10" Car Subwoofer (218)

Alpine RS-W10D2 12" 1200 Watts Shallow Mount Dual 2-Ohm Voice Coil R Series subwooferAlpine's RS-W10D2 R-Series With an ultra-shallow subwoofer design and powerful sound output, the R-Series Shallow Subwoofers give you the best of both worlds in size and sound. General Features: 10" Dual 2 ohms Type-R Series Shallow Subwoofer Peak Power Handling: 1200 watts RMS Power Handling: 600 watts Polypropylene with aluminum dust cap Cone Butyl Rubber Surround Alpine Gen2 DD Linear Magnetic Circuit Cast aluminum basket 4" High-Temperature Voice coil 20 mm Xmax Neodymium magnet motor structure Frequency Response: 29 - 200 Hz Resonance Frequency (Fs): 28 Hz Sensitivity: 81 dB Top-mount depth: 3.25" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the RS-W10D2 package: RS-W10D2 Owner's Manual 10" R-Series Shallow Subwoofer Warranty Information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series next generation R2-W10D4 10" 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer + Absolute VGS12 Ported Box                          Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring  Four 3" jumper cables  R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

4 Cerwin Vega V102DV2 10" inch Dual 2 Ohm Subwoofer 1100 Watt Car Audio Sub DVC Cerwin Vega 10" Subwoofer DVC Vega Series V102DV2 Cerwin Vega Mobile subwoofers are designed and engineered to produce extreme bass in your vehicle, and the V102DV2 10" dual 2-ohm subwoofer is no exception. Packing in an optimized high-powered motor structure along with a stamped carbon fiber polypropylene cone, this subwoofer is built to deliver you nothing but quality bass. Its structure also features a vented pole piece for additional cooling, ensuring you get the most out of your subwoofer. This compact sub also features Cerwin Vega's signature red surround, so your system can look as good as it sounds. See below for more features and specifications.  General Features: 10" Dual 2 ohm Vega Series Subwoofer Power Handling: Peak: 1100 watts RMS: 400 watts Parabolic one-piece stamped carbon fiber polypropylene cone Double-stitched Vega red Santoprene surround 2.5" Voice Coil Vega concealed mounting gasket Proprietary Stamped Cast Vega Basket Design Top-mount depth: 5.43" Cutout Diameter: 8.82" Sensitivity: 85dB High power integrated impedance selector Optimized high-power single-stacked motor structure Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R2S-1X10 400W Peak Prime Series (R2SD4) Single 10" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 10" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X10 is a 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 10" Loaded Sealed Box sealed truck-style enclosure with one 10" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 10" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 400 watts Power Handling RMS: 200 watts Recommended power range: 100 - 200 watts RMS frequency response: 38-250 Hz sensitivity: 83 dB Weight: 19.9 lbs Dimensions: 5-1/4"BD x 3-1/4"TD x 19-1/8"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X10 package: R2S-1X10 Owners Manual Sealed enclosure loaded with one 10" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R2S-1X10 400W Peak Prime Series (R2SD4) Single 10" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 10" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X10 is a 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 10" Loaded Sealed Box sealed truck-style enclosure with one 10" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 10" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 400 watts Power Handling RMS: 200 watts Recommended power range: 100 - 200 watts RMS frequency response: 38-250 Hz sensitivity: 83 dB Weight: 19.9 lbs Dimensions: 5-1/4"BD x 3-1/4"TD x 19-1/8"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X10 package: R2S-1X10 Owners Manual Sealed enclosure loaded with one 10" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel, along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond-cut cast aluminum trim ring. An optional grille insert is available. General Features: 10" Dual 4-ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique Stamp Cast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-10: Rockford Fosgate P2D4-10 owner's manual One 10" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P3SD2-10 600W Peak (300W RMS) 10" Punch Series Dual 2-ohm Shallow Car Subwoofer Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer lightweight and easier to drive, yet rigid enough to maintain its shape when played at high volumes. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to withstand the test of time.Powerful bass for a tight spaceA low-profile frame houses the sub, featuring ample venting to combat overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate Punch P3SD2-10 600W Peak (300W RMS) 10" Punch Series Dual 2-ohm Shallow Car Subwoofer Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer lightweight and easier to drive, yet rigid enough to maintain its shape when played at high volumes. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to withstand the test of time.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate Punch P3SD4-10 600W Peak (300W RMS) 10" Punch Series Dual 4-ohm Shallow Car SubwooferRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer lightweight and easier to drive, yet rigid enough to maintain its shape when played at high volumes. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to withstand the test of time.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Peak Power Handling: 600 watts  RMS Power Handling: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohms Anodized aluminum heat-sinking cone & dust cap for strength and durability Tall profile, true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.