10" Car Subwoofer (235)

JL Audio 10W6v3-D4 W6v3 Series 10" subwoofer with dual 4-ohm voice coils General Features: 10" subwoofer with dual 4-ohm voice coils mineral-filled polypropylene cone with rubber surround satin black cast-alloy basket power range: 200-600 watts RMS peak power handling: 1200 watts frequency response: 22-200 Hz sensitivity: 82.7 dB top-mount depth: 6-15/16" sealed box volume: 0.628 cubic feet ported box volume: 0.828 cubic feet grille not included Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-TSUB-TYA 10” Subwoofer & Amplifier Upgrade Kit for 2020-2025 Tesla Model Y Boost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-TYA directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful, 200W 10” sealed subwoofer without cutting or modification. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.Ultra-Efficient Power - Using Alpine’s proprietary amplifier technology, Dynamic Peak Power (DPP), the KTA-200M intelligently doubles power during dynamic musical passages for ultimate efficiency with less than a mile range used at full volume. The lightweight yet durable hybrid carbon fiber cone material reproduces precision bass without adding additional weight to your Tesla.General Features:• Designed for 2020–2025 Tesla Model Y• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness & integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2020–2025 Tesla Model Y• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz–300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-W10 2400W Peak (800W RMS) 10" Status Series Dual 4-ohm Car Subwoofer, Grille incl. Experience superior bass with the Alpine Status 10” Subwoofer. Expertly engineered for unparalleled sound quality that transforms every drive into a live concert performance.SUPERIOR BASS PERFORMANCEFeaturing the revolutionary Alpine HAMR (High Amplitude Multi-Roll) Surround technology, this subwoofer ensures maximum excursion (20mm Linear Excursion) and performance without compromising on sound quality. The carbon fiber dust cap and pulp-mica cone body are meticulously crafted to deliver durability and crystal-clear bass, even at high volumes.POWER & PRECISIONPower through your tracks with the robust 800W RMS (2400W peak) power handling. Coupled with triple-stacked high-power strontium ferrite magnets, this subwoofer ensures impeccable control and responsiveness, delivering deep, resonating bass for a truly immersive listening experience.SLEEK DESIGN, LASTING DURABILITYEngineered with a cast aluminum frame and premium aluminum trim ring, every detail is crafted to merge style with endurance. The addition of an open-mesh protective grille not only enhances its durability but also ensures your subwoofer remains safeguarded without compromising its appearance.THE ALPINE STATUS DIFFERENCEJoin the elite group of audio enthusiasts who settle for nothing but the best. Whether it's the advanced engineering ensuring consistent, reliable performance, or the sleek design that enhances your car's interior, the Alpine Status subwoofer allows your passion for pure sound to be fulfilled. General Features: High Amplitude Multi-Roll: (HAMR) Surround: (US Pat #8,208,677) Carbon Fiber: Dust Cap Pulp-Mica: Cone Body Dual Progressive: Spiders With Integrated: Tinsel Leads Cast Aluminum: Frame Copper Shorting Cap With': Integrated Radial Heat Sink Integrated Aluminum: Shorting Sleeve Compound Radius Curve: Extended Pole Geometry: (US Pat #6,639,993) Open Mesh Style: Protective Grille Premium Aluminum: Trim Ring 8AWG Insert Terminals: With Series/Parallel: Jumper Plugs 65mm Voice Coil on: Aluminum Former Triple-Stacked High Power: Strontium Ferrite Magnets Airflow Optimized: Dual Flare Pole Vent Specifications: • Size: 10" • Dimensions: 10-7/8" x 10-7/8" x 9-1/4" • Mounting Depth: 7-7/16" • Frequency Response: 24Hz - 200Hz • Power Range: 400W - 800W RMS • Power Handling: 800W RMS/2400W Peak • Magnet Weight: 174 oz (x3) • Voice Coil Diameter: 65.5 mm (2.6") BOX SPECS:Sealed Box Range: • Net Internal Volume: 0.5 - 1.5 ft³ Recommended Sealed Box: • External Dimensions: 13" x 16" x 11.5" • Gross Internal Volume: 0.97 ft³ • Net Internal Volume: 0.85 ft³ • F3, Qtc: 32Hz, 0.97 Vented Box Range: • Net Internal Volume: 1.0 - 1.75 ft³ • Tuning: 32-37HZ Recommended Vented Box: • External Dimensions: 13.25" x 23.5" x 13.25" • Gross Internal Volume: 1.76 ft³ • Vent Area (W x H): 15 in² (3.75” x 4”) • Vent Length: 18" • Vent Displacement: 0.21 ft³ • Net Internal Volume (Vb): 1.43 ft³ • F3, Ripple, Fb: 26Hz, 8.4 dB, 35Hz THIELE-SMALL PARAMETERS • Sensitivity (1W/1m): 82.2 dB • DC Resistance: 6.36Ω • Inductance: 36.3 