Rockford Fosgate 10" Subwoofer (73)

4 Rockford Fosgate P2D2-10 10 Inch 600 Watt 2-Ohm Punch Series Car Audio Subwoofer P2D210 (4 Pack) Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features: 10" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 600 watts Power Handling: RMS: 300 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Rockford Fosgate P2 Series Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 29 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @40.0 Hz Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz Matching Amplifiers: (one driver) Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime R2S-1X10 400W Peak Prime Series (R2SD4) Single 10" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 10" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X10 is a 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 10" Loaded Sealed Box sealed truck-style enclosure with one 10" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 10" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 400 watts Power Handling RMS: 200 watts Recommended power range: 100 - 200 watts RMS frequency response: 38-250 Hz sensitivity: 83 dB Weight: 19.9 lbs Dimensions: 5-1/4"BD x 3-1/4"TD x 19-1/8"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X10 package: R2S-1X10 Owners Manual Sealed enclosure loaded with one 10" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions

Rockford Fosgate Prime R2S-1X10 400W Peak Prime Series (R2SD4) Single 10" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 10" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X10 is a 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 10" Loaded Sealed Box sealed truck-style enclosure with one 10" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 10" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 400 watts Power Handling RMS: 200 watts Recommended power range: 100 - 200 watts RMS frequency response: 38-250 Hz sensitivity: 83 dB Weight: 19.9 lbs Dimensions: 5-1/4"BD x 3-1/4"TD x 19-1/8"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X10 package: R2S-1X10 Owners Manual Sealed enclosure loaded with one 10" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P2D4-10 10 Dual 4 Ohm Punch Series Double Subwoofers + Absolute DSS10 Dual 10 Sealed Subwoofer Enclosure 2 Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 10" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 10" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P3SD2-10 P3SD210 10" 1200W Shallow Mount Car Subwoofers Subs Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate P3SD2-10 P3SD210 10" 1200W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers Subs + Absolute DSS10 Sub Enclosure Box Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

2 Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

 Rockford Fosgate Punch P3D4-12 1200W Max, 600W RMS 12" Punch P3 Series Dual 4-Ohm Car Subwoofer + Absolute VEGS12 Single 12” Vented MDF Subwoofer Enclosure + Absolute KIT4 4 Gauge Amp KIT The P3D4-12 is Rockford Fosgate's best-performing Punch series subwoofer for cars and trucks. The P3 12-inch subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a Flex Fit basket for extreme car and truck installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 12" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1200 watts per sub Power Handling: RMS: 600 watts per sub Impedance: 4 ohms Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly-cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multi-point high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun laced Nomex insulating reinforcement collar 102 oz Double stacked ferrite magnet structure Frequency response: 27.7-250 Hz Sensitivity: 85 dB Xmax: 16.2 mm Mounting Depth: 6-11/16" Cutout Diameter: 11-1/4" Authorized Internet Dealer What's in the P3D4-12 package: One 12" Dual 4-ohm voice coil subwoofer Trim ring Twelve 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual (English/ French/ Spanish/ German) Rockford Fosgate P3D4-12 owner's manual Absolute VEGS12 12" Single Vented Ported 1.66 Cubic Feet MDF Black Subwoofer Enclosure Single 12" Vented Ported MDF Subwoofer Enclosure Insulated fiberglass liner 3/4" High-quality MDF material Professionally Sealed, caulked, and carpeted Designed for round woofers Durable black carpeting Gold screw terminals Fits Mostly All Cars Subwoofer mounting depth: 10-1/2" Subwoofer cutout diameter: 11-5/8" Total box volume: 1.66 cubic feet Dimensions: 16"D x 18"W x 13-1/2"H Weight: 20.00 Ibs Absolute USA KIT-4 2000 Watts Complete Amplifier Hookup Kit Product Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + Absolute VEGS10 10" Vented Sub Box The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + 10" Mesh Grille The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.