Rockford Fosgate 10" Subwoofer (77)

  Rockford Fosgate Prime R2D2-10 500W Max 250W RMS 10" Dual 2-Ohm R2 Prime Series Subwoofer Rockford Fosgate Prime R2 10” subwoofers provide high-performance bass at an unbelievable value. This model features a laser-etched curvilinear dust cap to dissipate heat generated by the high‐temp copper voice coil and a solid stamped steel frame with integrated frame-mounted compression terminals. Best of all, they are optimized for both sealed and vented enclosures. Car Audio Fanatics who want Rockford Fosgate quality can rely on the Prime Series 10" subwoofers to get the job done and the Dual Voice Coil provides awesome installation flexibility. These drivers can pump out the bass due to their mica-injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keep the motor running cool! These R2 subwoofers are optimized for sealed and vented enclosures. General Features: 10" Dual 2-Ohm Prime Series Subwoofer 250 Watts RMS Power Handling 400 Watts Max Power Handling Recommended power range: 175 - 300 watts RMS CEA-2031 compliant Verified with Klippel speaker certification 12 AWG compression terminals Fiber-reinforced painted paper-pulp woofer cone High temperature 2" voice coil Laser-etched aluminum dust cap High-durability compressed foam surround Proprietary powder-coated stamped steel frame with spider cavity venting Fatigue-resistant poly-cotton spider with integral woven leads High-temperature copper voice coil with aluminum former 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica-injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated ABS decorative trim ring Mounting Depth: 4.319" Cutout Diameter: 9.125" Magnet Weight: 43oz Frequency Response: 45 - 250 Hz Xmax: 6.5mm Sensitivity: 87 dB @ 1 watt / 1 meter Optimized for sealed enclosures Recommended Sealed Enclosure: 0.50 - 0.85ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  2 Rockford Fosgate Prime R2D4-10 500W Max 250W RMS 10" Dual 4-Ohm R2 Prime Series Subwoofer Rockford Fosgate Prime R2 10” subwoofers provide high-performance bass at an unbelievable value. This model features a laser etched curvilinear dust-cap to dissipate heat generated by the high‐temp copper voice coil as well as a solid stamped steel frame with integrated frame-mounted compression terminals. Best of all, they are optimized for both sealed and vented enclosures. Car Audio Fanatics who want Rockford Fosgate quality can rely on the Prime Series 10" subwoofers to get the job done and the Dual Voice Coil provides awesome installation flexibility. These drivers can pump out the bass due to their mica injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keep the motor running cool! These R2 subwoofers are optimized for sealed and vented enclosures. General Features: 10" Dual 4-Ohm Prime Series Subwoofer 250 Watts RMS Power Handling 400 Watts Max Power Handling Recommended power range: 175 - 300 watts RMS CEA-2031 compliant Verified with Klippel speaker certification 12 AWG compression terminals Fiber-reinforced painted paper-pulp woofer cone High temperature 2" voice coil Laser-etched aluminum dust cap High durability compressed foam surround Proprietary powder coated stamped steel frame with spider cavity venting Fatigue resistant poly-cotton spider with integral woven leads High-temperature copper voice coil with aluminum former 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated ABS decorative trim ring Mounting Depth: 4.319" Cutout Diameter: 9.125" Magnet Weight: 43oz Frequency Response: 45 - 250 Hz Xmax: 6.5mm Sensitivity: 87 dB @ 1 watt / 1 meter Optimized for sealed enclosures Recommended Sealed Enclosure: 0.50 - 0.85ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + Rockford Fosgate RFK4X 4 AWG Complete Amplifier to Speaker Installation Kit The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + P2P3G10 10" Mesh Grille The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features: 10" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 600 watts Power Handling: RMS: 300 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Rockford Fosgate P2 Series Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 29 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @40.0 Hz Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz Matching Amplifiers: (one driver) Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate P3SD2-10 P3SD210 10" 1200W Shallow Mount Car Subwoofers Subs + Absolute DSS10 Sub Enclosure Box Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

(2) Rockford Fosgate R2SD4-10 10" 800 watt Prime R2 Dual 4 Ohm Voice Coil Shallow Subwoofers Stamped Solid-steel Frame - Mica-injected Polypropylene Woofer Cone with Poly-foam Surround When you have no space for bass, our R2 10" shallow subwoofer can help satisfy your need for low-frequency music. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth-mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures. General Features: 12 AWG compression terminals Anodized aluminum voice coil former Optimized for sealed enclosures Mica-injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated PVC trim ring Shallow Motor Assembly power range: 100-200 watts RMS (400 watts peak power) frequency response: 45-250 Hz sensitivity: 82 dB top-mount depth: 3-7/16" sealed box volume: 0.7 cubic feet ported box volume: 1.4 cubic feet 1 Year Warranty. What is in the R2SD4-10 package: Rockford Fosgate R2SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer Eight 1-1/8" Self-tapping screws Installation and Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate R2SD2-10 800W 2-ohm Shallow Mount Subwoofers Our Prime R2SD2-10 shallow subwoofer will satisfy your needs when you have no space for bass. This 10” subwoofer handles 200 Watts RMS, and the 2-ohm Dual Voice Coil design lets you wire them in various configurations. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica-injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth-mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures. General Features: 10" Dual 2-ohm Shallow Mount Prime Stage 2 Series Subwoofer Peak Power Handling: 400 watts MS Power Handling: 200 watts Recommended power range: 100 - 200 watts RMS Impedance: 2 ohm Mica-injected polypropylene cone Black raised surround Linear spider with 16 AWG woven tinsel leads StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Designed for use with sealed and vented enclosures High-temperature voice coil Integrated PVC trim ring Anodized aluminum voice coil former 10" shallow-mount subwoofer with dual 2-ohm voice coils mica-injected polypropylene woofer cone with poly-foam surround stamped solid-steel frame sealed box volume: 0.7 cubic feet ported box volume: 1.4 cubic feet Frequency response: 45-250 Hz Sensitivity: 82 dB Mounting depth: 3-7/16" Cutout diameter: 9-1/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: One shallow-mount 10" Dual 2-ohm voice coil woofer Eight 1-1/8" Self-tapping screws 4mm Allen bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate Prime R2SD4-10 R2 10-Inch 400 Watt Subwoofer - 4 Ohm Rockford Fosgate's Prime R2 shallow-mount subs deliver satisfying bass even in smaller cars where space is tight. A special elevated motor structure lets these low-profile subs work in extremely compact enclosures, while still handling plenty of power. The R2SD4-10 sub features a 10" mica-injected polypropylene cone that works with a high-density poly-foam surround to punch out fat, deep notes. This shallow-mount workhorse will handle up to 200 watts RMS, with a mounting depth of only 3-1/2". Rockford Fosgate stitches the tinsel leads that carry the signal to the voice coils directly into the cone, so they'll hang tough through heavy use. The stamped solid-steel frame offers the same venting found in standard-mount Rockford Fosgate subs to keep this sub running cool. Dual 4-ohm voice coils allow you to wire this sub for 2- or 8-ohm impedance, giving you more flexibility in setting up your system. Rockford Fosgate optimizes this Prime sub for both sealed and ported enclosures so you can choose the type of bass you want in your ride. Features Shallow Mount Design: The Rockford Fosgate Prime R2 Shallow Subwoofer is designed and engineered with a much smaller motor assembly which reduces the overall depth of the woofer allowing it to fit in shallower enclosures and tighter locations of your vehicle. Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils to offer wiring flexibility. When the voice coils are wired in parallel the woofer presents a 2-ohm load, when wired in series it presents an 8-ohm load. Spring Post Assembly: The woofer features compression input terminals with attached 16-gauge stitched tinsel lead wires. The nickel-plated spring posts will accept pin connectors, single banana plugs, and bare wire up to 12 gauge. Sealed Box Volume: Rockford Fosgate recommends a sealed enclosure with an optimum internal volume of 0.7 cubic feet (from 0.5 to 0.75 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music. Vented Box Volume: Rockford Fosgate recommends a vented enclosure with an internal volume of 1.4 cubic feet using a 4" diameter x 13.7" long port tube; this yields a tuning frequency of 42 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low-frequency output (below 35 Hz). Product highlights: 10" shallow-mount subwoofer with dual 4-ohm voice coils mica-injected polypropylene woofer cone with poly-foam surround stamped solid-steel frame power range: 100-200 watts RMS (400 watts peak power) frequency response: 45-250 Hz sensitivity: 82 dB top-mount depth: 3-7/16" sealed box volume: 0.7 cubic feet ported box volume: 1.4 cubic feet warranty: 1 year One shallow-mount 10" Dual 4-ohm voice coil woofer Eight 1-1/8" Self-tapping screws 4mm Allen bit Installation and Operation manual  ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate T1S1-10 Power Series 10" T1 Slim Single 1-Ohm Subwoofer (500W RMS) For decades, subwoofer makers have strived to have the biggest and most powerful subs. But in a market dominated by smaller cars and trucks, the focus has shifted to building high-performance subs that are small enough to fit in today's vehicles. Rockford Fosgate understands the need for great bass, and their Power Series T1 slim subwoofers deliver jaw-dropping performance without taking up a lot of space. Big bass, small space Big sound, small package The Power Series T1S1-10 subwoofer uses a neodymium motor structure with high-strength magnets to help minimize mounting depth. Rockford Fosgate developed new construction technologies to fit a 3-inch voice coil in a 10" sub with a mounting depth of only 3", then used their Vertical Attach Surround Technique (VAST) to increase cone area for fatter bass. It all adds up to power handling of up to 500 watts RMS in a shockingly small package. This sub's 1-ohm impedance makes it a great candidate for multiple sub setups or for getting max power from high-performance mono amps. You'll love the big bass sound these subwoofers deliver, and you'll appreciate the slim design when you're looking for a place for bass in your vehicle. General Features: Power Series 10" T1 Slim Single 1-Ohm Subwoofer Power Handling: RMS: 500 Watts Peak: 1000 Watts Nominal Impedance: 1 Ohm Carbon fiber/PMI/glass fiber cone with aluminum dust cap Injection-molded foam surround with VAST™ Dual Nomex progressive spiders with integrated lead wires Aluminum diecast frame with integrated heat sink fins Custom insulated push spring 10 AWG terminals Dual wound 2.5" voice coil with interior/exterior windings Encapsulating voice coil to former coupling technology (patent pending) Detachable die-cast aluminum trim ring Vented pole piece High temp high energy neodymium motor structure Proprietary split yoke pass-thru motor technology (patent pending) Integrated copper cap heat sinking shorting ring (IDHS) Optional grille insert available Optimized for sealed enclosures Voice Coil Type: Single Voice Coil Voice Coil Diameter: 2.28" (100 mm) Frequency Response: 32 - 250 Hz Xmax: 14.2mm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov