Pro Audio DJ Speakers & Subwoofers (121)

Yorkville Sound C170, Coliseum Mini 100W Two-Way Installation Speaker - 8 Inch The Yorkville Sound  C170, 100w, 8-inch / 1-inch 70V 'matching transformer' allows multiple C170's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (4, 8, 16, 32 or 100 Watts) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets. Product Specification:   System Type: 2-Way Active or Passive: Passive Power Rating (Watts): 100 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 93 Max SPL (dB): 113 Frequency Response (Hz +/- 3dB): 60 - 20000 Driver Configuration: 8 inch / 1 inch dome tweeter HF Driver(s): 1 inch Mylar Dome Tweeter LF Driver(s): 8 inch LF Power Rating(Watts): 100 LF Impedance (Ohms): 8 Inputs - 1/4" Jacks: 2 Inputs - Binding Post: Yes Feet: Yes Included Hardware: Mounting Bracket Pole Mount Adapter (1 3/8"-3.5cm): Optional Adapter (C170ADAPT) Enclosure Materials: ABS Plastic Grille: Perforated Metal Optional Covering / Finishes: Available Black or White (C170W) Dimensions (DWH xbackW, inches): 11.25 x 9.75 x 16.25 x 9.5 Dimensions (DWH xbackW, cm): 28.5 x 25 x 42 x 24 Weight (lbs/kg): 14.5 / 6.6 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound C12W, Coliseum 400 Watt 12-Inch Install Speaker 80x50 Rotatable Horn - White Coliseum 12" Installation Loudspeaker Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. With 400 watts of power handling, a 12” woofer, rotatable horn, and OmniMount-compatible rigging points, the C12W is ideal for larger commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C12W and C15W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference. Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 400 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 98 Max SPL (dB): 124 Frequency Response (Hz +/- 3dB): 55 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 12 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 80 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware bracket is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear-mount rigging points for Omnimount 60.0WA Bracket Dimensions (DWH xbackW, inches): 14.3 x 16.2 x 24.1 x 11.1 Dimensions (DWH xbackW, cm): 36.3 x 41.1 x 61.2 x 28.2 Weight (lbs/kg): 54 / 24.6 Specifications System Type: 2-WayActive or Passive: PassivePower Rating: 400 W Nominal Impedance (Ohms): 8ΩSensitivity (dB AT 1Watt/1m): 98 dBMax SPL : 124 dBFrequency Response (Hz +/- 3dB): 55 Hz - 20 kHzDispersion (H x V): 80° x 50° RotatableCrossover Frequency: 1.1 kHzDriver Configuration :1x 12" LF Driver, 1x 1" HF Driver with Rotatable ABS WaveguideHF Protection : CTLInputs: 2x speakON® 4-Pin, Screw TerminalsFlying Hardware: 1/4"Optional Flying Hardware: FH2W Flyware BracketPole Mount Adapter (1 3/8  No Enclosure Materials 15 mm (5/8") 11-ply Baltic BirchGrille: Perforated MetalCovering / Finish: Two-Part White EpoxyOther Details : Rear-Mount Rigging Points for Omnimount BracketDimensions (DWH): 14.3" x 16.2" x 24.1" (36.3 cm x 41.1 cm x 61.2 cm)Weight: 54 lbs / 24.6 cm  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NXF35U, U-Bracket Flying Hardware Kit The Yorkville NXF35U kit allows enclosures to be mounted in more ways than standard shackles and cables allow. Using the NXF35U bracket, the multiple fly-point options will enable the rig to be flown at different angles. The bracket also helps secure the NX enclosure to the truss or roofing systems. The NXF35U is easily mounted strategically to the top and bottom of the enclosure. The NX enclosure can also be rotated up to 30 degrees across the horizontal plane (within the bracket housing). Image is for illustrative purposes only. Speakers are not included. General Features: Weight: 3 lbs (1.36 kg) Dimensions: 12 x 6 x 2 inches (30 x 15 x 5 cm) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX55P-2, 2-Way Powered Loudspeaker (12 Inch) NX 12” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker or stage monitor. Featuring a 12” woofer and 2000 watts of peak power (1000 watts program), the NX55P-2 is the most powerful speaker in the NX series. The rear panel features a master level control, a selectable LF roll off for use with a subwoofer or as a vocal monitor, and a switchable onboard mixer section. When enabled, this provides an XLR microphone input and 1/4" line inputs with level controls and 2-band EQ. Link inputs and outputs provide balanced connectivity to other cabinets. Up to three onboard mixers can be active in a linked system, providing up to three mic and six line inputs without requiring an external mixer. The NX55P-2's inputs and controls are well-protected, so it can be used in any orientation. It was carefully designed for low operating temperatures and reduced heat production to be placed close to walls, floors, and other speakers. General Features: 2000 W Peak Power (1000 W Program) 12” LF Driver with 3” Voice Coil 1.4” HF Driver 1x XLR Mic Input, 2x 1/4" Line Inputs, 1x XLR and 1x 1/4” Link Inputs 1x XLR and 1x 1/4" Link Outputs Integrated Mixer with 2-Band EQ Switchable LF Rolloff for Use with Subwoofers Integrated Flying Hardware Made in Canada System Type: Powered Loudspeaker Power Rating: 2000 W Peak (1000 W Program) Biampable: Self-Powered Biamp Operation Only: Yes Sensitivity (dB AT 1Watt/1m): 100 dB Max SPL: 134 dB Peak (128 dB Continuous) Frequency Response (Hz +/- 3dB): 45 Hz - 18 kHz Crossover Frequency: 2 kHz HF Driver(s): 1.4” Aluminum Diaphragm, 1” Exit HF Dispersion (°H x °V): 80° x 50° HF Protection: Thermal / Peak Limiter LF Driver(s): 12” with 3” Voice Coil LF Protection: Thermal / Overcurrent HF Amplifier Type: 2-Tier Class H LF Amplifier Type: Class D Power Consumption (typ/max): 120 / 310 VA Inputs: 1x XLR (Mic) 2x 1/4" (Line / CD) 1x XLR 1x 1/4" Link Inputs Input Sensitivity (Vrms Sine): 1.23 Vrms Sine, +4dBv Controls: Master Level, LF Rolloff (60 Hz / 100 Hz) Mixer On / Off Mic Level Line / CD Level Treble Bass Mixer Controls: Line Level Mic Level Bass Treble Limiter: Yes LED Indicators: Power, Clip, Limit Bar Handles: 1 (Side) Flypoints : 4 (2x Top, 2x Bottom), 1x Pullback Flying Hardware: 1/4-20 Optional Flying Hardware: NXF Flyware Pole Mount Adapter (1 3/8  1 (Bottom) Enclosure Materials: Molded Polypropylene Dimensions (DWH) : 12.25" x 16" x 26.5" (31.1 cm x 40.6 cm x 67.3 cm) Weight: 41 lbs / 18.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX25P-2, 300W NX Series 2-Way Powered Loudspeaker - 12 Inch NX 12” Powered Loudspeaker NX loudspeakers have a history of traditional analog design and a reputation for road-tested reliability. Yorkville is proud to introduce the new NX12P, a thoroughly modern update to this classic series. This next-generation model offers advanced DSP, powerful limiting, extended connectivity, and exceptional sound. The NX12P works equally well as a front-of-house speaker, stage monitor, or side-fill cabinet. It features a 12” woofer and 4850 watts of peak power (1450 watts program).  In addition to the primary XLR input and output, the NX12P has an onboard three-channel mixer, so it doesn’t require an external console for small PA applications. Two mono channels each feature Combi-Jack inputs, phantom power,  switchable mic or line input levels, and switchable high-pass filters. The third channel accepts stereo 1/8" line or Bluetooth sources, including wireless stereo playback between two cabinets. The master section features a high-pass filter for use with a subwoofer or as a vocal monitor, and three selectable modes optimize EQ and dynamics for music playback, live performance, or stage monitor use. NX speakers have been trusted on stages worldwide for over 20 years, and the new NX12P is ready to inspire a new generation of performers. General Features: 4850 W Peak Power (1450 W Program) 12” LF Driver and 1” HF Driver Main Input & Output XLR Connections Onboard 3-Channel Mixer (2x Mono, 1x Stereo) with Phantom Power    Bluetooth® Wireless Streaming Switchable LF Rolloff for Use with Subwoofers Onboard DSP with 3 Voicing Modes Integrated Flying Hardware System Type: Powered Loudspeaker Power Rating: 4850W Peak (1450 W Program) Max SPL: 128 dB Peak Frequency Response (Hz +/- 3dB): 50 Hz – 20 kHz HF Driver(s):1” Exit Compression Driver LF Driver(s):12” In / Out Connections: Main In (XLR-F), Main Out (XLR-M) Channel 1 Input: 1 Combi-Jack (XLR / 1/4") Channel 1 Controls: Level, Input Type, High-Pass Filter Channel 2 Input: 1 Combi-Jack (XLR / 1/4") Channel 2 Controls: Level, Input Type, High-Pass Filter Channel 3 Input: 1/8" TRS, Bluetooth® Wireless Channel 3 Controls: Level Bar Handles: 2 (1 Side, 1 Top) Flypoints: 3 (2 Top, 1 Pullback) Flying Hardware:M8 Threading Pole Mount Adapter (1 3/8 1 (Bottom) Enclosure Materials: Polypropylene Grille: Perforated Metal Dimensions (DWH) :12.68” x 15.20” x 25.29” (32.2 cm x 38.6w cm x 64.2 cm) Weight: 45.3 lbs / 20.