratio: > 95 dB
Variable high-pass filter: 40 - 500 Hz, 12 dB/octave
Variable Bass Boost: 0 to 18 dB bass boost at 50 Hz
Fuse Rating: 30A x 2
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
Dimensions: "10-3/8" W x "2-3/8" H x "7-7/8" D
Authorized Internet Dealer
1-year Manufacture Warranty
What’s in the GM-DX874 package:
4-Channel Amplifier
Two 30-amp ATO fuses (installed)
Bass Boost Remote Control
Bass Boost Remote Control Cable
Speaker Level to RCA Input Adapter
Installation Screws X 4
Wire Terminal Tool
Owner's manual (English/ French)
1-Year Warranty Sheet
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crunch PZ2-2030.4D 2000 Watt Amplifier 4-Channel Car Audio Amplifier.
$109.99
$359.98
Crunch Ground Pounder PZ2-2030.4D POWERZONE 2000 Watt Amplifier 4-Channel Car Audio Amplifier.
POWER ZONE four-channel amplifier highlighted with aggressive heatsink elements feature high-level inputs utilizing SPEED-FET output devices and QTD Technology produces 2000 watts of power in a four-channel application.
General Features:
Weight 3.8 lbs
Dimensions 12 × 7 × 3.25 in
Compatible Vehicles Universal
Amp Class Class D
Amp Total Channels 4
Amp Max Power (watts) 2000
Amp Power @ 2 Ohms (ch x watts) 4 x 250
Amp Power @ 4 Ohms (ch x watts) 4 x 500
Amp Mono Bridged @ 4 Ohms (ch x watts) 2 x 1000
Amp Crossover Variable Electronic 12dB Per Octave
Amp Variable High Pass Crossover 12dB per Octave 40Hz-400Hz
Amp Variable Low Pass Crossover 12dB per Octave 40Hz-400Hz
Amp Tone Control / Parametric EQ
Built-in Bass Control
Amp Variable Voltage 0.2-6V
Amp Frequency Response 10Hz-22kHz
Amp Total Harmonic Distortion (THD) < 0.5%
Amp Speaker Level Audio Inputs Yes
Pre-amp Audio Outputs Full Range, RCA
Amp Power Terminal 12v/GND 4 AWG
Amp Speaker Terminal Wire Gauge 12 AWG
Amp Fusing
External 60A
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crunch Ground Pounder PX-1025.4 Power X Series 1,000-Watt-Max 4-Channel Class AB Amp
$129.99
$259.98
Crunch Ground Pounder PX-1025.4 Power X Series 1,000-Watt-Max 4-Channel Class AB Amp
Item Description
1,000-Watt Max Power
4 Channels X 250 Watts At 2 Ohms
4 Channels X 125 Watts At 4 Ohms
2 Channels X 500 Watts Mono Bridged At 4 Ohms
Aftermarket Amp Replaces Or Supplements Vehicle’S Existing Oem Amp
Frequency Response: 10 Hz To 22 Khz
High Sound-Quality Circuit For High Levels Of Power With Minimal Distortion
Highest Sound Quality Connection With Quality Rca Materials Helps Prevent Interference And Minimize Distortion In Signal Path
Nickel-Plated Brass Connection With Terminals For Secure Connection While Resisting Corrosion
Screw-Down Connectors Provide Easy Access For Hand Tool For A Quick And Secure Connection
Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low Voltage Circuit Which Delivers Minimal Distortion Through Amplification Process
Easily Ties Into Oem Audio Systems That Do Not Offer Rca Output To Maximize Aftermarket Amp Power
On-Board Electronic Crossover Tailors Specific Frequencies To Speakers And Subwoofers
Fully Adjustable 12 Db Electronic Crossovers
Built-In Bass Control, Switchable Amp Bass Boost 0/+6/+12 Db
High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal Impact On Electrical System
Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp End Panel
Power Terminal 12-Volt/Gnd: 4 Awg
Speaker Terminal Wire Gauge: 12 Awg
Amp Fusing: 30 Amps X 2
Dimensions: 12.94 In. X 10.81 In. X 3.81 In.
