Subwoofers with Boxes (57)

Cerwin Vega VPAS10 / VR10 Under Seat Subwoofer Enclosure + Absolute KIT4 4G AMP Kit car stereo amplifier installation kit Cerwin Vega VPAS10 Under Seat Subwoofer Enclosure The legendary mobile audio industry brand announces its very first powered active subwoofer, the VPAS10 (Vega Powered Active Subwoofer). It consists of an active 10" subwoofer amplified for extreme output. Encased in a solid cast aluminum body frame for superior heat dissipation, the VPAS10 is compact enough to install in the tightest spaces without sacrificing performance. General Features: 10" Low Profile Amplified Subwoofer Power Handling: Peak: 550 watts RMS: 200 watts PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs Delayed Soft Remote Turn On Adjustable Input Sensitivity Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees Fuse Rating: 25A x 1 Dimensions: 13.60" L x 9.60" W x 2.60" H (approx) Absolute KIT4 4 Gauge Amplifier Wiring Kit Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega VR10 10" Active Under Seat Subwoofer Enclosure CERWIN-VEGA MOBILE’S assortment of award-winning VEGA ACTIVE POWERED SUBWOOFERS provides the ultimate all-in-one Bass Solution Package without taking up any valuable trunk space. With a fully integrated amplifier encased in a cast-aluminum heat sink, and the subwoofer, simple plug-and-play operation is achieved. General Features: Single 10" Sealed Loaded Slim Subwoofer Enclosure with Built-In Amplifier Peak Power Handling: 300 watts RMS Power Handling: 120 watts Final Impedance: 4-ohm Built-in Class D amplifier Sealed Underseat enclosure Compact and slim design, fits under the seat or in the trunk Fully integrated amplifier encased in a cast aluminum heatsink Simple plug-and-play operation and installation PWM MOSFET power supply with thermal protection circuit 8 AWG gauge power and ground wiring is recommended for installation Enclosure Dimensions: 9" TD x 9" W x 3" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" Subwoofer Polypropylene Subwoofer Cone Rubber Subwoofer Surround High-temperature voice coil VEGA Series Frequency Response: 20 - 180 Hz Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Wired remote subwoofer control included Adjustable input sensitivity Delayed soft remote turn on Phase Inversion Switch: 0 or 180 degrees Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 12 dB Subsonic Filter: Fixed at 20 Hz RCA Preamp Output: No Speaker-level (high-level) inputs Low Level Input sensitivity: 0.3 - 5 volts High Level Input sensitivity: 0.9 - 12 volts Fuse Rating: 20A x 1  Enclosure Features: 10" Sealed Enclosure Cast aluminum heatsink enclosure for durability Box Finish: Black Coated Tough Guard Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Alpine S-W10D4 10"  Type S Car Audio Subwoofer with Absolute SS10 Custom Sub Box Enclosure Package This Package Includes the Following Items: 1 x Absolute SS10 Car Audio Single 10" Sealed Subwoofer Sub Box Enclosure MDF Wood 1 x Alpine S-W10D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 10" Subwoofer Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer General Features: 10" 4 ohm S-Series (Type-S) Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D4 package: Alpine S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This combined with a front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega RPM104SL RPM Series 10" SVC Marine Subwoofer w/White Grill (4Ω) The Cerwin Vega RPM104SL 10" SVC 4Ω RPM Series Subwoofer is a high-quality, waterproof subwoofer designed for marine and outdoor applications. With its robust construction, including a stamped basket, nomic spider, and extended back plate, it provides durability and excellent performance in challenging environments. The subwoofer’s versatile design makes it suitable for both sealed and ported enclosures, while built-in RGB LED lighting adds a customizable aesthetic element. Push terminals facilitate easy wiring, and the 1-year manufacturer’s warranty ensures reliability and peace of mind. This subwoofer is an excellent choice for those seeking powerful bass and great value in their audio systems. The Cerwin Vega RPM104SL is a 10" SVC 4Ω RPM Series subwoofer designed for marine and outdoor use. It combines high performance with durability, making it a great value for audio enthusiasts seeking robust bass in challenging environments. Here are the detailed features and specifications of the Cerwin Vega RPM104SL subwoofer: General Features: Speaker Configuration: 200W RMS/400W MAX - 10" Single Voice Coil 4Ω Subwoofer Waterproof Design: Engineered to withstand harsh marine environments, including exposure to water and salt. Stamped Basket: Ensures a sturdy and durable structure for the subwoofer. Nomic Spider: Enhances the subwoofer’s suspension and improves overall performance. Extended Back Plate: Provides better thermal management and reduces distortion. Sound Quality Enhancements: Great for Sealed or Ported Applications: Versatile design allows for use in various types of enclosures, enhancing flexibility in installation. Built-in RGB LED Lighting: Adds a customizable lighting element for visual appeal. Convenience and Warranty: Push Terminals: Simplify wiring and connection processes. 1-Year Manufacturer's Warranty: Provides peace of mind with coverage against manufacturing defects. Specifications: SPEAKER SIZE - 10” SPEAKER TYPE - SUBWOOFER OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE BASKET MATERIAL - FIBREGLASS REINFORCED POLYMER MAGNET TYPE - FERRITE (CERAMIC) INCLUDES SPEAKER GRILL - YES SURROUND MATERIAL - TREATED CLOTH , WATER RESISTANCE - IPX5 ""VOICE COIL DIAMETER - INCH (MM) - 2"""""" SENSITIVTY (1W/1M): 87DB XMAX (MM): .48"" 12.3(MM) POWER HANDLING RMS: 200W POWER HANDLING MAX: 400W MOUNTING DIAMETER : 9.1” (231MM) GRILL: YES Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega VR10 10" Active Under Seat Subwoofer Enclosure + 2 Pair H746 4x6" front/rear truck speakers + 2 Pair Metra 72-4500 Speaker Harness Compatible Fits 1988-1994 GM C/K 1500, 2500 Cerwin Vega VR10 10" Active Under Seat Subwoofer Enclosure CERWIN-VEGA MOBILE’S assortment of award-winning VEGA ACTIVE POWERED SUBWOOFERS provides the ultimate all-in-one Bass Solution Package without taking up any valuable trunk space. With a fully integrated amplifier encased in a cast-aluminum heat sink, and the subwoofer, simple plug-and-play operation is achieved. General Features: Single 10" Sealed Loaded Slim Subwoofer Enclosure with Built-In Amplifier Peak Power Handling: 300 watts RMS Power Handling: 120 watts Final Impedance: 4-ohm Built-in Class D amplifier Sealed Underseat enclosure Compact and slim design, fits under the seat or in the trunk Fully integrated amplifier encased in a cast aluminum heatsink Simple plug-and-play operation and installation PWM MOSFET power supply with thermal protection circuit 8 AWG gauge power and ground wiring is recommended for installation Enclosure Dimensions: 9" TD x 9" W x 3" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" Subwoofer Polypropylene Subwoofer Cone Rubber Subwoofer Surround High-temperature voice coil VEGA Series Frequency Response: 20 - 180 Hz Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Wired remote subwoofer control included Adjustable input sensitivity Delayed soft remote turn on Phase Inversion Switch: 0 or 180 degrees Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 12 dB Subsonic Filter: Fixed at 20 Hz RCA Preamp Output: No Speaker-level (high-level) inputs Low Level Input sensitivity: 0.3 - 5 volts High Level Input sensitivity: 0.9 - 12 volts Fuse Rating: 20A x 1  Enclosure Features: 10" Sealed Enclosure Cast aluminum heatsink enclosure for durability Box Finish: Black Coated Tough Guard 2 Pair Cerwin Vega H7683 6" x 8" HED Series 3-Way Coaxial Car/Truck Speakers Two pairs of 6" x 8" Series 3-way car/truck speakers Power handling: Peak 720 watts per pair / RMS 120 watts per pair Graphite-injected reinforced polypropylene spun cone for accurate sound reproduction Rubber surround for durability 1" balanced dome PEI polypropylene tweeter and 0.5" balanced dome PEI polypropylene tweeter for clear highs Top-mount depth: 2.44" Cutout dimensions: 7.362" x 5" 4-ohm impedance Frequency response: 55-20,000 Hz 2 Pair Metra 72-4500 Speaker Adapter Harness Fit 1988-1994 GM C/K 1500, 2500 Speaker adapter harnesses for easy installation Connects aftermarket speakers to the factory speaker harness Quick and easy installation Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega VR10 10" Active Under Seat Subwoofer Enclosure + 2 Pair H7683 6x8" front/rear truck speakers + 2 Pair Metra 72-5600 Speaker Harness Compatible Fits 2009-14 Ford F-150 Cerwin Vega VR10 10" Active Under Seat Subwoofer Enclosure