mH • Free Air Resonance: 33Hz • Equivalent Stiffness: 15.24 L • Mechanical Q: 5.43 • Electrical Q: 0.77 • Total Q: 0.68 • Cone Area: 305 cm² • Linear Excursion: 20 mm • Mechanical Travel: 82 mm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik EW-104S 1200W Class S RMS Subwoofer The Power Acoustik EW-104S is a shallow-mount 10-inch subwoofer designed for tight-fit installations where standard-depth enclosures are not feasible. As part of the Edge Series, this model strikes a balance between power, precision, and space-conscious design, making it a solid option for sealed and compact vehicle subwoofer applications. With 1200 watts peak and 600 watts RMS power handling, the EW-104S provides strong low-end output without demanding oversized enclosures or excessive power draw. The 4-ohm single voice coil configuration pairs easily with most mono or multi-channel car amplifiers. Built with a polypropylene cone, stamped steel basket, and a 2-inch 4-layer copper voice coil, this subwoofer maintains cone rigidity and long-term thermal stability. A 60 oz magnet structure delivers steady motor force for accurate bass control, even in sealed boxes with a volume of less than 0.75 cubic feet. General Features: 10″ shallow-mount subwoofer, ideal for under-seat or tight trunk installs 1200W max power, 600W RMS 4-ohm single voice coil, copper wound, 2″ diameter Mounting depth: ~2.5″ for space-limited enclosures Sensitivity: 81.3 dB, responsive to moderate power Frequency response: 25Hz – 250Hz Polypropylene cone with treated foam surround Sealed box optimization, recommended ~0.75 ft³ enclosure volume Specifications EW-104S Max Power Handling 1,200 Watts RMS Power Handling 600 Watts Efficiency (1w/1m) 81.30 Voice Coil Configuration 2.00″ 4Ω Motor Volume 60oz Mounting Depth 2.50″ Optimum Sealed Enclosure ft³ 0.75   The EW-104S is tuned for those seeking deep bass in minimal space. Whether you’re configuring a stealth system, upgrading factory sub performance, or simply want strong lows without compromising trunk volume, this 10-inch shallow-mount subwoofer gets the job done. It aligns with searches like “power acoustik 10 inch subwoofer”, “shallow mount subs 10”, “1200w 4-ohm car subwoofer”, and “edge series 10 inch car subwoofer”, all while keeping real specs front and center. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Cerwin Vega H7104S HED Series 10" SVC Subwoofer (4Ω) Cerwin Vega Subwoofers are renowned for producing high-quality units favored by car audio enthusiasts for their durability, power handling, and exceptional sound performance. Cerwin Vega subwoofers combine advanced engineering with high-quality materials to deliver robust and reliable bass performance, making them a top choice for car audio enthusiasts looking to enhance their audio experience.   2 Ohm or 4 Ohm Configuration, these subwoofers are available in different impedance configurations (2 ohm or 4 ohm), providing flexibility for various wiring setups and compatibility with different amplifiers. This allows you to optimize your system for maximum performance.  HED Series Subwoofers can handle substantial power, making them suitable for high-output applications. They are designed to handle high wattage without distortion, ensuring clean, powerful bass. Specifications: SPEAKER SIZE - 10” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM VOICE COIL DIAMETER - INCH (MM) - 2” THIELE/SMALL PARAMETERS SENSITIVTY (1W/1M): 85DB VAS (L): 40.4 XMAX (MM): 7(MM) POWER HANDLING RMS: 200W POWER HANDLING MAX: 1000W MOUNTING DIAMETER: 9.7” (246.4MM) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Precision Power AW-10D4 ATOM Series 10″ D4 Subwoofers Intriguing from the first look, ATOM subwoofers offer more than what meets the eye… The first thing you noticed was the wild dustcap; it’s not just for your viewing pleasure. The three fins brace the cone and eliminate cone flex during high excursion. And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Essential to keeping the subwoofers more relaxed and helping them last longer. ATOM subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth low bass. This new series for Precision Power will use an aluminum dust cap that couples to the voice coil former and extends over the cone. Sparing no compromise, the ATOM series’s motor assembly includes an extended tap-top plate that expands the magnetic field, resulting in dynamic sounds & performance quality you demand and expect. ATOM subwoofers are engineered to be a pinnacle of Precision Power, delivering you absolutely state-of-the-art mobile audio. General Features: 10" Dual 4 ohm Atom Series Subwoofer