Includes Mounting Hardware
⚠️Warning
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Crunch Ground Pounder gp2000.4 2,000-watt 4-channel Class Ab Amp
$159.99
$319.98
Crunch Ground Pounder gp2000.4 2,000-watt 4-channel Class Ab Amp
Item Description
4 channels x 500 watts @ 2 ohms
4 channels x 250 watts @ 4 ohms
2 channels x 1,050 watts (mono bridged) @ 4 ohms
Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono
Variable electronic crossover: 12 dB per octave
Built-in bass control
Bass boost: Switchable: 0/+6/+12 dB
Variable voltage: .2 to 9V
Frequency response: 10 Hz to 22 kHz
RCA inputs for highest sound quality connection with quality materials that help prevent interference and minimize distortion in the signal path
Speaker level/high-level audio inputs easily tie into OED systems that do not offer RCA outputs
Maximum low voltage signal from the source unit comes into the amp through a low voltage circuit which delivers minimal distortion through the amplification process
Exclusive Crunch(R) SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
Heat sink QTD technology
Quick Thermal Dispersion technology assures the amplifier makes huge power, while running very cool with nearly undetectable musical distortions
Nickel-plated brass connection with terminals allow for secure connection while resisting corrosion
Screw-down connectors provide easy access for hand tool allowing a quick and secure connection
LED system protection circuitry diagnostics monitor overload and speaker short protection with lighted indicators on the amplifier end panel
Power terminal, 12-volt/ground: 4 gauge
Speaker terminal wire gauge: 12 gauge
Fusing: 2 x 30 amps
Includes window sticker and manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AUTOTEK MM-3025.4D 3000 Watt Compact Bridgeable 4 Channel Amplifier
$249.99
$499.98
AUTOTEK MM-3025.4D 3000 Watt Compact Bridgeable 4 Channel Amplifier
3,000-Watt Max Power
4 Channels X 750 Watts At 2 Ohms
4 Channels X 375 Watts At 4 Ohms
2 Channels Mono Bridged X 1,500 Watts
Aftermarket Class D Amp Replaces Or Supplements Vehicle’S Existing Oem Amp To Power Car’S Stereo Speakers
Can Run In 4-Channel Or Bridged-Mono Mode
Drives Additional Power With A Small Footprint
Frequency Response: 10 Hz To 22 Khz
Total Harmonic Distortion (Thd) Less Than 0.05%
Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High Speed Mosfets Bring Extreme Power With High Sound Quality And Minimum Distortion Levels
Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display And Showcase For Every Car Audio Installation
Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure Connection While Resisting Corrosion
Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And Secure Connections
Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low Voltage Circuit Which Delivers Minimal Distortion Through Amplification Process
Rca Preamp Audio Outputs And Speaker Level Audio Inputs
Rca Inputs And Outputs Provide Highest Sound Quality Connection
Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The "Output" Rca Connections Which Minimize The Need For Additional Cables Running The Length Of The Vehicle, Minimizing Noise
Onboard Variable Electronic Crossover 12 Db Per Octave
Built-In Bass Control
Amp Variable Low Pass: 40 Hz To 400 Hz
High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal Impact On Electrical System
Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp End Panel
Power Terminal 12-Volt/Gnd: 4 Awg
Speaker Terminal Wire Gauge: 12 Awg
Amp Fusing: External 80 Amps
Dimensions: 16 In. X 7 In. X 3.25 In.
Includes Mounting Hardware And Manual
WARNING - California Proposition 65
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AUTOTEK MM4020.4 Pro Power 4000W Max Mean Machine Series 2 ohm Stable 4 Channel Class-A/B Amplifier
$259.99
$519.98
AUTOTEK MM4020.4 Pro Power 4000W Max Mean Machine Series 2 ohm Stable 4 Channel Class-A/B Amplifier
Autotek Mean Machine Series MM4020.4Class-A/B 2 ohm Stable 4-Channel AmplifierPeak Power Rating:4 ohms: 500 watts x 4 chan.2 ohms: 1000 watts x 4 chan.1 ohm: ------------N/A------------Bridged, 4 ohms: 2000 watts x 2 chan.Total power output: 4000 wattsPulse Width Modulated MOSFET power supplyLED power (green) and protect (red) indicatorsSoft start turn-on4/3/2 channel operationPreamp RCA outputs to daisy chain multiple amps3-way protection circuitry (thermal, overload, and speaker short protection)Dual speaker terminals simplify the hookup of multiple speakersHeavy duty aluminum alloy heat-sinkInput sensitivity:High level: .2V-6VFrequency Response: 15 - 150HzTotal Harmonic Distortion (THD): <.05%Signal to Noise Ratio: >90 dBVariable high-pass filter: 60 - 1200HzVariable low-pass filter: 30 - 250HzVariable Bass Boost: 0 to 9 dB bass boostFuse Rating: 40A x 24 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.Authorized Internet Dealer1-year Manufacturer's Warranty
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics GE800.4 GEMINI SERIES CLASS A/B 4 Channel Amplifier 800 Watts
$258.19
$516.38
Hifonics GE800.4 GEMINI SERIES CLASS A/B 4 Channel Amplifier 800 Watts
General Features:
HIFONICS GEMINI SERIES CLASS A/B 4 CHANNEL AMPLIFIER, 800 WATTS
4 X 200 WATTS @ 2 OHMS4 X 100 WATTS @ 4 OHMS(W X H X L) 8.375″ X 2.5″ X 12″FUSES: 1 X 40A
SUPER A/B CLASS
VARIABLE LOW PASS CROSSOVER: 40HZ-300HZ
VARIABLE HIGH PASS CROSSOVER: 40HZ-300HZ
BASS BOOST- 0-9DB
SUBSONIC FILTER: 10HZ-40HZ
PHASE SHIFT: 0-180 DEGREES
FREQUENCY RESPONSE: 10HZ-22KHZ
POWER TERMINAL: 4 GA.