CERWIN-VEGA MOBILE’S assortment of award-winning VEGA ACTIVE POWERED SUBWOOFERS provides the ultimate all-in-one Bass Solution Package without taking up any valuable trunk space. With a fully integrated amplifier encased in a cast-aluminum heat sink, and the subwoofer, simple plug-and-play operation is achieved. General Features: Single 10" Sealed Loaded Slim Subwoofer Enclosure with Built-In Amplifier Peak Power Handling: 300 watts RMS Power Handling: 120 watts Final Impedance: 4-ohm Built-in Class D amplifier Sealed Underseat enclosure Compact and slim design, fits under the seat or in the trunk Fully integrated amplifier encased in a cast aluminum heatsink Simple plug-and-play operation and installation PWM MOSFET power supply with thermal protection circuit 8 AWG gauge power and ground wiring is recommended for installation Enclosure Dimensions: 9" TD x 9" W x 3" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" Subwoofer Polypropylene Subwoofer Cone Rubber Subwoofer Surround High-temperature voice coil VEGA Series Frequency Response: 20 - 180 Hz Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Wired remote subwoofer control included Adjustable input sensitivity Delayed soft remote turn on Phase Inversion Switch: 0 or 180 degrees Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 12 dB Subsonic Filter: Fixed at 20 Hz RCA Preamp Output: No Speaker-level (high-level) inputs Low Level Input sensitivity: 0.3 - 5 volts High Level Input sensitivity: 0.9 - 12 volts Fuse Rating: 20A x 1  Enclosure Features: 10" Sealed Enclosure Cast aluminum heatsink enclosure for durability Box Finish: Black Coated Tough Guard 2 Pair Cerwin Vega H7683 6" x 8" HED Series 3-Way Coaxial Car/Truck Speakers Two pairs of 6" x 8" Series 3-way car/truck speakers Power handling: Peak 720 watts per pair / RMS 120 watts per pair Graphite-injected reinforced polypropylene spun cone for accurate sound reproduction Rubber surround for durability 1" balanced dome PEI polypropylene tweeter and 0.5" balanced dome PEI polypropylene tweeter for clear highs Top-mount depth: 2.44" Cutout dimensions: 7.362" x 5" 4-ohm impedance Frequency response: 55-20,000 Hz 2 Pair Metra 72-5600 Speaker Adapter Harness Fit Select Ford 2009-2014 F-150 Speaker adapter harnesses for easy installation Connects aftermarket speakers to the factory speaker harness Quick and easy installation Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega XED62 6.5" & XED693 6x9" Speakers & VR10 10" Powered Subwoofer + Metra 72-7401 Speaker Harness + Metra 82-7400 Speaker Adapter Compatible Fit 2004-15 Nissan Titan Cerwin Vega VR10 Under Seat Subwoofer Enclosure CERWIN-VEGA MOBILE’S assortment of award-winning VEGA ACTIVE POWERED SUBWOOFERS provides the ultimate all-in-one Bass Solution Package without taking up any valuable trunk space. With a fully integrated amplifier encased in a cast-aluminum heat sink, and the subwoofer, simple plug-and-play operation is achieved. General Features: Single 10" Sealed Loaded Slim Subwoofer Enclosure with Built-In Amplifier Peak Power Handling: 300 watts RMS Power Handling: 120 watts Final Impedance: 4-ohm Built-in Class D amplifier Sealed Underseat enclosure Compact and slim design, fits under the seat or in the trunk Fully integrated amplifier encased in a cast aluminum heatsink Simple plug-and-play operation and installation PWM MOSFET power supply with thermal protection circuit 8 AWG gauge power and ground wiring is recommended for installation Enclosure Dimensions: 9" TD x 9" W x 3" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" Subwoofer Polypropylene Subwoofer Cone Rubber Subwoofer Surround High-temperature voice coil VEGA Series Frequency Response: 20 - 180 Hz Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Wired remote subwoofer control included Adjustable input sensitivity Delayed soft remote turn on Phase Inversion Switch: 0 or 180 degrees Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 12 dB Subsonic Filter: Fixed at 20 Hz RCA Preamp Output: No Speaker-level (high-level) inputs Low Level Input sensitivity: 0.3 - 5 volts High Level Input sensitivity: 0.9 - 12 volts Fuse Rating: 20A x 1  Enclosure Features: 10" Sealed Enclosure Cast aluminum heatsink enclosure for durability Box Finish: Black Coated Tough Guard Absolute KIT4BL 4 Gauge Amplifier Wiring Kit Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.