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX10C-2, Two-Way Coaxial 1200W Powered PA Speaker - 10/1 Inch NX 10” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker, stage monitor, or side-fill cabinet. Featuring a 10” woofer and 1200 watts of peak power (500 watts program), the NX10C-2 is the most compact, portable speaker in the NX series. The input section features an XLR mic input and XLR, 1/4", and 1/8" line inputs. Link output allows multiple NX10C-2 cabinets to be chained together using a single input source. The variable EQ control is flat at the center position, boosts treble when turned clockwise, and boosts both treble and bass when turned counter-clockwise. The NX10C-2 has been designed for easy system integration. It can be mounted under light bars, saving stage space and eliminating the need for separate lighting and speaker stands. On tight stages, it can also be mounted below the front-of-house cabinets on a single speaker stand. The rear handle also functions as a tilt stand, allowing it to be used as a compact, wide-coverage floor monitor or center-fill cabinet. General Features: 1200 W Peak Power (500 W Program 10” LF Driver with 1” Voice Coi 1” Coaxial HF Drive 1x Combi-Jack Mic/Line, 1x Combi-Jack Line, and 1x 1/8" TRS Inputs 1x XLR Link Output Variable EQ Contour - Flat, Bright (Treble Boost), or Playback (Treble & Bass Boost Through-Hole Pole Mount for Mounting Multiple Cabinets on a Single Stand Rear Handle Functions as Tilt Stand Made in Canada Powered Loudspeaker 1200 W Peak (500 W Program) Max SPL 127 dB Peak (124 dB Continuous) Frequency Response (Hz +/- 3dB) 80 Hz - 20 kHz Crossover Frequency     2.5 kHz HF Driver(s) 1” Throat, 1.4” PETP Film HF Protection  Peak Limiter LF Driver(s) 10” with 2.5" Voice Coil LF Protection Thermal / Overcurrent HF Amplifier Type Class A/B LF Amplifier Type 3-Tier Class H Power Consumption 120 / 310 VA Inputs 1x Combi-Jack (Mic / Line) 1x Combi-Jack (Line) 1x 1/8" TRS (Line) Input Sensitivity (Vrms Sine) 1.23 Vrms Sine, +4 dBu Controls Mic Level Line Level EQ Contour Limiter Yes LED Indicators Power, Clip Bar Handles 1 (Back) Pole Mount Adapter (1 3/8 Pole Through) Enclosure Materials Injection-Molded Fiber-Reinforced ABS / Aluminum / 13-Ply Birch Dimensions: (DWH)13” x 13.5” x 12” (33 cm x 34.3 cm x 30.5 cm) Weight: 25 lbs / 11.3 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Thump215XT 15-inch 1400W Enhanced Powered Loudspeaker Mackie Thump215XT 15-Inch 1400-Watt Enhanced Active Powered Speaker Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag. Four voicing modes and Bluetooth compatibility No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 20kHz Max SPL: 128 dB 15” high-performance woofer 1” compression driver 4 Application-specific voicing modes Music Live Club Monitor Outdoor mode optimizes voicing for open-air venues Bluetooth connectivity for streaming, speaker linking, and control Download the Thump Connect 2 app for complete wireless control Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration Flexible I/O ch.1 features an XLR/TRS input that accepts mic or line signals ch.2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels Built-in Feedback Eliminator reduces squeals and out of control rumble Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Front LED On/Off switch Universal Power Supply (100-240VAC) Standard pole mount M10 fly points for permanent install Monitor wedge provides an optimal angle for use as a floor monitor Weight: 29.3 lb / 13.3 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Thump212XT 1400W Boosted 12" Powered Speaker 2-Way with 3-channel Digital Mixer, and Bluetooth Streaming (each) with MR DJ Speaker Stand and 12 Feet XLR Cables Mackie Thump212XT 12-Inch 1400-Watt Enhanced Active Powered Speaker Enhance your next set with Thump212XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump212XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag. Four voicing modes and Bluetooth compatibility No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 20kHz Max SPL: 128 dB 12” high-performance woofer 1” compression driver 4 Application-specific voicing modes Music Live Club Monitor Outdoor mode optimizes voicing for open-air venues Bluetooth connectivity for streaming, speaker linking, and control Download the Thump Connect 2 app for complete wireless control Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration Flexible I/O ch.1 features an XLR/TRS input that accepts mic or line signals ch.2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels Built-in Feedback Eliminator reduces squeals and out of control rumble Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Front LED On/Off switch Universal Power Supply (100-240VAC) Standard pole mount M10 fly points for permanent install Monitor wedge provides an optimal angle for use as a floor monitor Weight: 29.3 lb / 13.3 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie THUMP212 12” 1400W Powered Loudspeaker + MR DJ SS300 Speaker Stand+MR DJ XLR6F to XLR6M XLR DJ Cable Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump 212 12" 1400W PA Speaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump 212 12" 1400W PA Speaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump 212 12" 1400W PA Speaker Package with MR DJ Stands and Bag Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Peavey PV15M 15" 2-way 1000-Watt Peak Stage Floor Monitor Speaker w/ Handle with 2 MR DJ 12' 1/4" to Speakon Cable Hear the whole band with astonishing clarity and punch! The PV 15M is a two-way system with a 15-inch Sheffield Pro 1500+ premium woofer and a 14T 1.4-inch titanium diaphragm compression driver (no piezo) coupled to a constant directivity horn with Sound Guard IV high-frequency driver protection. It is rated as a 500-watt program with a 1,000-watt peak power handling capability. This rugged, trapezoidal enclosure can be angled at 30 or 45 degrees from the floor and be pole mounted. Two 1/4-inch, full-range parallel inputs allow easy daisy-chaining. General Features: Two-way floor monitor 68 Hz to 17 kHz 15" Sheffield Pro 1500+ woofer w/ 2.5" voice coil 14T compression driver w/ titanium diaphragm 500 W program power handling Sound Guard™ IV tweeter protection carpet covering steel handle Heavy-duty metal grille die-cast aluminum pole mount 90 x 40 CD horn Weight Unpacked: 39.00 lb(17.69 kg) Weight Packed: 45.00 lb(20.412 kg) Width Packed: 19.37"(49.1998 cm) Height Packed: 26.37"(66.9798 cm) Depth Packed: 14.25"(36.195 cm) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca..

Peavey PV15M 15" 2-way 1000-Watt Peak Stage Floor Monitor Speaker w/ Handle with MR DJ SS350 Speaker Stand & MR DJ 1/4" TO 1/4" 12' Cable Hear the whole band with astonishing clarity and punch! The PV 15M is a two-way system with a 15-inch Sheffield Pro 1500+ premium woofer and a 14T 1.4-inch titanium diaphragm compression driver (no piezo) coupled to a constant directivity horn with Sound Guard IV high-frequency driver protection. It is rated as a 500-watt program with a 1,000-watt peak power handling capability. This rugged, trapezoidal enclosure can be angled at 30 or 45 degrees from the floor and be pole mounted. Two 1/4-inch, full-range parallel inputs allow easy daisy-chaining. General Features: Two-way floor monitor 68 Hz to 17 kHz 15" Sheffield Pro 1500+ woofer w/ 2.5" voice coil 14T compression driver w/ titanium diaphragm 500 W program power handling Sound Guard™ IV tweeter protection carpet covering steel handle Heavy-duty metal grille die-cast aluminum pole mount 90 x 40 CD horn Weight Unpacked: 39.00 lb(17.69 kg) Weight Packed: 45.00 lb(20.412 kg) Width Packed: 19.37"(49.1998 cm) Height Packed: 26.37"(66.9798 cm) Depth Packed: 14.25"(36.195 cm) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.