SPEAKER TERMINAL: 12 GA.
LOW NOISE PREAMPLIFIER CIRCUIT
HIGH/LOW LEVEL INPUTS
VARIABLE ELECTRONIC CROSSOVER
ELECTRONIC EQUALIZER
ULTRA-FI™ MOSFET POWER SUPPLY
HIGH GRADE ALUMINUM HEAT SINK
LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AUTOTEK MM2020.4 2000W Max 2-ohm Stable 4-Channel Class-A/B Amplifier
$149.99
$299.98
AUTOTEK MM2020.4 2000W Max 2-ohm Stable 4-Channel Class-A/B Amplifier
Autotek Mean Machine MM2020.4Class-A/B 2 ohm Stable 4-Channel AmplifierPeak Power Rating:4 ohms: 225 watts x 4 chan.2 ohms: 500 watts x 4 chan.1 ohm: ------------N/A------------Bridged, 4 ohms: 1000 watts x 2 chan.Total power output: 2000 wattsPulse Width Modulated MOSFET power supplyLED power (green) and protect (red) indicatorsSoft start turn-on4/3/2 Channel operationSpeaker-level (high-level) inputsPreamp RCA outputs to daisy chain multiple amps3-way protection circuitry (thermal, overload, and speaker short protection)Heavy duty aluminum alloy heat-sinkInput sensitivity:High level: .2V-10VFrequency Response: 15 - 150HzTotal Harmonic Distortion (THD): <.05%Signal to Noise Ratio: >90 dBVariable high-pass filter: 60 - 1200 HzVariable low-pass filter: 30 - 250 HzVariable Bass Boost: 0 to +9 dB bass boostFuse Rating: 25A x 24 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.Authorized Internet Dealer1-year Manufacturer's Warranty
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AUTOTEK MM1620.4 1600W Max (800W RMS) 4-Channel Class-A/B Amplifier
$139.99
$279.98
AUTOTEK MM1620.4 1600W Max (800W RMS) 4-Channel Class-A/B Amplifier
Autotek Mean Machine MM1620.4Class-A/B Full Range 4-Ohm Stable 4-Channel AmplifierRMS Power Rating:4 ohms: 200 watts x 4 chan.2 ohms: 400 watts x 4 chan.1 ohm: ------------N/A------------Bridged, 4 ohms: 800 watts x 2 chan.Total power output: 2000 wattsCEA-2006 Compliant AmplifierPulse Width Modulated MOSFET power supplyLED power (green) and protect (red) indicatorsSoft start turn-on4/3/2 channel operationSpeaker-level (high-level) inputsPreamp RCA outputs to daisy chain multiple amps3-way protection circuitry (thermal, overload, and speaker short protection)Dual speaker terminals simplify the hook up of multiple speakersHeavy duty aluminum alloy heat-sinkVariable Voltage:6V-0.2VFrequency Response: 30- 12000 HzTotal Harmonic Distortion (THD): <0.05%Signal to Noise Ratio: >90dBVariable high-pass filter: 30 - 250 Hz, 12 dB/octaveVariable low-pass filter: 30 - 250 Hz, 12 dB/octaveVariable Bass Boost: 0 to +9 dB bass boost at 50 HzFuse Rating: 20A x 24 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.Authorized Internet Dealer1-year Manufacturer's Warranty
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AUTOTEK MM1020.4 1000W Max (500W RMS) 4-Channel Class A/B Amplifier w/ Remote Level Control
$209.99
$419.98
AUTOTEK MM1020.4 1000W Max (500W RMS) 4-Channel Class A/B Amplifier w/ Remote Level Control
Autotek Mean Machine MM1020.4Class-A/B Full Range 4-Ohm Stable 4-Channel AmplifierRMS Power Rating:4 ohms: 125 watts x 4 chan.2 ohms: 250 watts x 4 chan.1 ohm: ------------N/A------------Bridged, 4 ohms: 500 watts x 2 chan.Total power output: 1000 wattsCEA-2006 Compliant AmplifierPulse Width Modulated MOSFET power supplyWired remote bass level control includedLED power (green) and protect (red) indicatorsSoft start turn-on4/3/2 or Mono channel operationSpeaker-level (high-level) inputsPreamp RCA outputs to daisy chain multiple amps3-way protection circuitry (thermal, overload, and speaker short protection)Dual speaker terminals simplify the hookup of multiple speakersHeavy duty aluminum alloy heat-sinkInput sensitivity:Low level: 125mV-5VHigh level: 250mV-10VFrequency Response: 30 - 12000 HzTotal Harmonic Distortion (THD): <0.05%Signal to Noise Ratio: >90 dBVariable high-pass filter: 60 - 1200 Hz, 12 dB/octaveVariable low-pass filter: 30 - 250 Hz, 12 dB/octaveVariable Bass Boost: 0, +6, +12 dB bass boost at 50 HzFuse Rating: 15 A x 24 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.Authorized Internet Dealer