Alpine (1199)

2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 2 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D2 package: R2-W12D2 owner's manual One 12" Dual 2-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they are designed to fit easily in virtually any system. This amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs What's in the BBX-T600 package: BBX-T600 owner's manual Two Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine HDZ-65 600W Status Hi-Res 6.5” (16.5cm) 2-way Coaxial Speakers Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-65 Coaxial 2-Way speakers with a high-resolution bandwidth of 55Hz – 40kHz include 170mm door woofers with integrated 40mm Slim-Fit tweeters.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the AlpineF#1Status speaker's look and feel, using a similar construction, motor assembly, and identical build materials for the highest sound quality. General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Carbon Composite cone material Double-Gathered Edge speaker surround 1" Dome Tweeters CEA-2031 compliant: Yes Top-mount Depth: 2.63" Cutout Dimensions: 6.77" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the HDZ-65 package : HDZ-65 owner's manual Two 2-way Speakers 2 Grilles Eight 1-1/8" Screws 8 Speed clips Owner's manual Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine HDZ-65C 600W Status Hi-Res 6-1/2" (16.5cm) 2-Way Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-65C 2-Way component speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer and a 70mm ring-radiator tweeter with a 25mm voice coil. They also include high-end speaker x-overs.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the Alpine F#1 Status speaker's look and feel, using a similar construction, motor assembly, and identical build materials for the highest sound quality. General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material Rubber speaker surround 1" Composite Cone Tweeters Ferrite magnet motor structure Top-mount Depth: 2 11/16" Cutout Dimensions: 5 5/8" Impedance: 4 ohms Frequency Response: 55 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the HDZ-65C package: HDZ-65C owner's manual Two woofers Two woofer grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" Woofer mounting screws Four 1-1/8" Crossover mounting screws Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. Shipping: Free Shipping on all orders over $35.

2 Alpine HDZ-65CS 600W Status Hi-Res 6-1/2" (16.5cm) 2-Way Slim-fit Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution Alpine F#1 Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration. Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-65CS Slim-Fit 2-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer and a 40mm Slim-Fit tweeter easy to install in the original tweeter locations of your car. They also include high-end speaker x-overs. All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the AlpineF#1Status speaker's look and feel, using a very similar construction and motor assembly, as well as identical build materials for the highest sound quality General Features: 3-1/2" 2-way Component System Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material speaker surround 1" Dome Tweeters CEA-2031 compliant: Voice coil Ferrite magnet motor structure Top-mount Depth: Cutout Dimensions: Impedance: Frequency Response: 55 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the HDZ-65 package : HDZ-65C owner's manual Two woofers Two woofer grilles Two tweeters Two flush-mount housings (with tweeters installed) Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" Woofer mounting screws Four 1-1/8" Crossover mounting screws Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. Shipping: Free Shipping on all orders over $35.

2 Alpine KTE-10G.3 10" Protective Subwoofer Grille for Alpine R2-W10D4 and R2-W10D2 10" subwoofers General Features: 10" Protective Subwoofer Grille Works with Alpine R2-W10D4 and R2-W10D2 10" subwoofers Includes metal mesh grille  Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Black metal mesh grille Installation instructions KTE-10G.3 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTE-12G.3 12" Protective Subwoofer Grille for Alpine R2-W12D4 and R2-W12D2 12" subwoofers General Features: 12" Protective Subwoofer Grille Works with Alpine R2-W12D4 and R2-W12D2 12" subwoofers Includes metal mesh grille  Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Black metal mesh grille Installation instructions KTE-12G.3 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers TURN IT UP If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the R-S65C.2 package: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box R-S65C.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R-S69.2 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers Bundle with METRA 72-7800 Speaker Connector Harness For 1986-2011 Honda Civic (2 items) R-Series speakers give you power and control. With an innovative material that delivers more output, the speakers produce a dependable performance for a loud and fun experience. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. General Features: Alpine R-S69.2 R-Series 6x9 Inch Coaxial 2-Way Speakers Power Handling: RMS: 100 Watts Peak: 300 Watts Impedance: 4 Ohm Carbon-fiber reinforced polymer (CFRP) woofer Carbon-fiber reinforced polymer dome tweeter Frequency response: 60 Hz - 40 kHz Sensitivity: 90 dB Top-mount depth: 2-7/8" Grilles included Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way Speakers 2 Bottom mount brackets 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x60mm Machine screws (with split lock washers attached) 8 Split lock washers 8 Flat washers Eight M4 Hex nuts 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Alpine R-S69.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov  

2 Alpine R-S69.2 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers R-Series speakers give you power and control. With an innovative material that delivers more output, the speakers produce a dependable performance for a loud and fun experience. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. General Features: Alpine R-S69.2 R-Series 6x9 Inch Coaxial 2-Way Speakers Power Handling: RMS: 100 Watts Peak: 300 Watts Impedance: 4 Ohm Carbon-fiber reinforced polymer (CFRP) woofer Carbon-fiber reinforced polymer dome tweeter Frequency response: 60 Hz - 40 kHz Sensitivity: 90 dB Top-mount depth: 2-7/8" Grilles included Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way Speakers 2 Bottom mount brackets 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x60mm Machine screws (with split lock washers attached) 8 Split lock washers 8 Flat washers Eight M4 Hex nuts 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Alpine R-S69.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov