Pro Full Range Speaker Drivers (31)

MR DJ TE-180 4"x10" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for PA DJ Cabinet, or If You are Building Your Own PA DJ Speakers. A Very Efficient and Powerful Compression Tweeter. General Features: 4"x10" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz

2 MR DJ TE-515 5" X 15" 300W Pro Audio PA/DJ Wide Screw-On Type Piezo Horn TweeterFinally, an affordable medium-sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..., 5"x15" Piezo Horn Tweeter Excellent Transient Response, Low Distortion, Replacement tweeter, These are GREAT for DIY projects that are a bit better than entry-level components. Great for automotive. monitors and medium-size PA WORKS FOR JBL, Peavey, Cerwin Vega, EV, Electra Voice, Yamaha, Pyle-Pro, and MR DJGeneral Features: 5"X15" Compression Driver Horn Tweeter Impedance: 8 Ohm Frequency Range: 1.5k - 20khz RMS Power: 50 Watts Max Power: 100 Watts Peak Power: 300 Watts Sensitivity: 108 Db Titanium Diaphragm 1" Throat Ferrofluid Cooled 22 Ounce Magnet Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver Pa/Dj Speakers – Replacement Home Cabinet Horn Replacement Material: ABS Resin Front of Lens to Back of Magnet Measurement: 8.81" Item Weight:1.95 Pounds Item Dimensions: 15x5x7 Inches ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Yorkville Sound C15W, Coliseum Series 500W 2-Way Installation Speaker 15 Inch - White Coliseum 15" Installation Loudspeakers Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. The C15W is the most powerful loudspeaker in the Coliseum series. With 500 watts of power handling, a 15” woofer, rotatable horn, and OmniMount-compatible rigging points, the C15W is ideal for large commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C15W and C12W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference   Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 500 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 99 Max SPL (dB): 126 Frequency Response (Hz +/- 3dB): 50 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 15 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 0 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear mounted rigging points for Omnimount 120.0WA bracket Dimensions (DWH xbackW, inches): 15.4 x 20.9 x 28.7 x 15.7 Dimensions (DWH xbackW, cm): 39.1 x 53.1 x 72.9 x 39.8 Weight (lbs/kg): 75 / 34.2 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX55P-2, 2-Way Powered Loudspeaker (12 Inch) NX 12” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker or stage monitor. Featuring a 12” woofer and 2000 watts of peak power (1000 watts program), the NX55P-2 is the most powerful speaker in the NX series. The rear panel features a master level control, a selectable LF roll off for use with a subwoofer or as a vocal monitor, and a switchable onboard mixer section. When enabled, this provides an XLR microphone input and 1/4" line inputs with level controls and 2-band EQ. Link inputs and outputs provide balanced connectivity to other cabinets. Up to three onboard mixers can be active in a linked system, providing up to three mic and six line inputs without requiring an external mixer. The NX55P-2's inputs and controls are well-protected, so it can be used in any orientation. It was carefully designed for low operating temperatures and reduced heat production to be placed close to walls, floors, and other speakers. General Features: 2000 W Peak Power (1000 W Program) 12” LF Driver with 3” Voice Coil 1.4” HF Driver 1x XLR Mic Input, 2x 1/4" Line Inputs, 1x XLR and 1x 1/4” Link Inputs 1x XLR and 1x 1/4" Link Outputs Integrated Mixer with 2-Band EQ Switchable LF Rolloff for Use with Subwoofers Integrated Flying Hardware Made in Canada System Type: Powered Loudspeaker Power Rating: 2000 W Peak (1000 W Program) Biampable: Self-Powered Biamp Operation Only: Yes Sensitivity (dB AT 1Watt/1m): 100 dB Max SPL: 134 dB Peak (128 dB Continuous) Frequency Response (Hz +/- 3dB): 45 Hz - 18 kHz Crossover Frequency: 2 kHz HF Driver(s): 1.4” Aluminum Diaphragm, 1” Exit HF Dispersion (°H x °V): 80° x 50° HF Protection: Thermal / Peak Limiter LF Driver(s): 12” with 3” Voice Coil LF Protection: Thermal / Overcurrent HF Amplifier Type: 2-Tier Class H LF Amplifier Type: Class D Power Consumption (typ/max): 120 / 310 VA Inputs: 1x XLR (Mic) 2x 1/4" (Line / CD) 1x XLR 1x 1/4" Link Inputs Input Sensitivity (Vrms Sine): 1.23 Vrms Sine, +4dBv Controls: Master Level, LF Rolloff (60 Hz / 100 Hz) Mixer On / Off Mic Level Line / CD Level Treble Bass Mixer Controls: Line Level Mic Level Bass Treble Limiter: Yes LED Indicators: Power, Clip, Limit Bar Handles: 1 (Side) Flypoints : 4 (2x Top, 2x Bottom), 1x Pullback Flying Hardware: 1/4-20 Optional Flying Hardware: NXF Flyware Pole Mount Adapter (1 3/8  1 (Bottom) Enclosure Materials: Molded Polypropylene Dimensions (DWH) : 12.25" x 16" x 26.5" (31.1 cm x 40.6 cm x 67.3 cm) Weight: 41 lbs / 18.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn MR DJ PRO-D1 Pro Audio Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. MR DJ PRO Titanium Compression Drivers with Aluminum Horns are the top-of-the-line high-frequency driver/tweeter/horns in the market. Capable of emitting extremely loud high-frequency sound, this high compression driver will turn heads and demand attention. Guaranteed to elevate any pro audio build to the next level. General Features: Pro Audio Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. Impressive 110 dB sensitivity with PRO Audio long Horn Designed for maximum sound reproduction Peak Power Handling 1000 Watts Program Power Handling 600 Watts AES Rated Power 400 Watts Diaphragm Titanium Material, Horn Titanium Material, Mr. Dj PRO-D1 1000 Watts Titanium Compression Driver RMS Power 600 Watts, Voice Coil 2.03", Impedance 8 Ohm, Diaphragm Titanium Material, Horn Titanium Material, Throat Diameter 2", 35 Oz Magnet, Frequency Response 900Hz - 17.2KHz, Newly redesigned backplate for an amazing look. High wattage driver requiring 220w AES power and 600w max for ear-blasting high range frequencies. 900Hz-17.2KHz Frequency Response Mylar Capacitor Crossover 2 inch Driver Horn 108dB Sensitivity 8-Ohms Impedance Baffle Cut Out: 5.39" Overall Diameter: 6.18" Mounting Depth: 7.67" Weight: 6 Lbs. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn MR DJ PRO-D1 Pro Audio Compression Driver for mid-high vocal reproduction offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. MR DJ PRO Titanium Compression Drivers with Aluminum Horns are the top-of-the-line high-frequency drivers/tweeter/horns in the market. Capable of emitting deafening high-frequency sound, this high-compression driver will turn heads and demand attention. It is guaranteed to elevate any pro audio build to the next level. General Features: Pro Audio Compression Driver for mid-high vocal reproduction, with high sensitivity and a pleasant sound from the titanium diaphragm. The driver's small diameter allows front mounting, making it easy to install without detaching the driver from the horn. Impressive 110 dB sensitivity with PRO Audio long Horn Designed for maximum sound reproduction Peak Power Handling 1000 Watts Program Power Handling 600 Watts AES Rated Power 400 Watts Diaphragm Titanium Material, Horn Titanium Material, Mr. Dj PRO-D1 1000 Watts Titanium Compression Driver RMS Power 600 Watts, Voice Coil 2.03", Impedance 8 Ohm, Diaphragm Titanium Material, Horn Titanium Material, Throat Diameter 2", 35 Oz Magnet, Frequency Response 900Hz - 17.2KHz, Newly redesigned backplate for an amazing look. High wattage driver requiring 220w AES power and 600w max for ear-blasting high-range frequencies. 900Hz-17.2KHz Frequency Response Mylar Capacitor Crossover 2-inch Driver Horn 108dB Sensitivity 8-Ohms Impedance Baffle Cut Out: 5.39" Overall Diameter: 6.18" Mounting Depth: 7.67" Weight: 6 Lbs. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mr Dj HD-500 Professional Grade 500 WATTS 1" High-Frequency Compressor Dj Horn Driver Tweeter The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm, which has unique properties of stiffness and damping. By fluid cooling, the voice coil, increased power handling, and controlled low-frequency behavior are assured. Mr DJ HD-500 500 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands General Features: Replacement High-Quality Compression Horn Driver High-Efficiency Ceramic Tweeter Frequency response: 1500Hz -22000Hz Fits horns with 1 ⅜” X 18 TPI threads For use with 4~16 Ohm applications Max Power Handling: 500W Size 4" Round x 1 1/2 Deep" Threaded Mounting Shaft High Impact ABS Black Housing Midrange/tweeter compression horn driver Titanium diaphragm Terminals 205 Type Sensitivity 100 dB Fits Horns with 1-3/8" x 18 TPI Threads Frequency Range:1500Hz-20kHz Type: 25mm Titanium Compression Tweeter Driver 2501: Nominal impedance: 8ohm(AC) power capacity:20W sensitivity:105db/m.w diaphragm material: Titanium voice coil: Kapton25.4-CCAW magnet:11oz Horn Coupling:1 3/8” 18TPI Power Handling: 500 Watt Each Voice Coil Diameter: 25mm Weight: 1.5Lbs Each Diaphragm: Titanium Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream SPD.400 Compression Pro Driver Tweeter Horn Large Aluminum Horn 4Ohm General Feature: Max Power 400 Watts RMS Power 200 Watts Voice Coil & Diaphragm 3″ Titanium Impedance 4-Ohm Frequency Response 500Hz-25kHz Efficiency (1w/1m) 110dB Mounting Depth 7.50″ Authorized Internet Dealer ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Peavey RX22N High-Frequency Compression Horn Driver RX22HF RX22This is a direct replacement from Peavey. Let us know if you want more pictures or information about this item. We deal directly with Peavey, so let us know if you need more parts for your Peavey equipment. We carry Crossovers, full speakers, and all accessories!General Features: 2" edge wound voice coil with ferrofluid cooling improves power handling Screw on 1-3/8" 18 TPI mount is compatible with most popular horns Throat Parameter: .875" / 22 mm Nominal Impedance: 8 Ohms Minimum Impedance: 5.1 Ohms DC Resistance: 4.7 Ohms Power Capacity 1000 Hz to 20,000 Hz: 280 W peak 140 W program 70 W continuous using pink noise band-limited from 1000 Hz to 20 kHz(AES 2-1984) Power Capacity 500 Hz to 20,000 Hz: 240 W peak 120 W program 60 W continuous using pink noise band-limited from 500 Hz to 20 kHz Sensitivity: 111 dB / 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 500 Hz to 20,000 Hz Recommended Crossover: 1200 Hz at 12 dB / Octave Lowest Recommended Crossover: 500 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voice Coil Diameter: 2.0" / 50.8 mm Voice Coil Material: Edge-wound copper-clad aluminum ribbon with a temp composite bobbin Flux Density: 17,500 gausses (1.75T) Dimensions: 5.250" (133.3 mm) diameter x 3.05" (77.4 mm) depth Horn Coupling Diameter: 7/8: (22.2 mm) Horn Coupling Threads: Standard 1 3/8" / 18" Net Weight: 5 lbs. 6 oz. Shipping Weight: 6 lbs. 5.5 oz. Voice Coil Cooling: Ferrofluid Weight Unpacked: 5.50 lb(2.493 kg) Weight Packed: 6.48 lb(2.938 kg) Width Packed: 8.25"(20.955 cm) Height Packed: 8.25"(20.955 cm) Depth Packed: 4.75"(12.065 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey RX22N High-Frequency Compression Horn Driver RX22HF RX22This is a direct replacement from Peavey themselves. Let us know if you want more pictures or information about this item. We deal directly with peavey, so let us know if you need more parts for your Peavey equipment. We carry Crossovers, full speakers, and all accessories!General Features: 2" edge wound voice coil with ferrofluid cooling improves power handling Screw on 1-3/8" 18 TPI mount is compatible with most popular horns Throat Parameter: .875" / 22 mm Nominal Impedance: 8 Ohms Minimum Impedance: 5.1 Ohms DC Resistance: 4.7 Ohms Power Capacity 1000 Hz to 20,000 Hz: 280 W peak 140 W program 70 W continuous using pink noise band-limited from 1000 Hz to 20 kHz(AES 2-1984) Power Capacity 500 Hz to 20,000 Hz: 240 W peak 120 W program 60 W continuous using pink noise band-limited from 500 Hz to 20 kHz Sensitivity: 111 dB / 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 500 Hz to 20,000 Hz Recommended Crossover: 1200 Hz at 12 dB / Octave Lowest Recommended Crossover: 500 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voice Coil Diameter: 2.0" / 50.8 mm Voice Coil Material: Edge-wound copper-clad aluminum ribbon with a high temp composite bobbin Flux Density: 17,500 gausses (1.75T) Dimensions: 5.250" (133.3 mm) diameter x 3.05" (77.4 mm) depth Horn Coupling Diameter: 7/8: (22.2 mm) Horn Coupling Threads: Standard 1 3/8" / 18" Net Weight: 5 lbs. 6 oz. Shipping Weight: 6 lbs. 5.5 oz. Voice Coil Cooling: Ferrofluid Weight Unpacked: 5.50 lb(2.493 kg) Weight Packed: 6.48 lb(2.938 kg) Width Packed: 8.25"(20.955 cm) Height Packed: 8.25"(20.955 cm) Depth Packed: 4.75"(12.065 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ TE-030 12" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter: Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for a PA DJ Cabinet or if you are Building Your Own PA DJ Speakers. It is a very efficient and Powerful Compression Tweeter. General Features: 12" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.