Pro Audio DJ Speakers & Subwoofers (218)

Peavey PV 12M Pro Audio DJ Passive 12" Stage Monitor 1000W Speaker with MR DJ SS350 Speaker Stand & MR DJ 1/4" TO 1/4" 12' Cable Make your vocals cut through! Rated at 500 watts for program power and 1,000 watts for peak power handling capability, the rugged, trapezoidal PV 12M is built to withstand the rigors of the road. The PV 12M can be angled at 30 or 45 degrees from the floor and is pole-mounted. This two-way system features a 12" Sheffield® Pro 1200+™ premium woofer and a 14XT™ 1.4-inch titanium-diaphragm compression driver (no piezos) coupled to a constant-directivity horn with our exclusive Sound Guard™ IV high-frequency driver protection. Two 1/4-inch, full-range parallel inputs enable easy daisy-chaining. Top-quality performance from a very affordable, low-profile stage monitor! General Features: Two-way floor monitor 500 W program power handling 68 Hz to 17 kHz 12" Sheffield Pro 1200+ woofer w/ 2.5" voice coil 14XT compression driver w/ titanium diaphragm, 1" exit 90 x 40 CD horn Sound Guard IV tweeter protection carpet covering steel handle Heavy-duty metal grille die-cast aluminum pole mount Weight Unpacked: 37.50 lb(17.01 kg) Weight Packed: 44.00 lb(19.958 kg) Width Packed: 14.5"(36.83 cm) Height Packed: 24"(60.96 cm) Depth Packed: 19.25"(48.895 cm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PV 12M Pro Audio DJ Passive 12" Stage Monitor 1000W Speaker with MR DJ MEGA318 Wash Light Make your vocals cut through! Rated at a 500-watt program and 1,000-watt peak power handling capability, the rugged, trapezoidal PV 12M is built to withstand the rigors of the road. The PV 12M can be angled at 30 or 45 degrees from the floor and be pole mounted. This two-way system features a 12" Sheffield® Pro 1200+™ premium woofer and a 14XT™ 1.4-inch titanium-diaphragm compression driver (no piezos) coupled to a constant-directivity horn with our exclusive Sound Guard™ IV high-frequency driver protection. Two 1/4-inch, full-range parallel inputs allow easy daisy chaining. Top-quality performance from a very affordable, low-profile stage monitor! General Features: Two-way floor monitor 500 W program power handling 68 Hz to 17 kHz 12" Sheffield Pro 1200+ woofer w/ 2.5" voice coil 14XT compression driver w/ titanium diaphragm, 1" exit 90 x 40 CD horn Sound Guard IV tweeter protection carpet covering steel handle Heavy-duty metal grille die-cast aluminum pole mount Weight Unpacked: 37.50 lb(17.01 kg) Weight Packed: 44.00 lb(19.958 kg) Width Packed: 14.5"(36.83 cm) Height Packed: 24"(60.96 cm) Depth Packed: 19.25"(48.895 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Peavey PV 12M Pro Audio DJ Passive 12" Stage Monitor 1000W Speaker Make your vocals cut through! Rated at a 500-watt program and 1,000-watt peak power handling capability, the rugged, trapezoidal PV 12M is built to withstand the rigors of the road. The PV 12M can be angled at 30 or 45 degrees from the floor and be pole mounted. This two-way system features a 12" Sheffield® Pro 1200+™ premium woofer and a 14XT™ 1.4-inch titanium-diaphragm compression driver (no piezos) coupled to a constant-directivity horn with our exclusive Sound Guard™ IV high-frequency driver protection. Two 1/4-inch, full-range parallel inputs allow easy daisy chaining. Top-quality performance from a very affordable, low-profile stage monitor! General Features: Two-way floor monitor 500 W program power handling 68 Hz to 17 kHz 12" Sheffield Pro 1200+ woofer w/ 2.5" voice coil 14XT compression driver w/ titanium diaphragm, 1" exit 90 x 40 CD horn Sound Guard IV tweeter protection carpet covering steel handle Heavy-duty metal grille die-cast aluminum pole mount Weight Unpacked: 37.50 lb(17.01 kg) Weight Packed: 44.00 lb(19.958 kg) Width Packed: 14.5"(36.83 cm) Height Packed: 24"(60.96 cm) Depth Packed: 19.25"(48.895 cm) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie SRM450v3 1000W 12-inch Powered Speaker Mackie's gone the extra mile for you with the SRM450v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM450v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM450v3 active speaker to your rig! General Features: 1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup, no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to an MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 42 Hz - 23 kHz Frequency Response (-3 dB): 47 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 26.1 in / 663 mm Width: 16.0 in / 406 mm Depth: 14.8 in / 376 mm It weighs in at only 37 pounds  / 16.8 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie SRM450v3 1000W 12-inch Powered Speaker Mackie's gone the extra mile for you with the SRM450v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing to match. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM450v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM450v3 active speaker to your rig! General Features: 1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to easily handle your mics or instruments Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 42 Hz - 23 kHz Frequency Response (-3 dB): 47 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 26.1 in / 663 mm Width: 16.0 in / 406 mm Depth: 14.8 in / 376 mm It weighs in at only 37 pounds  / 16.8 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie SRM450v3 1000W 12-inch Powered Speaker Mackie's gone the extra mile for you with the SRM450v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM450v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM450v3 active speaker to your rig! General Features: 1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 42 Hz - 23 kHz Frequency Response (-3 dB): 47 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 26.1 in / 663 mm Width: 16.0 in / 406 mm Depth: 14.8 in / 376 mm It weighs in at only 37 pounds  / 16.8 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Mackie SRM350v3 1000W 10-inch Powered Speaker Mackie's gone the extra mile for you with the SRM350v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM350v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM350v3 active speaker to your rig! General Features: 1000W system power with 10" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 50 Hz - 23 kHz Frequency Response (-3 dB): 55 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 20.8 in / 527 mm Width: 13.1 in / 333 mm Depth: 12.3 in / 311 mm It weighs in at only 23 pounds / 10.4 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Mackie SRM350v3 1000W 10-inch Powered Speaker Mackie's gone the extra mile for you with the SRM350v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM350v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM350v3 active speaker to your rig! General Features: 1000W system power with 10" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 50 Hz - 23 kHz Frequency Response (-3 dB): 55 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 20.8 in / 527 mm Width: 13.1 in / 333 mm Depth: 12.3 in / 311 mm It weighs in at only 23 pounds / 10.4 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Mackie SRM350v3 1000W 10-inch Powered Speaker Mackie's gone the extra mile for you with the SRM350v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM350v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some of the work; add a Mackie SRM350v3 active speaker to your rig! General Features: 1000W system power with 10" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 50 Hz - 23 kHz Frequency Response (-3 dB): 55 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 20.8 in / 527 mm Width: 13.1 in / 333 mm Depth: 12.3 in / 311 mm It weighs in at only 23 pounds / 10.4 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Peavey Aquarius AQ 12 670W 12" Powered Speaker The Peavey Aquarius AQ series speaker enclosures represent the best combination of reliability, performance, and value in today's market. Using our 50-plus years of experience and custom components, the AQ series represents an evolution of speaker technology no other company can offer. Compared to previous designs, the AQ represents increased power, both in output and reliability. It also increases efficiency, using less power to create more output, making our products environmentally friendly. Sonically, our components are world-class. Our Asymmetrical Quadratic Waveguide horn allows us to direct the existing energy more precisely. This makes our enclosures perform better by getting more output where needed and having a cleaner, more precise sound than our competition. Safety is a number one concern; our enclosures are tested and certified for sale worldwide to be safe and reliable in several environments. Modern features like Bluetooth audio streaming and pairing another speaker make our speakers convenient and sonically superior. Advanced DSP allowed our engineers to design several presets that quickly modify the enclosure's dynamics and EQ for various applications. Efficient, easy to use, modern, reliable, and now with reduced weight, the AQ series is the best value in the business. Dare to compare our enclosures to any in its category, and you will find a sonically superior, more reliable, and higher output enclosure. General Products: Powered: Yes Power Configuration: Bi-amped Channels: Single-channel mixer LF Driver Size: 12" woofer HF Driver Size: 1.4" Titanium Compression driver LF Driver Power Amp: 670W Peak HF Driver Power Amp: 330W Peak Total Power: 1000W Peak Inputs: 1 x XLR-1/4" combo Outputs: 1 x XLR Bluetooth: Yes Wireless: Bluetooth Frequency Response: 62Hz-19khz (+/-6dB) Crossover Frequency: 24 dB/octave @ 1.95kHz Maximum Peak SPL: 126dB SPL Horizontal Coverage Angle: 110° Vertical Coverage Angle: 80° Signal Processing: DSP Presets Enclosure Material: Plastic Injection-Mold Mounting Options: Pole, Floor Power Source: Standard IEC AC cable Dimensions: 14"D x 14.38"W x 25.3"H Weight: 34 Pounds Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.