Power Handling: Peak: 1000 watts RMS: 500 watts Non-Transfer Spruce Pulp cone with UV and chemical protection 2.5"4-layer oxygen-free Copper voice coil on Aluminum former Cast aluminum heatsink dust cap coupled to the voice coil former Dual poly-cotton suspension maintains magnetic gap linearity Hot forged 1-piece 10mm top plate with +5mm expanded magnetic gap Hot forged 1-piece 10mm T-yoke with center pole and back plate venting 22.5 mm Xmax Single-stacked magnet motor structure Resonance Frequency (Fs): 29.24 Hz Sensitivity: 82.20 dB Recommended sealed box volume: .75 cubic feet Recommended ported box volume: 1.5 cubic feet Top-mount depth: 5.5" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Precision Power AW-10D2 ATOM Series 10″ D2 Subwoofers Intriguing from the first look, ATOM subwoofers offer more than what meets your eyes… The first thing you noticed was the wild dustcap; it’s not just for your viewing pleasure. The three fins brace the cone and eliminate cone flex during high excursion. And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Essential to keeping the subwoofers more relaxed and helping them last longer. ATOM subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth, low bass. This new series for Precision Power will use an aluminum dust cap that couples to the voice coil former and extends over the cone. Sparing no compromise, the ATOM series’s motor assembly includes an extended tap top plate, which expands the magnetic field results in dynamic sounds & performance quality you demand and expect. ATOM subwoofers are engineered to be the pinnacle of Precision Power, delivering you absolutely state-of-the-art mobile audio. General Features: 10" Dual 4 ohm Atom Series Subwoofer Power Handling: Peak: 1000 watts RMS: 500 watts Non-Transfer Spruce Pulp cone with UV and chemical protection 2.5"4-layer oxygen-free Copper voice coil on Aluminum former Cast aluminum heatsink dust cap coupled to the voice coil former Dual poly-cotton suspension maintains magnetic gap linearity Hot forged 1-piece 10mm top plate with +5mm expanded magnetic gap Hot forged 1-piece 10mm T-yoke with center pole and back plate venting 22.5 mm Xmax Single-stacked magnet motor structure Resonance Frequency (Fs): 29.24 Hz Sensitivity: 82.20 dB Recommended sealed box volume: .75 cubic feet Recommended ported box volume: 1.5 cubic feet Top-mount depth: 5.5" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DPUS10 400W Peak (200W RMS) Loaded Single 10" Sealed Underseat Enclosure with Bass Remote  The DPUS10, an addition to Diamond’s line of under-seat enclosures, boasts unique features designed to simplify installation, address audio issues from the OEM vehicle’s audio signal, and alleviate space concerns. The DPUS10 offers 20V line-level inputs and auto turn-on circuits for OEM integration. To combat poor OEM signal quality, the DPUS10 features dual bass controls, one for level and the second with Diamonds’ exclusive bass enhancement engine. The DPUS10 also includes the standard low-pass, subsonic filters, and phase adjustments. Notably, the enclosure/amplifier housing is remarkably compact, yet solid with its cast aluminum construction, ensuring it fits a wide range of applications while delivering impressive output from the onboard 10 inch powered subwoofer and 200WRMS amplifier. This compact design reassures you that the DPUS10 will not only enhance your audio experience but also save valuable space in your vehicle. General Features Single 10" Sealed Loaded Subwoofer Enclosure with Built-In Amplifier Power Handling: Peak: 400 watts RMS: 200 watts Built-in Class D amplifier Includes bass remote for Diamond Bass Enhancement Engine (DBEE) DBEE signal bandwidth adjustment feature Super-slim Under seat subwoofer enclosure Gauge power and ground wiring is recommended for installation Enclosure Dimensions: 13.58" L x 9.65" W x 2.76" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" DMD Series Subwoofer Polypropylene Cone Nitrile Butadiene Rubber NBR Surround Slim and shallow subwoofer construction Black spider with woven tinsel leads Vented pole piece for cooler operation Klippel optimized motor and suspension symmetry Sensitivity: 84.0 dB Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Thermal, short, and overload protection circuits Auto turn-on signal circuit Speaker-level (high-level) inputs 120 volts high-level and low-level inputs PWM MOSFET power supply for reliable connection Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 16 dB Subsonic Filter: 20 Hz (fixed) RCA Preamp Output: No Fuse Rating: 30A x 1  Enclosure Features: 10" Sealed Enclosure Box Finish: Black Aluminum Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega H7104S HED Series 10" SVC Subwoofer (4Ω) Cerwin Vega Subwoofers are renowned for producing high-quality subwoofers that are favored by car audio enthusiasts for their durability, power handling, and exceptional sound performance. Cerwin Vega subwoofers combine advanced engineering with high-quality materials to deliver robust and reliable bass performance, making them a top choice for car audio enthusiasts looking to enhance their audio experience.   2 Ohm or 4 Ohm Configuration, these subwoofers are available in different impedance configurations (2 ohm or 4 ohm), providing flexibility for various wiring setups and compatibility with different amplifiers. This allows you to optimize your system for maximum performance.  HED Series Subwoofers can handle substantial power, making them suitable for high-output applications. They are designed to handle high wattage without distortion, ensuring clean, powerful bass. Specifications: SPEAKER SIZE - 10” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM VOICE COIL DIAMETER - INCH (MM) - 2” THIELE/SMALL PARAMETERS SENSITIVTY (1W/1M): 85DB VAS (L): 40.4 XMAX (MM): 7(MM) POWER HANDLING RMS: 200W POWER HANDLING MAX: 1000W MOUNTING DIAMETER: 9.7” (246.4MM) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega XE10DV XED Series Dual 10" Loaded Vented Enclosure (2Ω) Cerwin Vega Subwoofers are renowned for producing high-quality subwoofers that are favored by car audio enthusiasts for their durability, power handling, and exceptional sound performance. Cerwin Vega subwoofers combine advanced engineering with high-quality materials to deliver powerful and reliable bass performance, making them a top choice for car audio enthusiasts looking to enhance their audio experience.   2 Ohm or 4 Ohm Configuration, These subwoofers are available in different impedance configurations (2 ohm or 4 ohm), providing flexibility for various wiring setups and compatibility with different amplifiers. This allows you to optimize your system for maximum performance.  XED Series Subwoofers are capable of handling substantial amounts of power, making them suitable for high-output applications. They are designed to handle high wattage without distortion, ensuring clean, powerful bass. Specifications: XE10DV Dual 10" Subwoofers Nominal Impedance: 2Ω Power Handling: 450W RMS/1600W Max Dimensions(LxWxH): 25.9”x10.0”x 11.8”(659mm x 255mm x 300mm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega XE10SV XED Series 10" Subwoofer Vented Enclosure Cerwin Vega Subwoofers are renowned for producing high-quality subwoofers that are favored by car audio enthusiasts for their durability, power handling, and exceptional sound performance. Cerwin Vega subwoofers combine advanced engineering with high-quality materials to deliver powerful and reliable bass performance, making them a top choice for car audio enthusiasts looking to enhance their audio experience.   2 Ohm or 4 Ohm Configuration, these subwoofers are available in different impedance configurations (2 ohm or 4 ohm), providing flexibility for various wiring setups and compatibility with different amplifiers. This allows you to optimize your system for maximum performance.  XED Series Subwoofers are capable of handling substantial amounts of power, making them suitable for high-output applications. They are designed to manage high wattage without distortion, ensuring clean and powerful bass. Specifications: SPEAKER SIZE - 10” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 2 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM FREQUENCY RESPONSE (HZ): 20HZ-500HZ VOICE COIL DIAMETER - INCH (MM) - 2” POWER HANDLING RMS: 225W POWER HANDLING MAX: 800W MOUNTING DIAMETER : 370.84MM Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega H6E10DV HED Series Dual 10” Vented Subwoofer Enclosure (Passive) The HED SERIES Loaded Enclosures are designed and engineered to generate maximum bass output. The custom factory-tuned vented enclosures are the result of long hours of precise subwoofer measurements and listening sessions culminating in a Loaded Enclosures that delivers tremendous bass. Specifications: SPEAKER SIZE - 10” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 2 NUMBER OF VOICE COILS - DUAL CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) INCLUDES SPEAKER GRILL - YES SURROUND MATERIAL - TREATED FOAM FREQUENCY RESPONSE (HZ): 20HZ-500HZ VOICE COIL DIAMETER - INCH (MM) - 2” POWER HANDLING RMS: 500W POWER HANDLING MAX: 2000W MOUNTING DIAMETER : 762MM GRILL: YES Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.