Sold out -51% sale
MR DJ TE-512 5
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA MR DJ TE-512 5"x12" 300 Watts Pro Audio PA/DJ Wide Dispersion Screw-On Type Piezo Speaker Horn Tweeter
$39.99 $79.99
MR DJ TE-512 5"x12" 300 Watts Pro Audio PA/DJ Wide Dispersion Screw-On Type Piezo Speaker Horn Tweeter Finally, an affordable medium-sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..., 5"x12" Piezo Horn Tweeter Excellent Transient Response, Low Distortion, Replacement tweeter, These are GREAT for DIY projects that are a  bit better than entry-level components. Great for automotive. monitors and medium-size PA WORKS FOR JBL, Peavey, Cerwin Vega, EV, Electra Voice, Yamaha, Pyle-Pro, and MR DJ General Features: 5X12 COMPRESSION DRIVER HORN TWEETER Impedance:   4-8 ohm Frequency Range:   1.5k - 20khz RMS Power:  50 watts Max Power:  100 watts   Peak Power:   300 watts Sensitivity:    108 dB Titanium Diaphragm 1" Throat Ferrofluid Cooled 22 Ounce Magnet Extreme High-Frequency Response: 3.5-30kHz Tweeters with Driver PA/DJ Speakers - Replacement 5"x12" Piezo Horn Tweeter Excellent Transient Response Low Distortion  HOME CABINET HORN REPLACEMENT Material: ABS Resin Front of Lens Measurement: 5.25" x 12.43" Front of Lens to Back of Magnet Measurement: 8.81" ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Sold out -51% sale
2 MR DJ TE-512 5
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA 2 MR DJ TE-512 5"x12" 300 Watts Pro Audio PA/DJ Wide Dispersion Screw-On Type Piezo Speaker Horn Tweeter
$69.99 $139.99
2 MR DJ TE-512 5"x12" 300 Watts Pro Audio PA/DJ Wide Dispersion Screw-On Type Piezo Speaker Horn Tweeter Finally, an affordable medium-sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..., 5"x12" Piezo Horn Tweeter Excellent Transient Response, Low Distortion, Replacement tweeter, These are GREAT for DIY projects that are a bit better than entry-level components. Great for automotive. monitors and medium-size PA WORKS FOR JBL, Peavey, Cerwin Vega, EV, Electra Voice, Yamaha, Pyle-Pro, and MR DJ General Features: 5X12 COMPRESSION DRIVER HORN TWEETER Impedance: 4-8 ohm Frequency Range: 1.5k - 20khz RMS Power: 50 watts Max Power: 100 watts Peak Power: 300 watts Sensitivity: 108 dB Titanium Diaphragm 1" Throat Ferrofluid Cooled 22 Ounce Magnet Extreme High-Frequency Response: 3.5-30kHz Tweeters with Driver PA/DJ Speakers - Replacement 5"x12" Piezo Horn Tweeter Excellent Transient Response Low Distortion HOME CABINET HORN REPLACEMENT Material: ABS Resin Front of Lens Measurement: 5.25" x 12.43" Front of Lens to Back of Magnet Measurement: 8.81" ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Sold out -51% sale
MR DJ TE-512 5
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA MR DJ TE-512 5"x12" 300 Watts Pro Audio PA/DJ Wide Dispersion Screw-On Type Piezo Speaker Horn Tweeter
$39.99 $79.99
MR DJ TE-512 5"x12" 300 Watts Pro Audio PA/DJ Wide Dispersion Screw-On Type Piezo Speaker Horn Tweeter Finally, an affordable medium-sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..., 5"x12" Piezo Horn Tweeter Excellent Transient Response, Low Distortion, Replacement tweeter, These are GREAT for DIY projects that are a bit better than entry-level components. Great for automotive. monitors and medium-size PA WORKS FOR JBL, Peavey, Cerwin Vega, EV, Electra Voice, Yamaha, Pyle-Pro, and MR DJ General Features: 5X12 COMPRESSION DRIVER HORN TWEETER Impedance: 4-8 ohm Frequency Range: 1.5k - 20khz RMS Power: 50 watts Max Power: 100 watts Peak Power: 300 watts Sensitivity: 108 dB Titanium Diaphragm 1" Throat Ferrofluid Cooled 22 Ounce Magnet Extreme High-Frequency Response: 3.5-30kHz Tweeters with Driver PA/DJ Speakers - Replacement 5"x12" Piezo Horn Tweeter Excellent Transient Response Low Distortion HOME CABINET HORN REPLACEMENT Material: ABS Resin Front of Lens Measurement: 5.25" x 12.43" Front of Lens to Back of Magnet Measurement: 8.81" ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
-69% sale
Mr. Dj HDT700S 3.5-Inch Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet Chrom Mr. Dj HDT700S 3.5-Inch Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet Chrom
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA Mr. Dj HDT700S 3.5-Inch Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet Chrom
$24.99 $79.99
Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Chrom) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-69% sale
2 Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition 2 Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA 2 Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition
$49.99 $159.99
2 Mr. Dj HDT700S 3.5-inch Titanium Bullet High Compression Tweeter with 10 10-ounce ferrite Magnet (Chrom) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-69% sale
Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition
$24.99 $79.99
Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Chrom) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-69% sale
2 Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition 2 Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA 2 Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition
$49.99 $159.99
2 Mr. Dj HDT700B 3.5-inch Titanium Bullet High Compression Tweeter with 10 10-ounce ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-69% sale
MR DJ HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) MR DJ HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black)
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA MR DJ HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black)
$24.99 $79.99
Mr. Dj HDT700B 3.5-inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-56% sale
Mr Dj HD-500 Horn Compression Driver Professional Grade 500 Watts 1
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA Mr Dj HD-500 Horn Compression Driver Professional Grade 500 Watts 1" High-Frequency Compressor Dj PA Horn Driver Tweeter
$44.99 $99.99
Mr Dj HD-500 Professional Grade 500 WATTS 1" High-Frequency Compressor Dj Horn Driver Tweeter The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm, which has unique properties of stiffness and damping. By fluid cooling, the voice coil, increased power handling, and controlled low-frequency behavior are assured. Mr DJ HD-500 500 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands General Features: Replacement High-Quality Compression Horn Driver High-Efficiency Ceramic Tweeter Frequency response: 1500Hz -22000Hz Fits horns with 1 ⅜” X 18 TPI threads For use with 4~16 Ohm applications Max Power Handling: 500W Size 4" Round x 1 1/2 Deep" Threaded Mounting Shaft High Impact ABS Black Housing Midrange/tweeter compression horn driver Titanium diaphragm Terminals 205 Type Sensitivity 100 dB Fits Horns with 1-3/8" x 18 TPI Threads Frequency Range:1500Hz-20kHz Type: 25mm Titanium Compression Tweeter Driver 2501: Nominal impedance: 8ohm(AC) power capacity:20W sensitivity:105db/m.w diaphragm material: Titanium voice coil: Kapton25.4-CCAW magnet:11oz Horn Coupling:1 3/8” 18TPI Power Handling: 500 Watt Each Voice Coil Diameter: 25mm Weight: 1.5Lbs Each Diaphragm: Titanium Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-51% sale
Peavey 14XT 1.4
00
DAYS
00
HRS
00
MIN
00
SEC
Peavey Peavey 14XT 1.4" Titanium 8-Ohm 100 Watt Peak / 50 Watts RMS High-Frequency Compression Driver
$89.99 $179.99
1 Peavey 14XT 1.4" Titanium 8-Ohm 100 Watt Peak / 50 Watts RMS High-Frequency Compression Driver General Features 1.4" Compression Driver Throat Parameter: 1" / 25 mm Nominal Impedance: 8 Ohms Minimum Impedance: 7.1 Ohms DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 100 W peak 50 W program 25 W continuous Sensitivity: 102 dB SPL 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 1 kHz to 18,000 Hz Recommended Crossover: 1,800 Hz at 12 dB / Octave Lowest Recommended Crossover: 1,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voice Coil Diameter: 1.4" / 35.5 mm Voice Coil Material: Edge-wound ribbon with high temp Kapton bobbin Flux Density: 11,500 gauss (1.15T) Dimensions: 3.500" (91.44 mm) diameter x 2.75" (69.85 mm) depth Horn Coupling Diameter: 1.0" (25.4 mm) Horn Coupling Threads: Standard 1 3/8" - 18" Net Weight: 33.3 oz. Shipping Weight: 37 oz. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
-47% sale
MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn
$149.99 $279.99
MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn MR DJ PRO-D1 Pro Audio Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. MR DJ PRO Titanium Compression Drivers with Aluminum Horns are the top-of-the-line high-frequency driver/tweeter/horns in the market. Capable of emitting extremely loud high-frequency sound, this high compression driver will turn heads and demand attention. Guaranteed to elevate any pro audio build to the next level. General Features: Pro Audio Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. Impressive 110 dB sensitivity with PRO Audio long Horn Designed for maximum sound reproduction Peak Power Handling 1000 Watts Program Power Handling 600 Watts AES Rated Power 400 Watts Diaphragm Titanium Material, Horn Titanium Material, Mr. Dj PRO-D1 1000 Watts Titanium Compression Driver RMS Power 600 Watts, Voice Coil 2.03", Impedance 8 Ohm, Diaphragm Titanium Material, Horn Titanium Material, Throat Diameter 2", 35 Oz Magnet, Frequency Response 900Hz - 17.2KHz, Newly redesigned backplate for an amazing look. High wattage driver requiring 220w AES power and 600w max for ear-blasting high range frequencies. 900Hz-17.2KHz Frequency Response Mylar Capacitor Crossover 2 inch Driver Horn 108dB Sensitivity 8-Ohms Impedance Baffle Cut Out: 5.39" Overall Diameter: 6.18" Mounting Depth: 7.67" Weight: 6 Lbs ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
-69% sale
Mr. Dj HDT700B 3.5-in Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet (Black) Mr. Dj HDT700B 3.5-in Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet (Black)
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA Mr. Dj HDT700B 3.5-in Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet (Black)
$24.99 $79.99
Mr. Dj HDT700B 3.5-inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-51% sale
MR DJ TE-030<br/> 12
00
DAYS
00
HRS
00
MIN
00
SEC
MR DJ USA MR DJ TE-030
12" 300 Watts Piezo Compression Horn Tweeters Driver
$49.99 $99.99
MR DJ TE-030 12" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for PA DJ Cabinet, or If You are Building Your Own PA DJ Speakers. A Very Efficient and Powerful Compression Tweeter. General Features: 12" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

NATIONWIDE DELIVERY

At Absolute Pro Music, we are glad to ship to most countries! Check our list.

SECURE SHOPPING

We takes credit card information security seriously, we have implemented a variety of technical and procedural controls to ensure transactions on our site remain private and protected.

SHOP WITH CONFIDENCE

Absolute Pro Music wants to make sure that you are completely satisfied. If for some reason you aren't happy with product(s) and want to return it, we make returns simple.

HELP CENTER

You can simply give us a call at +1 800.674.27.24 , and our support staff will answer your call immediately! Explain your issue, what you'd like to change, or what you'd like to add onto your phone system, and get help in real time.
Absolute Pro Music
American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa